1,726 Manufacturing jobs in Singapore

• Carry out production operations, perform battery demanufacturing activities, perform equipment operating and monitoring activities.
• Carry out after recycling finished product collection into drums, bags or isotainers in a safe and efficient manner.
• Monitor closely equipment performance and finished good output discharge point to ensure product is harvested in a safe and efficient manner.
• Carry out manual work such as transferring production consumables to recycling system, manual handling production tools and jigs for recycling activities.
• Conduct line checking, and equipment flushing during batch changeover and handle regular start up, shutdown and commissioning of critical process equipment.
• Operate plant equipment such as air compressor, pumps, heat exchangers, rotary equipment etc. in a safe manner.
• Carry out minor maintenance work, 5S and Kaizen improvement projects and energy conversation initiatives.
• Adhere to all in house chemical plant safety, security, industrial hygiene standards and EHS & Quality compliance and regulations.
• Perform any other production duties assigned by the Team Leader and/or Production Supervisor.
• Operator under Battery Feeding Area (BFA): Handling battery material pre-processing and recycling preparation work with data recording on material incoming, material WIP processing and outgoing.
• Operator under Mechanical Plant Area (MPA): Machinery operation, output handling, basic maintenance and monitoring of equipment, data recording on process equipment, etc.
• Operator under Chemical Plant Area (CPA): Chemical dosing and handling, Machinery operation, output handling, basic maintenance and monitoring of equipment, data recording on process equipment, etc.
• Operator under Mechanical Vapor Recompression (MVR): Machinery operation, output handling, basic maintenance and monitoring of equipment, data recording on process equipment, etc.

• Possess a valid Singapore WSQ Forklift Operator Certificate.
• Minimum secondary education.
• Strong understanding of workplace and equipment safety protocols.
• Job training will be provided.
• Entry level is welcome.

Factory Worker

Job Responsibilities

• Clean and packaging the finished goods according to the specified requirements and standards.

• Cleaning product with ultrasonic machine.

• Meet the production deadline to ensure timely completion of cleaning and packaging.

• Ensure all packaging is done accurately and in line with quality standards.

• Help with sorting, labeling and moving materials as required.

• Report any issues or discrepancies in the production or packaging process to the manager.

Job Requirement

• No prior experience required. Full training will be provided.

Benefit

• Annual Leave

• Medical Benefit

• Friendly Working Environment

• Work Life Balance

• Air Conditioning Environment

• 5 Working Days

• Woodlands Area

We are a global leader in secure and sustainable technology lifecycle management services.

Job Responsibilities:

• Carry out production operations, perform battery demanufacturing activities, perform equipment operating and monitoring activities.
• Carry out after recycling finished product collection into drums, bags or isotainers in a safe and efficient manner.
• Monitor closely equipment performance and finished good output discharge point to ensure product is harvested in a safe and efficient manner.
• Carry out manual work such as transferring production consumables to recycling system, manual handling production tools and jigs for recycling activities.
• Conduct line checking, and equipment flushing during batch changeover and handle regular start up, shutdown and commissioning of critical process equipment.
• Operate plant equipment such as air compressor, pumps, heat exchangers, rotary equipment etc. in a safe manner.
• Carry out minor maintenance work, 5S and Kaizen improvement projects and energy conversation initiatives.
• Adhere to all in house chemical plant safety, security, industrial hygiene standards and EHS & Quality compliance and regulations.
• Perform any other production duties assigned by the Team Leader and/or Production Supervisor.
• Operator under Battery Feeding Area (BFA): Handling battery material pre-processing and recycling preparation work with data recording on material incoming, material WIP processing and outgoing.
• Operator under Mechanical Plant Area (MPA): Machinery operation, output handling, basic maintenance and monitoring of equipment, data recording on process equipment, etc.
• Operator under Chemical Plant Area (CPA): Chemical dosing and handling, Machinery operation, output handling, basic maintenance and monitoring of equipment, data recording on process equipment, etc.
• Operator under Mechanical Vapor Recompression (MVR): Machinery operation, output handling, basic maintenance and monitoring of equipment, data recording on process equipment, etc.

Job Requirement:

• Possess a valid Singapore WSQ Forklift Operator Certificate.
• Minimum secondary education.
• Strong understanding of workplace and equipment safety protocols.
• Job training will be provided.
• Entry level is welcome.

We regret to inform you that due to the high volume of applications received, only candidates who are shortlisted for the next stage of the selection process will be contacted. We appreciate your understanding and thank you for your interest in this opportunity.

Factory Worker

Job Responsibilities

• Clean and packaging the finished goods according to the specified requirements and standards.

• Cleaning product with ultrasonic machine.

• Meet the production deadline to ensure timely completion of cleaning and packaging.

• Ensure all packaging is done accurately and in line with quality standards.

• Help with sorting, labeling and moving materials as required.

• Report any issues or discrepancies in the production or packaging process to the manager.

Job Requirement

• No prior experience required. Full training will be provided.

Benefit

• Annual Leave

• Medical Benefit

• Friendly Working Environment

• Work Life Balance

• Air Conditioning Environment

• 5 Working Days

• Woodlands Area

• Apply sleeve over the finished drum

• No prior experience necessary
• Ability to work with manual labor
• Will to start immediately

Join to apply for the Manufacturing Engineer role at GE Aerospace

Join to apply for the Manufacturing Engineer role at GE Aerospace

Job Description Summary

Engineering associated with the manufacturing process. Accountable for the quality of own work. Subject to direct operations supervision/prescribed work instructions/systems checking. Executes within a well-defined operations framework. There is generally a step by step sequence of standard operational tasks which need to be followed to achieve an end result.

Job Description Summary

Engineering associated with the manufacturing process. Accountable for the quality of own work. Subject to direct operations supervision/prescribed work instructions/systems checking. Executes within a well-defined operations framework. There is generally a step by step sequence of standard operational tasks which need to be followed to achieve an end result.

Job Description

Company Overview:

Are you ready to see your career take flight? At GE Aerospace, we believe the world works better when it flies. We are a world-leading provider of jet engines, components, and integrated systems for commercial and military aircraft. We have a relentless dedication to the future of safe and more sustainable flight and believe in our talented people to make it happen.

Site Overview

For more than 40 years, our advanced facilities in Singapore have led aerospace innovation across Asia Pacific. From automating processes to leveraging smart factory technologies, robotics, and additive manufacturing, GE Aerospace is shaping the future of aviation at GE Aerospace Engine Services Singapore (GEAESS).

GEAESS is our largest site for engine component Maintenance, Repair, and Overhaul (MRO), responsible for more than 60% of our global repair volume.

Role Overview

• Design/develop/substantiate/implement new repairs.
• Ensure internal shop documents are kept current with the latest repair documents and flow changes to appropriate personnel.
• Generate, change/update OP sheets, routers.
• Track or collect data on yield and identify opportunities to improve yield; conduct new material tryouts; review process for improvements.
• Conduct salvation reviews.
• Raise and follow thru with Departure Records approval, work with REDO or GEAE engineers to enhance tech issue resolution process.
• Provide work scope for customers, draft responses to customers’ queries.
• Investigate and answer QPR/CARs.
• Where applicable, act as subject matter expert to design and develop appropriate OJT for shop CRTs.
• Engagement in lean, bullet train activities; lead cluster activities.
• Up-to-date technical/engineering documents and new business opportunities for company.
• Ensure up-to-date manuals are deployed for use – compliance.
• Proper flow down of technical operating documents for CRT use.
• Up-to-date technical/engineering documents and new business opportunities for company.
• Ensure up-to-date manuals are deployed for use – compliance.
• Proper flow down of technical operating documents for CRT use.
• Customer benefit, yield improvement and additional business for organization.
• Ensure proper technical qualifications are completed for either transitions in or out of GE Aerospace.
• Compliance/Customer Satisfaction – timely response & closure.
• Skills development & enhancement for shop CRTs.
• Support business productivity & cost efficiency drive efforts
  
  

• Bachelor's degree in Mechanical/Aerospace
• Related Engineering fields 3 years of experience in manufacturing environment will be an advantage
• Aviation maintenance repair and/or overhaul environment preferred.
  
  

• Strong oral and written communication skills.
• Strong interpersonal and leadership skills.
• Ability to work independently.
• Strong problem solving skills.
  
  

• Seniority level Entry level

• Employment type Full-time

• Job function Engineering and Information Technology
• Industries Aviation and Aerospace Component Manufacturing

Referrals increase your chances of interviewing at GE Aerospace by 2x

Get notified about new Manufacturing Engineer jobs in Singapore, Singapore .

We’re unlocking community knowledge in a new way. Experts add insights directly into each article, started with the help of AI.

Join to apply for the Manufacturing Engineer role at Ultra Clean Technology

Join to apply for the Manufacturing Engineer role at Ultra Clean Technology

Get AI-powered advice on this job and more exclusive features.

Job Summary:

Responsible to assist in supporting the production build of various systems on the manufacturing floor. Responsible for planning and conducting independent work requiring judgment in the evaluation, selection, application and adaptation of Manufacturing techniques, procedures and criteria. Devise new approaches to problems, and prepare or modify drawings, specifications, calculations, charts and graphs, and monitor work for compliance to applicable build and quality standards.

Job Summary:

Responsible to assist in supporting the production build of various systems on the manufacturing floor. Responsible for planning and conducting independent work requiring judgment in the evaluation, selection, application and adaptation of Manufacturing techniques, procedures and criteria. Devise new approaches to problems, and prepare or modify drawings, specifications, calculations, charts and graphs, and monitor work for compliance to applicable build and quality standards.

Essential Duties and Responsibilities:

• Requires a broad knowledge of Manufacturing Practices, Assembly Prints, Bill of Materials to be able to create Manufacturing ready documentation such as S.O.E.’s (Sequence of Events) and Assembly Process Workflow.
• Establish process for manufacturing and create work instruction for assembly in MES System.
• Provides technical direction and on-the-job training to production staff.
• Evaluate manufacturing process and create process control plan, PFMEA and Risk assessment.
• Must comply to POR and CE! Compliance.
• Work with Manufacturing, Engineering, Quality department to drive Continuous improvement on quality, efficiency and manufacturing cycle time.
• Initiate and support Design For Excellence and manufacturing process improvement / standardization.
• Engage with IE to optimize layout and product layout floor for new and existing plants
• Implement Lean line using DFT concept with relevant Jig and Fixture.
• Technical solve and support for trouble shooting issue, quality issue, first pass yield issue
• Participate in product transfer: Coordinate the team for training, understand the equipment, facility requirement, build and test requirements)
• Liaise and coordinate with Engineering and Material department on spec, BOM and material changes/issues
• Liaise and coordinate with Quality department on Supplier quality and Customer quality issue including RCCA, 8D preparation.
• Liaise and coordinate with Test Engineering department on testing development or testing issue
• Liaise with customer for all BOM / drawing / design issue by generating problem report / supplier problem sheet / Supplier request deviation with single page summary.
• Involve in MRB (Material Review Board) meeting, make justifiable disposition, analyst data and work with relevant departments / suppliers to reduce non-conformance.
• Minimum CAD knowledge to analyst 3D drawing from customer.
• Initiate Engineering change and waiver for any change required.
• Working in ERP System for engineering master control and change.
  
  

• Lean Manufacturing Principles, Six Sigma Greenbelt preferred.
• Familiarity with semiconductor capital equipment.
• Knowledge of electronic Work Instruction software is a plus (i.e. Sequence).
• ERP System Software
• Excellent computer skills in Microsoft Suite, emphasis in Excel.
• Prior experience leading small teams to achieve project success.
• Good Interpersonal skills; ability to work alone or in team environment.
  
  

• Bachelor’s Degree in Mechanical/Electrical/Electronics /Mechatronics/Industrial Systems Engineering.
• Diploma in Mechanical / Electrical / Electronics / Mechatronics / Industrial Systems Engineering with minimum 5 years working experience in related field can apply.
  
  

• Minimum 2 years relevant experience (5 years for diploma holder)
• Exposure to semiconductor industry preferred.
• Experience on setting up lean line will be very important
• Know and able to explore full BOM structure (more than 1,000 line) is needed.
• Self-motivated and resourceful
• Possesses drive with “can-do” attitude
• Capable of developing positive work relationship, a favourable work environment within the team and other functional group
• Must able to perform and demonstrate good workmanship understanding according to industrial standard.
• Good interpersonal, communication and presentation skill.
• Able to perform any other task assigned by manager / supervisor.
• Comply to work ethics and integrity.
• Candidate with Six Sigma Knowledge is a plus

• Seniority level Mid-Senior level

• Employment type Full-time

• Job function Engineering and Information Technology
• Industries Semiconductor Manufacturing

Referrals increase your chances of interviewing at Ultra Clean Technology by 2x

We’re unlocking community knowledge in a new way. Experts add insights directly into each article, started with the help of AI.

Job Summary:

Responsible to assist in supporting the production build of various systems on the manufacturing floor. Responsible for planning and conducting independent work requiring judgment in the evaluation, selection, application and adaptation of Manufacturing techniques, procedures and criteria. Devise new approaches to problems, and prepare or modify drawings, specifications, calculations, charts and graphs, and monitor work for compliance to applicable build and quality standards.

Essential Duties and Responsibilities:

• Requires a broad knowledge of Manufacturing Practices, Assembly Prints, Bill of Materials to be able to create Manufacturing ready documentation such as S.O.E.’s (Sequence of Events) and Assembly Process Workflow.
• Establish process for manufacturing and create work instruction for assembly in MES System.
• Provides technical direction and on-the-job training to production staff.
• Evaluate manufacturing process and create process control plan, PFMEA and Risk assessment.
• Must comply to POR and CE! Compliance.
• Work with Manufacturing, Engineering, Quality department to drive Continuous improvement on quality, efficiency and manufacturing cycle time.
• Initiate and support Design For Excellence and manufacturing process improvement / standardization.
• Engage with IE to optimize layout and product layout floor for new and existing plants
• Implement Lean line using DFT concept with relevant Jig and Fixture.
• Technical solve and support for trouble shooting issue, quality issue, first pass yield issue
• Participate in product transfer: Coordinate the team for training, understand the equipment, facility requirement, build and test requirements)
• Liaise and coordinate with Engineering and Material department on spec, BOM and material changes/issues
• Liaise and coordinate with Quality department on Supplier quality and Customer quality issue including RCCA, 8D preparation.
• Liaise and coordinate with Test Engineering department on testing development or testing issue
• Liaise with customer for all BOM / drawing / design issue by generating problem report / supplier problem sheet / Supplier request deviation with single page summary.
• Involve in MRB (Material Review Board) meeting, make justifiable disposition, analyst data and work with relevant departments / suppliers to reduce non-conformance.
• Minimum CAD knowledge to analyst 3D drawing from customer.
• Initiate Engineering change and waiver for any change required.
• Working in ERP System for engineering master control and change.

Other Duties

Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice.

Knowledge, Skills and Abilities:

• Lean Manufacturing Principles, Six Sigma Greenbelt preferred.
• Familiarity with semiconductor capital equipment.
• Knowledge of electronic Work Instruction software is a plus (i.e. Sequence).
• ERP System Software
• Excellent computer skills in Microsoft Suite, emphasis in Excel.
• Prior experience leading small teams to achieve project success.
• Good Interpersonal skills; ability to work alone or in team environment.

Educational/Certification Requirement :

• Bachelor’s Degree in Mechanical/Electrical/Electronics /Mechatronics/Industrial Systems Engineering.
• Diploma in Mechanical / Electrical / Electronics / Mechatronics / Industrial Systems Engineering with minimum 5 years working experience in related field can apply.

Experience Requirement:

• Minimum 2 years relevant experience (5 years for diploma holder)
• Exposure to semiconductor industry preferred.
• Experience on setting up lean line will be very important
• Know and able to explore full BOM structure (more than 1,000 line) is needed.
• Self-motivated and resourceful
• Possesses drive with “can-do” attitude
• Capable of developing positive work relationship, a favourable work environment within the team and other functional group
• Must able to perform and demonstrate good workmanship understanding according to industrial standard.
• Good interpersonal, communication and presentation skill.
• Able to perform any other task assigned by manager / supervisor.
• Comply to work ethics and integrity.
• Candidate with Six Sigma Knowledge is a plus

Créée en 2007, Antaes est une société suisse de conseil en management et technologie classée dans le top 15 des sociétés de conseil en Suisse. Nous comptons plus de 300 ingénieurs expérimentés qui partagent notre passion.

Présents en Suisse, à Singapour, à Hong-Kong et en France, nous accompagnons nos clients suisses, et internationaux en intervenant dans les domaines suivants :

• Conseil en organisation et transformation
• Ingénierie Industrielle
• Management des systèmes d'Information

En rejoignant nos équipes vous découvrirez :

• Une équipe dynamique dans un esprit start-up
• Un accompagnement humain et un suivi de l’évolution de votre carrière
• Des challenges pour contribuer au développement de votre réseau
• Des événements : team building, meet-up, workshop, Winter Event …

Une entreprise certifiée @HappyAtWork et ayant une politique RSE engagée (médaille d’or Ecovadis2023)

Suisse - Genève

Ingénierie Industrielle et Life-Science

Créer un macro-planning pour 200-300 projets immobiliers hospitaliers, en visualisant les étapes clés Hermès (Initialisation, Conception, Réalisation, Déploiement), via un outil comme MS Project ou Th.

• Elaborer la stratégie CQV pour un type d’installations spécifique et être responsable de la mise en œuvre du plan de validation,
• Se conformer à toutes les normes et SOPs applicables (internes et externes),
• S’assurer du respect des bonnes pratiques documentaires par les fournisseurs,
• Être support dans les phases de commissioning FAT et SAT,
• Revue de la documentation de qualification (design, protocoles QI/QO/QP et rapports, matrices de traçabilité, analyses de risques),
• Suivi de l’exécution des tests,
• Collaboration avec différentes équipes projet pour s’assurer de la bonne réalisation des activités de qualification / validation,
• Participer aux inspections des autorités.

Suisse - Genève

Ingénierie Industrielle et Life-Science

Nous recherchons un consultant Chef de Projet pour gérer l'optimisation des espaces administratifs des bâtiments hospitaliers à Genève.

Le projet vise à améliorer le confort et à optimiser les surfaces administratives sur le site hospitalier. Il s’inscrit dans une logique de regroupement des directions sur des sites stratégiques, en réponse à la croissance constante de la demande de surfaces.

Vous accompagnerez la cheffe de projet dans le pilotage global du projet. Votre rôle sera d'assurer une coordination efficace des actions, de documenter les étapes clés, de préparer les livrables attendus et de garantir la réussite du projet dans les délais et le budget impartis.

• Appui au pilotage stratégique et opérationnel du projet,
• Préparation des COPIL et rédaction des PV,
• Élaboration et suivi des outils de pilotage : Gantt, RACI, matrice des risques, budget, RIDA,
• Analyse des besoins des équipes et coordination des déménagements,
• Suivi des aménagements, équipements, désengagements,
• Participation au bilan final et à l’enquête de satisfaction.

Suisse - Genève

Ingénierie Industrielle et Life-Science

• Réaliser les études de faisabilité, conception et exécution selon cahier des charges,
• Élaborer budgets, plannings et propositions techniques,
• Gérer les lots génie chimique et mécanique (planning, suivi livrables, avancement, budgets),
• Rédiger les spécifications techniques et coordonner les échanges avec les fournisseurs,
• Superviser les chantiers, assurer la mise en route et la qualité des projets.