528 Manufacturing Engineer jobs in Singapore

Join to apply for the Manufacturing Engineer role at Ultra Clean Technology

Join to apply for the Manufacturing Engineer role at Ultra Clean Technology

Get AI-powered advice on this job and more exclusive features.

Job Summary:

Responsible to assist in supporting the production build of various systems on the manufacturing floor. Responsible for planning and conducting independent work requiring judgment in the evaluation, selection, application and adaptation of Manufacturing techniques, procedures and criteria. Devise new approaches to problems, and prepare or modify drawings, specifications, calculations, charts and graphs, and monitor work for compliance to applicable build and quality standards.

Job Summary:

Responsible to assist in supporting the production build of various systems on the manufacturing floor. Responsible for planning and conducting independent work requiring judgment in the evaluation, selection, application and adaptation of Manufacturing techniques, procedures and criteria. Devise new approaches to problems, and prepare or modify drawings, specifications, calculations, charts and graphs, and monitor work for compliance to applicable build and quality standards.

Essential Duties and Responsibilities:

• Requires a broad knowledge of Manufacturing Practices, Assembly Prints, Bill of Materials to be able to create Manufacturing ready documentation such as S.O.E.’s (Sequence of Events) and Assembly Process Workflow.
• Establish process for manufacturing and create work instruction for assembly in MES System.
• Provides technical direction and on-the-job training to production staff.
• Evaluate manufacturing process and create process control plan, PFMEA and Risk assessment.
• Must comply to POR and CE! Compliance.
• Work with Manufacturing, Engineering, Quality department to drive Continuous improvement on quality, efficiency and manufacturing cycle time.
• Initiate and support Design For Excellence and manufacturing process improvement / standardization.
• Engage with IE to optimize layout and product layout floor for new and existing plants
• Implement Lean line using DFT concept with relevant Jig and Fixture.
• Technical solve and support for trouble shooting issue, quality issue, first pass yield issue
• Participate in product transfer: Coordinate the team for training, understand the equipment, facility requirement, build and test requirements)
• Liaise and coordinate with Engineering and Material department on spec, BOM and material changes/issues
• Liaise and coordinate with Quality department on Supplier quality and Customer quality issue including RCCA, 8D preparation.
• Liaise and coordinate with Test Engineering department on testing development or testing issue
• Liaise with customer for all BOM / drawing / design issue by generating problem report / supplier problem sheet / Supplier request deviation with single page summary.
• Involve in MRB (Material Review Board) meeting, make justifiable disposition, analyst data and work with relevant departments / suppliers to reduce non-conformance.
• Minimum CAD knowledge to analyst 3D drawing from customer.
• Initiate Engineering change and waiver for any change required.
• Working in ERP System for engineering master control and change.
  
  

• Lean Manufacturing Principles, Six Sigma Greenbelt preferred.
• Familiarity with semiconductor capital equipment.
• Knowledge of electronic Work Instruction software is a plus (i.e. Sequence).
• ERP System Software
• Excellent computer skills in Microsoft Suite, emphasis in Excel.
• Prior experience leading small teams to achieve project success.
• Good Interpersonal skills; ability to work alone or in team environment.
  
  

• Bachelor’s Degree in Mechanical/Electrical/Electronics /Mechatronics/Industrial Systems Engineering.
• Diploma in Mechanical / Electrical / Electronics / Mechatronics / Industrial Systems Engineering with minimum 5 years working experience in related field can apply.
  
  

• Minimum 2 years relevant experience (5 years for diploma holder)
• Exposure to semiconductor industry preferred.
• Experience on setting up lean line will be very important
• Know and able to explore full BOM structure (more than 1,000 line) is needed.
• Self-motivated and resourceful
• Possesses drive with “can-do” attitude
• Capable of developing positive work relationship, a favourable work environment within the team and other functional group
• Must able to perform and demonstrate good workmanship understanding according to industrial standard.
• Good interpersonal, communication and presentation skill.
• Able to perform any other task assigned by manager / supervisor.
• Comply to work ethics and integrity.
• Candidate with Six Sigma Knowledge is a plus

• Seniority level Mid-Senior level

• Employment type Full-time

• Job function Engineering and Information Technology
• Industries Semiconductor Manufacturing

Referrals increase your chances of interviewing at Ultra Clean Technology by 2x

We’re unlocking community knowledge in a new way. Experts add insights directly into each article, started with the help of AI.

Job Summary:

Responsible to assist in supporting the production build of various systems on the manufacturing floor. Responsible for planning and conducting independent work requiring judgment in the evaluation, selection, application and adaptation of Manufacturing techniques, procedures and criteria. Devise new approaches to problems, and prepare or modify drawings, specifications, calculations, charts and graphs, and monitor work for compliance to applicable build and quality standards.

Essential Duties and Responsibilities:

• Requires a broad knowledge of Manufacturing Practices, Assembly Prints, Bill of Materials to be able to create Manufacturing ready documentation such as S.O.E.’s (Sequence of Events) and Assembly Process Workflow.
• Establish process for manufacturing and create work instruction for assembly in MES System.
• Provides technical direction and on-the-job training to production staff.
• Evaluate manufacturing process and create process control plan, PFMEA and Risk assessment.
• Must comply to POR and CE! Compliance.
• Work with Manufacturing, Engineering, Quality department to drive Continuous improvement on quality, efficiency and manufacturing cycle time.
• Initiate and support Design For Excellence and manufacturing process improvement / standardization.
• Engage with IE to optimize layout and product layout floor for new and existing plants
• Implement Lean line using DFT concept with relevant Jig and Fixture.
• Technical solve and support for trouble shooting issue, quality issue, first pass yield issue
• Participate in product transfer: Coordinate the team for training, understand the equipment, facility requirement, build and test requirements)
• Liaise and coordinate with Engineering and Material department on spec, BOM and material changes/issues
• Liaise and coordinate with Quality department on Supplier quality and Customer quality issue including RCCA, 8D preparation.
• Liaise and coordinate with Test Engineering department on testing development or testing issue
• Liaise with customer for all BOM / drawing / design issue by generating problem report / supplier problem sheet / Supplier request deviation with single page summary.
• Involve in MRB (Material Review Board) meeting, make justifiable disposition, analyst data and work with relevant departments / suppliers to reduce non-conformance.
• Minimum CAD knowledge to analyst 3D drawing from customer.
• Initiate Engineering change and waiver for any change required.
• Working in ERP System for engineering master control and change.

Other Duties

Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice.

Knowledge, Skills and Abilities:

• Lean Manufacturing Principles, Six Sigma Greenbelt preferred.
• Familiarity with semiconductor capital equipment.
• Knowledge of electronic Work Instruction software is a plus (i.e. Sequence).
• ERP System Software
• Excellent computer skills in Microsoft Suite, emphasis in Excel.
• Prior experience leading small teams to achieve project success.
• Good Interpersonal skills; ability to work alone or in team environment.

Educational/Certification Requirement :

• Bachelor’s Degree in Mechanical/Electrical/Electronics /Mechatronics/Industrial Systems Engineering.
• Diploma in Mechanical / Electrical / Electronics / Mechatronics / Industrial Systems Engineering with minimum 5 years working experience in related field can apply.

Experience Requirement:

• Minimum 2 years relevant experience (5 years for diploma holder)
• Exposure to semiconductor industry preferred.
• Experience on setting up lean line will be very important
• Know and able to explore full BOM structure (more than 1,000 line) is needed.
• Self-motivated and resourceful
• Possesses drive with “can-do” attitude
• Capable of developing positive work relationship, a favourable work environment within the team and other functional group
• Must able to perform and demonstrate good workmanship understanding according to industrial standard.
• Good interpersonal, communication and presentation skill.
• Able to perform any other task assigned by manager / supervisor.
• Comply to work ethics and integrity.
• Candidate with Six Sigma Knowledge is a plus

Créée en 2007, Antaes est une société suisse de conseil en management et technologie classée dans le top 15 des sociétés de conseil en Suisse. Nous comptons plus de 300 ingénieurs expérimentés qui partagent notre passion.

Présents en Suisse, à Singapour, à Hong-Kong et en France, nous accompagnons nos clients suisses, et internationaux en intervenant dans les domaines suivants :

• Conseil en organisation et transformation
• Ingénierie Industrielle
• Management des systèmes d'Information

En rejoignant nos équipes vous découvrirez :

• Une équipe dynamique dans un esprit start-up
• Un accompagnement humain et un suivi de l’évolution de votre carrière
• Des challenges pour contribuer au développement de votre réseau
• Des événements : team building, meet-up, workshop, Winter Event …

Une entreprise certifiée @HappyAtWork et ayant une politique RSE engagée (médaille d’or Ecovadis2023)

Suisse - Genève

Ingénierie Industrielle et Life-Science

Créer un macro-planning pour 200-300 projets immobiliers hospitaliers, en visualisant les étapes clés Hermès (Initialisation, Conception, Réalisation, Déploiement), via un outil comme MS Project ou Th.

• Elaborer la stratégie CQV pour un type d’installations spécifique et être responsable de la mise en œuvre du plan de validation,
• Se conformer à toutes les normes et SOPs applicables (internes et externes),
• S’assurer du respect des bonnes pratiques documentaires par les fournisseurs,
• Être support dans les phases de commissioning FAT et SAT,
• Revue de la documentation de qualification (design, protocoles QI/QO/QP et rapports, matrices de traçabilité, analyses de risques),
• Suivi de l’exécution des tests,
• Collaboration avec différentes équipes projet pour s’assurer de la bonne réalisation des activités de qualification / validation,
• Participer aux inspections des autorités.

Suisse - Genève

Ingénierie Industrielle et Life-Science

Nous recherchons un consultant Chef de Projet pour gérer l'optimisation des espaces administratifs des bâtiments hospitaliers à Genève.

Le projet vise à améliorer le confort et à optimiser les surfaces administratives sur le site hospitalier. Il s’inscrit dans une logique de regroupement des directions sur des sites stratégiques, en réponse à la croissance constante de la demande de surfaces.

Vous accompagnerez la cheffe de projet dans le pilotage global du projet. Votre rôle sera d'assurer une coordination efficace des actions, de documenter les étapes clés, de préparer les livrables attendus et de garantir la réussite du projet dans les délais et le budget impartis.

• Appui au pilotage stratégique et opérationnel du projet,
• Préparation des COPIL et rédaction des PV,
• Élaboration et suivi des outils de pilotage : Gantt, RACI, matrice des risques, budget, RIDA,
• Analyse des besoins des équipes et coordination des déménagements,
• Suivi des aménagements, équipements, désengagements,
• Participation au bilan final et à l’enquête de satisfaction.

Suisse - Genève

Ingénierie Industrielle et Life-Science

• Réaliser les études de faisabilité, conception et exécution selon cahier des charges,
• Élaborer budgets, plannings et propositions techniques,
• Gérer les lots génie chimique et mécanique (planning, suivi livrables, avancement, budgets),
• Rédiger les spécifications techniques et coordonner les échanges avec les fournisseurs,
• Superviser les chantiers, assurer la mise en route et la qualité des projets.

We are looking for a experienced Manufacturing Engineer to perform final system setup, process run, test and buyoff. The successful candidate must be able to continuously improve manufacturing process to ensure product quality and reduce manufacturing cost. Excellent technical knowledge, trouble-shooting capability, hands-on skills and teamwork are necessary.

Responsibilities

- Perform final system setup, process run, test and final buyoff

- Setup and produce manufacturing procedure and checklist to ensure consistent product quality

- Document and prepare manufacturing BOM

- Determine root cause for issues that arise during assembly and/or testing of systems

- Continuously improve manufacturing process

- Require to support field service work when needed

Requirements

- Must be hands-on, self motivated, independent and able to work under high pressure

- Good interpersonal, communications skills as well as leadership qualities are essential

- Degree / Diploma in Electronics / Electrical / Mechatronics Engineering with at least 3 years experience in machinery and automation systems manufacturing

SSMC (Systems on Silicon Manufacturing Company Pte. Ltd.), is a Joint Venture between NXP and TSMC. We offer flexible and cost effective semiconductor fabrication solutions by maintaining fully equipped SMIF cleanroom environment, 100% equipment automation and proven wafer-manufacturing processes.

At SSMC , every career journey is unique and rewarding. We're looking for innovative, passionate, and talented people like you to join our team.

We’re searching for an Engineer/ Senior Engineer to be part of our Manufacturing diverse team of talent. You will be responsible for supervising and coordinating production activities to meet daily and monthly manufacturing goals.

What you will be working on:

• Supervise and coordinate production activities to meet daily and monthly manufacturing goals through the efficient use of manpower, material, and machine; together with proficient methodologies, in a hazardous-free and healthy working environment.

• Plan, strategize and monitor the movement of WIP for maximum throughput, minimum idle time and maintain line linearity.

• Solicit Engineering support to ensure tight focus on areas and variance requiring immediate attention.

• Resolve and handle line-related issues / preventive maintenance and to understand all equipment capacities / constraints so as to identify, handle and resolve bottleneck situations.

• Mentor and train all Manufacturing Leaders and Assistants to develop skills required for efficient MFG operations.

• Execute improvement programs in manufacturing operations in his/her Section.

• Facilitate and participate in quality, productivity and cost reduction improvement.

• Ensure safety, discipline and housekeeping compliance by all personnel and take actions on violators.

• Ensure proper documentation and data-integrity.

• Perform shift duties to support production, as required by Section Manager.

More About You:

• Degree in Engineering

• 2-5 years relevant wafer fab manufacturing experience.

• Interest in Wafer Fabrication Manufacturing

• Possess leadership quality

• Good interpersonal skills

• Team player

• Good analytical and planning skills

• People management experience

SSMC is committed to equal employment opportunities and abides by the Tripartite Guidelines on Fair Employment Practices (TGFEP). All qualified applicants will receive non-discriminatory consideration for employment on the basis of merit and regardless of age, race, gender, religion, marital status and family responsibilities, or disability, or any other attributes as protected by the relevant laws.

Responsible to assist in supporting the production build of various systems on the manufacturing floor. Responsible for planning and conducting independent work requiring judgment in the evaluation, selection, application and adaptation of Manufacturing techniques, procedures and criteria. Devise new approaches to problems, and prepare or modify drawings, specifications, calculations, charts and graphs, and monitor work for compliance to applicable build and quality standards.

Essential Duties and Responsibilities:

• Requires a broad knowledge of Manufacturing Practices, Assembly Prints, Bill of Materials to be able to create Manufacturing ready documentation such as S.O.E.’s (Sequence of Events) and Assembly Process Workflow.
• Establish process for manufacturing and create work instruction for assembly in MES System.
• Provides technical direction and on-the-job training to production staff.
• Evaluate manufacturing process and create process control plan, PFMEA and Risk assessment.
• Must comply to POR and CE! Compliance.
• Work with Manufacturing, Engineering, Quality department to drive Continuous improvement on quality, efficiency and manufacturing cycle time.
• Initiate and support Design For Excellence and manufacturing process improvement / standardization.
• Engage with IE to optimize layout and product layout floor for new and existing plants
• Implement Lean line using DFT concept with relevant Jig and Fixture.
• Technical solve and support for trouble shooting issue, quality issue, first pass yield issue
• Participate in product transfer: Coordinate the team for training, understand the equipment, facility requirement, build and test requirements)
• Liaise and coordinate with Engineering and Material department on spec, BOM and material changes/issues
• Liaise and coordinate with Quality department on Supplier quality and Customer quality issue including RCCA, 8D preparation.
• Liaise and coordinate with Test Engineering department on testing development or testing issue
• Liaise with customer for all BOM / drawing / design issue by generating problem report / supplier problem sheet / Supplier request deviation with single page summary.
• Involve in MRB (Material Review Board) meeting, make justifiable disposition, analyst data and work with relevant departments / suppliers to reduce non-conformance.
• Minimum CAD knowledge to analyst 3D drawing from customer.
• Initiate Engineering change and waiver for any change required.
• Working in ERP System for engineering master control and change.

Other Duties

Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice.

Knowledge, Skills and Abilities:

• Familiarity with semiconductor capital equipment.
• Knowledge of electronic Work Instruction software is a plus (i.e. Sequence).
• ERP System Software
• Excellent computer skills in Microsoft Suite, emphasis in Excel.
• Prior experience leading small teams to achieve project success.
• Good Interpersonal skills; ability to work alone or in team environment.

Educational/Certification Requirement :

• Bachelor’s Degree in Mechanical/Electrical/Electronics /Mechatronics/Industrial Systems Engineering.
• Diploma in Mechanical / Electrical / Electronics / Mechatronics / Industrial Systems Engineering with minimum 5 years working experience in related field can apply.

Experience Requirement:

• Minimum 2 years relevant experience (5 years for diploma holder)
• Exposure to semiconductor industry preferred.
• Experience on setting up lean line will be very important
• Know and able to explore full BOM structure (more than 1,000 line) is needed.
• Self-motivated and resourceful
• Possesses drive with “can-do” attitude
• Capable of developing positive work relationship, a favourable work environment within the team and other functional group
• Must able to perform and demonstrate good workmanship understanding according to industrial standard.
• Good interpersonal, communication and presentation skill.
• Able to perform any other task assigned by manager / supervisor.
• Comply to work ethics and integrity.
• Candidate with Six Sigma Knowledge is a plus

Job Description

• Lead and supervise the team, providing technical guidance and performance management.
• Manage programs for specific products to meet customer requirements and expectations.
• Collaborate with cross-functional teams to ensure manufacturability and process reliability of components and assemblies.
• Oversee the successful realization of new product projects.
• Maintain and enhance strong customer relationships.
• Plan and execute activities to prepare the organization for production and ramp-up readiness.
• Communicate and document engineering changes for assigned products.
• Drive and communicate cost-reduction and lead-time improvement initiatives with customers.
• Perform other ad-hoc tasks/projects as assigned.

Job Requirements

• Diploma or Bachelor’s degree in Manufacturing Engineering, Mechanical Engineering, or a related field.
• Ability to work independently and as part of a team.
• Excellent work accuracy and timeliness.
• Strong analytical, problem-solving, and project management skills.
• Strong communication and collaboration abilities.
• At least 1 year of relevant work experience is required.

• Improves products, processes and components to meet agreed-upon objectives.
• May redesign products or components to meet cost objectives, component technology obsolescence and customer requirements.
• Participates actively in new product introduction, including influencing the design of the product to ensure manufacturability and conformance with the global supply chain, enabling prototyping while in the R&D lab, testing the reliability of prototypes and managing the transition into production.
• Supports and implements the transition of products and manufacturing processes from prototype to full production and through the entire life cycle of the product.
• Partners with procurement and technical services to improve/sustain products and processes.
• May direct the work of third-party vendors and/or partners to meet contract specified deliverables, performance or business objectives.
• Will identify and manage ERP data such as bill of material and routing.
• Solves a broad range of problems varying in scope and complexity
• Experience in Optics & Lasers will be an added advantage
• Knowledge of basic programming, Excel macro skills will be an added advantage.
  
  

• Bachelors or Masters Degree in Electrical & Electronic Engineering, Mechanical Engineering or equivalent.
• Able to read/write & converse Mandarin
• Typically, 4+ years relevant experience for entry to this level.
• Requires in-depth knowledge and experience in job and ability to work independently.
  
  

Company Overview:

Are you ready to see your career take flight? At GE Aerospace, we believe the world works better when it flies. We are a world-leading provider of jet engines, components, and integrated systems for commercial and military aircraft. We have a relentless dedication to the future of safe and more sustainable flight and believe in our talented people to make it happen.

Site Overview:

For more than 40 years, our advanced facilities in Singapore have led aerospace innovation across Asia Pacific. From automating processes to leveraging smart factory technologies, robotics, and additive manufacturing, GE Aerospace is shaping the future of aviation at GE Aerospace Engine Services Singapore (GEAESS).

GEAESS is our largest site for engine component Maintenance, Repair, and Overhaul (MRO), responsible for more than 60% of our global repair volume.

Role Overview:

• Design/develop/substantiate/implement new repairs.
• Ensure internal shop documents are kept current with the latest repair documents and flow changes to appropriate personnel.
• Generate, change/update OP sheets, routers.
• Track or collect data on yield and identify opportunities to improve yield; conduct new material tryouts; review process for improvements.
• Conduct salvation reviews.
• Raise and follow thru with Departure Records approval, work with REDO or GEAE engineers to enhance tech issue resolution process.
• Provide work scope for customers, draft responses to customers’ queries.
• Investigate and answer QPR/CARs.
• Where applicable, act as subject matter expert to design and develop appropriate OJT for shop CRTs.
• Engagement in lean, bullet train activities; lead cluster activities.
• Up-to-date technical/engineering documents and new business opportunities for company.
• Ensure up-to-date manuals are deployed for use – compliance.
• Proper flow down of technical operating documents for CRT use.
• Up-to-date technical/engineering documents and new business opportunities for company.
• Ensure up-to-date manuals are deployed for use – compliance.
• Proper flow down of technical operating documents for CRT use.
• Customer benefit, yield improvement and additional business for organization.
• Ensure proper technical qualifications are completed for either transitions in or out of GE Aerospace.
• Compliance/Customer Satisfaction – timely response & closure.
• Skills development & enhancement for shop CRTs.
• Support business productivity & cost efficiency drive efforts

Ideal Candidate

The Ideal candidate has experiences in the shop floor manufacturing environment as a product engineer.

Required Qualifications

• Bachelor's degree in Mechanical/Aerospace
• Related Engineering fields3 years of experience in manufacturing environment will be an advantage
• Aviation maintenance repair and/or overhaul environment preferred.

Preferred Qualifications

• Strong oral and written communication skills.
• Strong interpersonal and leadership skills.
• Ability to work independently.
• Strong problem solving skills.

At GE Aerospace, we have a relentless dedication to the future of safe and more sustainable flight and believe in our talented people to make it happen. Here, you will have the opportunity to work on really cool things with really smart and collaborative people. Together, we will mobilize a new era of growth in aerospace and defense. Where others stop, we accelerate.

Relocation Assistance Provided: No