37,819 Graduate jobs in Singapore

• Pre-sales engineering network design, radio frequency passive and/or active planning, bill of material creation, sales opportunity engagement, and technical training individually or in larger group settings
• Identifying and driving the development of a territory account plan based on awareness of the business economics and trends of the industries, including vertical markets
• Have a working knowledge of RUCKUS Networks wireless, wired and software solutions
• Act as a trusted technical advisor to customers and partners with the ability to differentiate and competitively position RUCKUS solutions
• Assist the Territory and/or Partner Account Manager in driving revenue and selling solutions to achieve quota goals

• • • 10+ years of Systems engineering experience.
    • Minimum 5 years pre-sales or equivalent experience working with route, switch, and Wi-Fi technologies
    • A professional or associate level networking industry certification such as CCNA, BPIPA, JNCIA, Cisco, Aruba, RUCKUS, CWNA, etc. is preferred
    • Strong ability to support and manage the process of troubleshooting complex problems
    • Highly effective technical presentation skills
    • Strong verbal and written communications skills

• • • A proficient understanding of pre-sales engineering, technical sales processes, and critical account management
    • Ability to communicate both written and oral technical solutions to a variety of audiences that include executive level decision makers
    • Advanced understanding of partner business drivers and how to map these to a customer network environment, including identification of improvement areas in network design
    • Working knowledge of networking technical skills; specifically, 802.11 Wi-Fi technology evolution releases (Wi-Fi 5, 6, 7), RF antenna signal propagation behavior, best practices design and assessment, predictive heat map creation, wireless troubleshooting, wireless network optimization, IP routing and switching WAN/LAN design, setup and configuration, Layer 4-7 application services, security authentication methods and products, SASE, SD-WAN, RADIUS, AD, Virtualization environments/deployments, VM installations, (any of VMWare, KVM, Hyper-V, GCE, Azure, AWS), secure device/user onboarding solutions, etc. DevOps/REST or other common API programming knowledge a plus
    • General knowledge of the following areas of specialization: Cloud services (SaaS); VLAN; security; VoIP; QoS wired/wireless; BYOD/MDM; P2P; mesh; wireless controller architectures; Wi-Fi protocols and transmission, RF design, indoor and outdoor wireless deployments; packet capture/analysis tools; and WLAN security
    • Working knowledge of wi-fi design tools such as Ekahau, TamoGraph, Air Magnet, etc.

Who we are

Build your best future with the Johnson Controls team.

As a global leader in smart, healthy and sustainable buildings, our mission is to reimagine the performance of buildings to serve people, places and the planet. Join a winning team that enables you to build your best future! Our teams are uniquely positioned to support a multitude of industries across the globe. You will have the opportunity to develop yourself through meaningful work projects and learning opportunities. We strive to provide our employees with an experience, focused on supporting their physical, financial, and emotional wellbeing. Become a member of the Johnson Controls family and thrive in an empowering company culture where your voice and ideas will be heard – your next great opportunity is just a few clicks away!

What you will do:

The Senior Project Engineer will lead the technical delivery of Building Management System (BMS) projects for mission-critical data centers. This includes detailed engineering design, system integration, testing, and commissioning. The role requires advanced technical expertise in BMS platforms, strong understanding of data center MEP systems, and the ability to manage subcontractors, suppliers, and junior engineers to ensure on-time, high-quality delivery.

How you will do it:

Engineering & Design

• Review and interpret project specifications, drawings, and client requirements for BMS scope.
• Prepare engineering documentation including I/O schedules, control panel layouts, control logic sequences, and system architecture diagrams.
• Ensure compliance with industry standards and data center Tier requirements.
• Coordinate integration of BMS with:
• Electrical Systems: UPS, switchgear, generators, PDUs.
• Mechanical Systems: chillers, CRAC/CRAH, cooling towers, pumps.
• Fire Systems: alarms, suppression, VESDA.

Project Execution & Coordination

• Lead BMS technical execution from design to commissioning.
• Coordinate with MEP, IT, and controls teams to ensure system compatibility and optimal performance.
• Supervise subcontractors during installation and ensure adherence to quality and safety requirements.
• Support the Project Manager in progress reporting, schedule updates, and change management.

Testing, Commissioning & Handover

• Develop and execute testing protocols:
• Factory Acceptance Testing (FAT)
• Site Acceptance Testing (SAT)
• System Integration Testing (SIT)
• Integrated Systems Testing (IST) for data center readiness.
• Review and validate graphics, alarms, and control sequences before handover.
• Ensure as-built documentation, O&M manuals, and training are completed and approved.

Technical Leadership

• Mentor junior engineers and technicians, providing guidance on best practices and technical problem-solving.
• Review vendor designs and shop drawings for compliance.
• Serve as the technical escalation point for BMS-related issues.

What we look for:

• Bachelor’s degree in Electrical, Mechanical, Mechatronics, or Controls Engineering.
• Certifications in BMS platforms (e.g Easy IO Jace,   Honeywell EBI, Johnson Controls Metasys) preferred.
• Data center certifications such as CDCP® / CDCS® advantageous.
• Minimum of 5 years’ experience in BMS project engineering, with a proven track record of delivering complex BMS integrations for enterprise-level data center projects.
• Hands-on experience in design, installation, and commissioning of complex BMS systems.
• Strong knowledge of integration protocols (BACnet, Modbus, OPC, SNMP).
• Strong technical troubleshooting and problem-solving skills.
• Ability to read and interpret MEP drawings and control system schematics.
• Proficient in MS Office, AutoCAD, and project management tools.
• Excellent communication and coordination skills.

What we offer:

• Competitive salary
• Paid vacation/holidays/sick time
• Comprehensive benefits package
• On the job/cross training opportunities
• Encouraging and collaborative team environment
• Dedication to safety through our Zero Harm policy

#LI-GO1

#LI-Onsite

Who we are

Build your best future with the Johnson Controls team.

As a global leader in smart, healthy and sustainable buildings, our mission is to reimagine the performance of buildings to serve people, places and the planet. Join a winning team that enables you to build your best future! Our teams are uniquely positioned to support a multitude of industries across the globe. You will have the opportunity to develop yourself through meaningful work projects and learning opportunities. We strive to provide our employees with an experience, focused on supporting their physical, financial, and emotional wellbeing. Become a member of the Johnson Controls family and thrive in an empowering company culture where your voice and ideas will be heard – your next great opportunity is just a few clicks away!

What you will do:

• Manage a portfolio of complex initiatives that span one or multiple lines of business

• Provide on-site leadership for project team by building and motivating team members to meet project goals

• Ownership in team P&L

How you will do it:

• Support in pre-sales scoping, deliverables and cost effectiveness with sales, procurement and control manager

• Drive and monitor Fulfillment 5 (cost, cash, schedule, quality EHS) cadence in team

• Develop project management plan in planning, monitoring and execution and handover phases inclusive of resources and cashflow planning

• configuration, system cabling routing plan/drawing and programming of devices in accordance with the project requirement

• Full project life cycle ownership: successful project delivery will include full implementation from initiation to deployment for one or more initiatives simultaneously

• Report on project success criteria results, metrics, testing, and deployment management activities

• Work creatively and analytically in a problem-solving environment demonstrating teamwork, innovation, and excellence

• Participate in establishing practices, templates, policies, tools, and partnerships that facilitate project success

• Prepare estimates and detailed project plan for all phases of the project

• Procure and manage adequate resources to achieve project objectives in planned timeframes

• Manage the day-to-day project activities and resources

• Monitor staff performance and complete performance reviews

• Provide status reporting regarding project milestones, deliverable, dependencies, risks, and issues

• Understand interdependencies between technology, operations, and business needs

• Manage ongoing quality control and participate in quality issue resolution

• Assist in dispute, negotiation, arbitration, or litigation, as needed

• Support formal/informal schedules to manage the engagement contract

• Delegate tasks and responsibilities to appropriate personnel

• Coach, mentor, motivate, and supervise project and program team

• Effectively communicate with superiors, team members, clients, and other stakeholders

• Continue professional development in order to keep abreast of emerging technologies, methods, and best practices

• Lead BMS projects in Singapore

• Conduct regular project operation review with ops engineers to monitor, track and update projects status, task (Do-say ratio)

• In charge of team's PH project projects as a team leader

• Ownership in team P&L

• Support in pre-sales scoping, deliverables and cost effectiveness with sales, procurement and control manager

• Lead and Work and Prepare submission of engineering submittals including system

• Develop project management plan in planning, monitoring and execution and handover phases inclusive of resources and cashflow planning configuration, system cabling routing plan/drawing and programming of devices in accordance with the project requirement

• Define scope, budget and schedule for operation project

• Develop Cash flow planning & control

• Device activity and resource planning

• Develop project budget in consideration with cost optimization

• Manage and track changes order in project scope, schedule and cost using PM tools

• Perform risk management to minimize project risk and report/escalate to Management as needed with appropriate contingence resolution

• Conduct regular team operation review to monitor & track and update progress, task and project health

• Manage and lead scope changes for project operation

• Manage resource assignment, work allocation and E&E implementation

• Ensure OHI of team

• Ensure that project deliverables meet customer expectation

• Ensure and manage good and healthy relationship with client and all stakeholders

• Drive High performance attitude to raise project execution effectiveness

• Ensure for UBR reduction, AR and cash collection

• Project contract & specification fundamental know how

• Ensure projects operation financial KPI is monitor, track, deliverable are met in timely manner

What we look for:

• Bachelor's Degree in appropriate field of study or equivalent work experience

• 10+ years of project management experience, including tracking and planning projects

• 5+ years of experience with full product lifecycle with understanding of development lifecycle and various technology methodologies that support that lifecycle

• Intermediate level of proficiency with MS Project, Excel, Visio, PowerPoint, and SharePoint, with experience presenting to stakeholders and / or Senior Leadership

• Interpersonal skills to influence and spur change, facilitate, and enhance performance within a cross- functional environment

• Demonstrate decisiveness in resolving business problems, making decisions, and identifying priorities

• Experience negotiating vendor contracts

• Experience drafting and submitting budget proposals and recommending subsequent budget changes where necessary

• Experience in successfully leading projects and programs on-time, on-schedule. and within budget parameters

• Experience leading, motivating, and managing various project and program team sizes, including internal and external resources, while holding team accountable for performance

• Experience influencing and gaining buy-in from executives, sponsors, team members, stakeholders, and peers

What we offer:

• Competitive salary

• Paid vacation/holidays/sick time

• Comprehensive benefits package

• On the job/cross training opportunities

• Encouraging and collaborative team environment

• Dedication to safety through our Zero Harm policy

#LI-GO1

#LI-Onsite

Who we are

Build your best future with the Johnson Controls team.

As a global leader in smart, healthy and sustainable buildings, our mission is to reimagine the performance of buildings to serve people, places and the planet. Join a winning team that enables you to build your best future! Our teams are uniquely positioned to support a multitude of industries across the globe. You will have the opportunity to develop yourself through meaningful work projects and learning opportunities. We strive to provide our employees with an experience, focused on supporting their physical, financial, and emotional wellbeing. Become a member of the Johnson Controls family and thrive in an empowering company culture where your voice and ideas will be heard – your next great opportunity is just a few clicks away!

What you will do:

As Senior Project Manager, you will supervises the execution of the most basic projects. Serves as primary on-site project leader, following standardized project management procedures. Uses standard tracking tools to report project progress. Evaluates project costs and progress against budget and plan.

How you will do it:

• Strong fundamental knowledge of HVAC system and equipment.
• Meeting with clients and establishing their requirements
• Producing, reviewing and implementing appropriate documentation including: pre-construction information, schedules of work, specifications, schematics and drawings for tender for each project
• Manage a portfolio of approved Mechanical and Electrical (M&E) contractors through the lifecycle of a project
• Project cost procurement, analysis, appraisal and budgeting
• Communicating with clients and colleagues, engaging with specialist consultants as required
• Ensuring that programmes are agreed between the client and the contractor prior to each project commencing, updated as required and that key deadlines are met
• Ensure M&E services are installed correctly and to the correct specification
• Monitoring working practices, managing contractors and reporting lack of compliance to your line manager
• Ensuring compliance with Health, Safety and Fire, ACOP's and company policies
• Ensuring receipt of relevant certification, correspondence, documents, drawings, and financial records
• Provide technical support where required to other internal departments
• Project analysis and clear progress reporting to management as required
• Read and understand the limits to the required scope of work (when is a change order is required)
• Understand how to find the notice requirements for constructive changes, delays or project acceleration
• Determine the pricing for the job
• Know and understand the closeout requirements
• Know and understand the term of the contract or period for performance.
• Know and understand how the “Contract Amendment/Change Order Process” is addressed in the contract
• Conduct the pre-job meeting
• Invite all project team members to the pre-job meeting.
• Reporting Controls and Safety
• Prepare the pre-job meeting agenda
• Review minutes and distribute to attendees

What we look for:

• Minimum B.Sc/B.Eng Electrical/Power/Mechanical or related field
• 10-12 years working experience/knowledge of HVAC Retrofit, design and cost management as an HVAC Project Manager or similar position in Commercial, Institutional and Industrial Environment
• Profound knowledge of Chiller Plant Optimization.
• Strong Leadership & Team Player
• Proficient in AUTOCAD, REVIT, Microsoft software (Project, Word, Excel, Outlook, Visio and PowerPoint)
• Experience managing large commercial, institutional and Industrial Projects $20 million and above preferred
• Estimating experience and knowledge of site surveying, project sequencing, methods and materials practices and electrical systems
• Can be a combination of training, education and relevant work experience that is equivale.

What we offer:

• Competitive salary

• Paid vacation/holidays/sick time

• Comprehensive benefits package

• On the job/cross training opportunities

• Encouraging and collaborative team environment

• Dedication to safety through our Zero Harm policy

#LI-WH1

#LI-Onsite

Who we are

Build your best future with the Johnson Controls team.

As a global leader in smart, healthy and sustainable buildings, our mission is to reimagine the performance of buildings to serve people, places and the planet. Join a winning team that enables you to build your best future! Our teams are uniquely positioned to support a multitude of industries across the globe. You will have the opportunity to develop yourself through meaningful work projects and learning opportunities. We strive to provide our employees with an experience, focused on supporting their physical, financial, and emotional wellbeing. Become a member of the Johnson Controls family and thrive in an empowering company culture where your voice and ideas will be heard – your next great opportunity is just a few clicks away!

What you will do:

The Senior Application Engineer will lead the application engineering team in providing technical support, primarily focusing on customer quotations and business development case studies across various composite applications. This role emphasizes understanding customer requirements and swiftly demonstrating how composite-based solutions can effectively address their needs, including cost, timing, and resource requirements outlined in proposals. Travel to customer facilities will be essential for in-depth discussions about future opportunities alongside the business development team.

How you will do it:

• Oversee the application engineering team, providing configuration, enhancement, and support for technical documentation and presentations to clients.
• Customize and introduce new features to Metasys software and in-house developed applications based on end-user requirements.
• Design and construct new applications tailored to meet customer specifications and needs.
• Guide application engineers in writing and executing tests on complex programming, troubleshooting issues as they arise, and supporting product launches.
• Provide technical support and troubleshoot application issues while performing tests on complex programming and assisting in product launches.
• Assist the application manager in process improvements to enhance productivity and efficiency.
• Collaborate with system integrators (SI) to monitor their performance with quality assurance/quality control checks and ensure completion sign-off.
• Guide application engineers in executing software upgrades and managing software licensing.
• Manage vendor relationships, including scoping application services and reviewing deliverables.
• Collaborate as part of a design, engineering, and operations team.
• Knowledge of ACMV and controls associated with Johnson Controls Metasys will be advantageous.

To supervise Application Engineers on their following tasks:

• Deliver customer support by responding to technical queries with detailed analyses of building management systems, tooling costs, and design/process improvements to meet all customer needs.
• Collaborate with engineering, sales, and operations teams to understand standard fabrication techniques, composite materials, and customer demands to develop design details.
• Create and present technical engineering information based on customer proposals, including 3D representations of products and tooling.
• Prepare cost estimates by analyzing blueprints, customer documents, and consulting with engineers and technical personnel.
• Conduct conceptual designs of composite components and assemblies to support proposals.
• Generate accurate CAD models of components and assemblies.
• Develop detailed bills of materials for proposals. 

What we look for:

• Bachelor's Degree in Engineering with a minimum of 5 years of relevant experience.
• Experience in transportation composites or other composite applications preferred.
• Knowledge of BMS programming is require
• Willing to learn new things

What we offer:

• Competitive salary
• Paid vacation/holidays/sick time
• Comprehensive benefits package
• On the job/cross training opportunities
• Encouraging and collaborative team environment
• Dedication to safety through our Zero Harm policy

#LI-GO1

#LI-Onsite

Who we are

Build your best future with the Johnson Controls team.

As a global leader in smart, healthy and sustainable buildings, our mission is to reimagine the performance of buildings to serve people, places and the planet. Join a winning team that enables you to build your best future! Our teams are uniquely positioned to support a multitude of industries across the globe. You will have the opportunity to develop yourself through meaningful work projects and learning opportunities. We strive to provide our employees with an experience, focused on supporting their physical, financial, and emotional wellbeing. Become a member of the Johnson Controls family and thrive in an empowering company culture where your voice and ideas will be heard – your next great opportunity is just a few clicks away!

What you will do:

The Project Manager will be responsible for managing the design, implementation, integration, and commissioning of Building Management Systems (BMS) for mission-critical data center facilities. This role requires deep technical knowledge of BMS platforms, data center infrastructure systems, and strong project management skills to ensure projects are delivered on time, within budget, and to quality standards while meeting uptime and operational requirements.

How you will do it:

1. Project Planning & Execution  

• Define BMS project scope, objectives, and deliverables in alignment with data center design and operational requirements. 
• Develop and manage detailed project schedules, budgets, and resource plans. 
• Coordinate with design consultants, MEP engineers, IT teams, and BMS vendors to ensure integrated project delivery.

2. Technical Oversight

• Oversee BMS design reviews, ensuring compliance with specifications, data center Tier standards, and client requirements. 
• Ensure integration of BMS with other systems, including: 
• Electrical Systems: UPS, switchgear, generator control panels. 
• Mechanical Systems: chillers, CRAC/CRAH units, cooling towers, pumps.
• Validate control logic, graphics, and alarm strategies.
• Supervise installation, point-to-point testing, and commissioning.

3. Stakeholder & Vendor Management  

• Manage vendor selection, tender evaluation, and contract negotiations for BMS packages.
• Coordinate between multiple stakeholders including client, consultants, contractors, and equipment suppliers. 
• Organize and lead project coordination meetings, documenting progress and action items.

4. Risk, Safety, and Compliance  

• Identify risks related to schedule, quality, and integration; implement mitigation plans.
• Ensure all works comply with workplace safety, data center operational protocols. 

5. Testing, Commissioning & Handover

• Lead Factory Acceptance Tests (FAT) and Site Acceptance Tests (SAT).
• Oversee system integration testing (SIT) and Integrated Systems Testing (IST).
• Ensure proper documentation: as-built drawings, operation manuals, and training materials. 
• Manage smooth handover to operations teams.

What we look for:

• Bachelor’s degree in Electrical, Mechanical, or Controls Engineering.
• PMP®, PRINCE2®, or equivalent project management certification preferred.
• Knowledge of BMS platforms such as Jace Easy IO Tridium Niagra, Siemens Desigo, Honeywell EBI, or Johnson Controls Metasys.
• 5–10 years of project management experience, with at least 3 years in BMS projects for mission-critical facilities or large commercial buildings.
• Proven track record in delivering complex BMS integrations for enterprise-level data center projects.
• Strong technical knowledge of MEP systems, control systems architecture, and integration protocols (BACnet, Modbus, OPC, etc.).
• Proficient in project management software (MS Project, Primavera) and documentation tools.
• Excellent stakeholder communication, coordination, and negotiation skills.
• Ability to work under pressure in high-availability, fast-paced environments.

What we offer:

• Competitive salary
• Paid vacation/holidays/sick time
• Comprehensive benefits package
• On the job/cross training opportunities
• Encouraging and collaborative team environment
• Dedication to safety through our Zero Harm policy

#LI-GO1

#LI-Onsite

Who we are

Build your best future with the Johnson Controls team.

As a global leader in smart, healthy and sustainable buildings, our mission is to reimagine the performance of buildings to serve people, places and the planet. Join a winning team that enables you to build your best future! Our teams are uniquely positioned to support a multitude of industries across the globe. You will have the opportunity to develop yourself through meaningful work projects and learning opportunities. We strive to provide our employees with an experience, focused on supporting their physical, financial, and emotional wellbeing. Become a member of the Johnson Controls family and thrive in an empowering company culture where your voice and ideas will be heard – your next great opportunity is just a few clicks away!

What you will do:

The Project Manager will be responsible for managing the design, implementation, integration, and commissioning of Building Management Systems (BMS) for mission-critical data center facilities. This role requires deep technical knowledge of BMS platforms, data center infrastructure systems, and strong project management skills to ensure projects are delivered on time, within budget, and to quality standards while meeting uptime and operational requirements.

How you will do it:

1. Project Planning & Execution  

• Define BMS project scope, objectives, and deliverables in alignment with data center design and operational requirements. 
• Develop and manage detailed project schedules, budgets, and resource plans. 
• Coordinate with design consultants, MEP engineers, IT teams, and BMS vendors to ensure integrated project delivery.

2. Technical Oversight

• Oversee BMS design reviews, ensuring compliance with specifications, data center Tier standards, and client requirements. 
• Ensure integration of BMS with other systems, including: 
• Electrical Systems: UPS, switchgear, generator control panels. 
• Mechanical Systems: chillers, CRAC/CRAH units, cooling towers, pumps.
• Validate control logic, graphics, and alarm strategies.
• Supervise installation, point-to-point testing, and commissioning.

3. Stakeholder & Vendor Management  

• Manage vendor selection, tender evaluation, and contract negotiations for BMS packages.
• Coordinate between multiple stakeholders including client, consultants, contractors, and equipment suppliers. 
• Organize and lead project coordination meetings, documenting progress and action items.

4. Risk, Safety, and Compliance  

• Identify risks related to schedule, quality, and integration; implement mitigation plans.
• Ensure all works comply with workplace safety, data center operational protocols. 

5. Testing, Commissioning & Handover

• Lead Factory Acceptance Tests (FAT) and Site Acceptance Tests (SAT).
• Oversee system integration testing (SIT) and Integrated Systems Testing (IST).
• Ensure proper documentation: as-built drawings, operation manuals, and training materials. 
• Manage smooth handover to operations teams.

What we look for:

• Bachelor’s degree in Electrical, Mechanical, or Controls Engineering.
• PMP®, PRINCE2®, or equivalent project management certification preferred.
• Knowledge of BMS platforms such as Jace Easy IO Tridium Niagra, Siemens Desigo, Honeywell EBI, or Johnson Controls Metasys.
• 5–10 years of project management experience, with at least 3 years in BMS projects for mission-critical facilities or large commercial buildings.
• Proven track record in delivering complex BMS integrations for enterprise-level data center projects.
• Strong technical knowledge of MEP systems, control systems architecture, and integration protocols (BACnet, Modbus, OPC, etc.).
• Proficient in project management software (MS Project, Primavera) and documentation tools.
• Excellent stakeholder communication, coordination, and negotiation skills.
• Ability to work under pressure in high-availability, fast-paced environments.

What we offer:

• Competitive salary
• Paid vacation/holidays/sick time
• Comprehensive benefits package
• On the job/cross training opportunities
• Encouraging and collaborative team environment
• Dedication to safety through our Zero Harm policy

#LI-GO1

#LI-Onsite

Who we are

Build your best future with the Johnson Controls team.

As a global leader in smart, healthy and sustainable buildings, our mission is to reimagine the performance of buildings to serve people, places and the planet. Join a winning team that enables you to build your best future! Our teams are uniquely positioned to support a multitude of industries across the globe. You will have the opportunity to develop yourself through meaningful work projects and learning opportunities. We strive to provide our employees with an experience, focused on supporting their physical, financial, and emotional wellbeing. Become a member of the Johnson Controls family and thrive in an empowering company culture where your voice and ideas will be heard – your next great opportunity is just a few clicks away!

What you will do:

The Senior Application Engineer (Data Center Project) is responsible for technical support – primarily customer quotations and business development case studies for various composite applications. Key emphasis will be on the ability to understand customer requirements and rapidly demonstrate how composite based solutions can be utilized to provide solutions with costing, timing, and resources included in the proposals. This position will require travel with the business development team to customer facilities during visits to discuss these future opportunities in depth.

How you will do it:

• Provides customer support by responding to requests for technical queries with detailed analysis of building management system, schedule of creation, tooling costing, and submittal of design and process improvements, when applicable, to meet all customer product needs.

• Works with engineering, sales, and ops staff to understand standard component fabrication techniques, standard composite materials to use, and current demands of our customers to formulate design details for the sales staff and our customers.

• ·Provides product technical engineering information by creating and giving presentations on customer proposals. This contains, but is not limited to, 3D representations of finished goods, 3D representations of tooling, etc.

• ·Prepares cost estimates by studying blueprints, plans, and related customer documents; consulting with engineers, and other professional and technical personnel.

• Conceptual design of composite components and assemblies to support proposals

• Generate solid and surface component and assembly CAD models

• Ability to compose detailed bill of materials for proposals

• Work as part of a team of design and engineering and ops staff

• Knowledge of ACMV and controls associate with Johnson Control Metasys will be an advantage

What we look for:

• Bachelor's Degree in Process & Instrumentation Engineering, Mechanical Engineering with minimum 3 years relevant working experience

• Possess knowledge in PLC programming. Tridium Niagara software

• Tridium Niagara certification will be added advantage,

• Transportation composite or other composite experience preferred

• Willing to learn new things

What we offer:

• Competitive salary

• Paid vacation/holidays/sick time

• Comprehensive benefits package

• On the job/cross training opportunities

• Encouraging and collaborative team environment

• Dedication to safety through our Zero Harm policy

#LI-GO1

#LI-Onsite

Who we are

Build your best future with the Johnson Controls team.

As a global leader in smart, healthy and sustainable buildings, our mission is to reimagine the performance of buildings to serve people, places and the planet. Join a winning team that enables you to build your best future! Our teams are uniquely positioned to support a multitude of industries across the globe. You will have the opportunity to develop yourself through meaningful work projects and learning opportunities. We strive to provide our employees with an experience, focused on supporting their physical, financial, and emotional wellbeing. Become a member of the Johnson Controls family and thrive in an empowering company culture where your voice and ideas will be heard – your next great opportunity is just a few clicks away!

What you will do:

The Senior Application Engineer (Data Center Project) is responsible for technical support – primarily customer quotations and business development case studies for various composite applications. Key emphasis will be on the ability to understand customer requirements and rapidly demonstrate how composite based solutions can be utilized to provide solutions with costing, timing, and resources included in the proposals. This position will require travel with the business development team to customer facilities during visits to discuss these future opportunities in depth.

How you will do it:

• Provides customer support by responding to requests for technical queries with detailed analysis of building management system, schedule of creation, tooling costing, and submittal of design and process improvements, when applicable, to meet all customer product needs.

• Works with engineering, sales, and ops staff to understand standard component fabrication techniques, standard composite materials to use, and current demands of our customers to formulate design details for the sales staff and our customers.

• ·Provides product technical engineering information by creating and giving presentations on customer proposals. This contains, but is not limited to, 3D representations of finished goods, 3D representations of tooling, etc.

• ·Prepares cost estimates by studying blueprints, plans, and related customer documents; consulting with engineers, and other professional and technical personnel.

• Conceptual design of composite components and assemblies to support proposals

• Generate solid and surface component and assembly CAD models

• Ability to compose detailed bill of materials for proposals

• Work as part of a team of design and engineering and ops staff

• Knowledge of ACMV and controls associate with Johnson Control Metasys will be an advantage

What we look for:

• Bachelor's Degree in Process & Instrumentation Engineering, Mechanical Engineering with minimum 3 years relevant working experience

• Possess knowledge in PLC programming & Tridium Niagara software

• Tridium Niagara certification would be considered an added advantage

• Transportation composite or other composite experience preferred

• Willing to learn new things

What we offer:

• Competitive salary

• Paid vacation/holidays/sick time

• Comprehensive benefits package

• On the job/cross training opportunities

• Encouraging and collaborative team environment

• Dedication to safety through our Zero Harm policy

#LI-GO1

#LI-Onsite