What Jobs are available for Quality in Singapore?

Job Purpose

Lead and manage the company's QA/QC system across all EPC/EPCM projects to ensure full compliance with project specifications, client requirements, codes, and regulatory standards while fostering a strong quality culture.

Key Responsibilities

• Develop, implement, and maintain the Quality Management System (QMS) aligned with ISO standards and project requirements.
• Prepare and review Project Quality Plans, ITPs, method statements, and QA/QC procedures .
• Lead internal and external quality audits , including subcontractor and supplier assessments.
• Manage and oversee inspections and testing activities across projects.
• Lead NCR management, root cause analysis, corrective and preventive actions .
• Prepare and present quality performance reports and KPIs to management and clients.
• Conduct quality training and awareness programs for project teams.
• Liaise with clients, consultants, and regulatory bodies on all QA/QC matters.
• Drive continuous improvement initiatives to enhance quality performance.

Qualifications & Experience

• Degree in Mechanical, Electrical, Civil Engineering, or Quality Management.
• 10+ years of QA/QC experience in EPC/EPCM or construction, with 3+ years in a managerial role.
• ISO 9001 Lead Auditor certification preferred.
• Experience with BCA CONQUAS/QM implementation.

Core Competencies

• Strong leadership and team management skills.
• In-depth knowledge of QA/QC codes, standards, and processes.
• Excellent communication, report writing, and analytical skills.

Quality Assurance Quality Control Engineer
Perform checks on the structural, architectural and M&E materials/works to ensure that the final touch-up works are ready for inspections
Conduct regular inspections to ensure works are in compliance with method statements (in accordance to BCA's Good Industry Practice & approval from the clients and consultants)
Monitor the performance of subcontractor workers for all trades and ensure any defects are properly rectified
Report any non-conformance (NC) and issue corrective action request (CAR) where necessary
Implement the QA/QC management system at site
Coordinate with the client's representative on all quality and Green Mark matters
Participate in the quality internal and external audits
Root cause analysis on quality related issue and propose the preventive measure action
Liaise with NDT Company to support project team
Ensure all quality control documentation is compiled handover for final project documentation and compliance with CONQUAS
Execute quality control as per site specific materials and Works Quality Plan
Arrange and liaise with BCA for CONQUAS/QM assessments. Act as the primary quality liaison with clients and consultants, updating them on QA/QC matters and addressing quality concerns directly related to CONQUAS scoring.
Attend to client 's defects during Defect Liability Period
Work closely with site engineers and supervisors to ensure construction methods comply with CONQUAS specifications, providing guidance on quality protocols and rectifications or even conducting relevant training as needed
Achieve GM Platinum SLE (Super Low Energy) and PE (Positive Energy) certifications
Oversee the collection of all necessary Green Mark documents throughout the project lifecycle
Conduct regular site inspections to ensure adherence to green building practices
Provide technical guidance and leadership on Green Mark strategies and solutions
Collaborate with stakeholders to ensure project goals align with sustainability targets
Requirements
Bachelor's degree in civil engineering, construction management, or related field
Certified GMAP / GMAAP preferred
Candidates who possess 3-7 years experience in a QA/QC role within the building main contractor firm, with added experience in managing Quality Marks assessment processes or certifications a significant advantage
Good knowledge of construction quality control/assurance is necessary
Certifications: BCA-Approved CONQUAS training or relevant quality certification such as ISO 9001:2015 in Quality Management Systems
Familiar in conducting quality audits and surveillances; and proficient in the concepts of construction productivity, sustainability and QAQC
Proven experience in managing Green Mark projects from initiation to completion
Serve as the sole point of contact for all Green Mark-related matters with C&S Archi and M&E
Information provided in response to this job advertisement will be treated in strict confidence and be used for recruitment purpose only.
Seniority level
Associate
Employment type
Full-time
Job function
Engineering and Quality Assurance
Industries
Construction
#J-18808-Ljbffr

Requirements:
Recognized Degree in related field
Experience in working with Contractors
Relevant experience in Civil/ Building, preferably with experience in facade installation works
Good team player and adaptable to dynamic environment
Responsibilities:
Responsible for effective implementation of overall project quality management system (QMS).
Preparation of relevant reports for recommendation and continuously improvements for the project.
Responsible for managing team of QA/QC engineers.
Preparation and compilation of Inspection and Test Plan (ITP), Project Quality Plan (PQP) and Operation Maintenance and Manual (OMM).
Ensure the requirements of Project Quality Plan/Manual is implemented and adhered to the assigned project.
Liaise with Clients' and Sub-Contractors' Quality representatives.
Participate in audits by Clients' team of the Company's systems implemented on assigned Projects.
Investigate and document and resolve any Clients' complaints about Quality.
Make recommendations to Project team regarding improvements on Quality.
Assist Project and QA/QC Team in inspection and testing as necessary.
Liaise with Independent Inspection and Testing Agency in respect of factory and Site inspections in line with Project Specification requirements.
Maintaining, improving and implementing Project Quality system and Quality plans in conjunction with the project team.
Investigation of Quality deficiencies and implementation of corrective action as well as recommendation for preventive actions.
Identify and document Quality problems, seek solutions and verify the implementation of solutions.
Any other duties as directed by Managing Director
Checking that all non-conforming materials, components and equipment are promptly identified and segregated pending their final disposition.
Liaise with RE/RTO and all other parties in respect of inspection and handing over of installed steel and facade elements.
Perform inspection and check for all quality related procedures.
Coordinate with the managers and supervisors of the projects.
Responsible for closure of Non-conformance reports and Site Instruction.
#J-18808-Ljbffr

Job Purpose
Lead and manage the company's QA/QC system across all EPC/EPCM projects to ensure full compliance with project specifications, client requirements, codes, and regulatory standards while fostering a strong quality culture.
Key Responsibilities
Develop, implement, and maintain the
Quality Management System (QMS)
aligned with ISO standards and project requirements.
Prepare and review
Project Quality Plans, ITPs, method statements, and QA/QC procedures .
Lead
internal and external quality audits , including subcontractor and supplier assessments.
Manage and oversee inspections and testing activities across projects.
Lead
NCR management, root cause analysis, corrective and preventive actions .
Prepare and present
quality performance reports and KPIs
to management and clients.
Conduct quality training and awareness programs for project teams.
Liaise with clients, consultants, and regulatory bodies on all QA/QC matters.
Drive continuous improvement initiatives to enhance quality performance.
Qualifications & Experience
Degree in Mechanical, Electrical, Civil Engineering, or Quality Management.
10+ years of QA/QC experience in EPC/EPCM or construction, with 3+ years in a managerial role.
ISO 9001 Lead Auditor certification preferred.
Experience with BCA CONQUAS/QM implementation.
Core Competencies
Strong leadership and team management skills.
In-depth knowledge of QA/QC codes, standards, and processes.
Excellent communication, report writing, and analytical skills.
#J-18808-Ljbffr

Job Description & Requirements
Review the inspection history to summarize the integrity status of the plant equipment and piping systems.
Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.
Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan.
Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).
Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.
Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.
Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.
Provide recommendations and timely updates on equipment degradation problems.
Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.
Preparation of final inspection reports with all findings, abnormalities and recommendations.
Ensure quality of inspected items to meet project requirements and standards.
Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.
Read, understand project related ITP, procedures, specification requirements.
Review documents and drawings as per specification – Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.
Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication.
Knowledge in welding inspection.
Eligibility Criteria
Graduate Engineers with 3-6 years of relevant experience.
Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.
Experience in Refinery and Oil & Gas must.
Experience in QA/QC and Knowledge in Non-Destructive Testing methods.
Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.
Work Independently and can work in Singapore and other countries.
Fluent Reading, Speaking and Writing in English.
Willing to commit 24 months contract/ project completion.
Team Worker, Mature, Meticulous, Pro‐Active Work Attitude & Work Independent.
Energetic & Result Orientated.
#J-18808-Ljbffr

Job Description & Requirements

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

· Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated

Job Description & Requirements

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

· Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated

Job Description & Requirements

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

· Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated

Job Description & Requirements

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

· Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated