1,255 Process Engineer jobs in Singapore

JOB SCOPE & JOB RESPONSIBILITIES

• Familiar with RO, demin, mixed bed, ultra-pure, neutralization, chemical preciptation (including HF, heavy metal, backgrind etc.), biological treatment etc. and specialty processes.
• Develop process design packages: heat & mass balances; PFDs; P&ids; process calculations.
• Perform equipment sizing and prepare specification (pumps, blowers, air compressors, vessels, tanks) and materials selection; define instrumentation and control philosophy with cause-and-effect matrices.
• Liaise with OEMs/vendors to validate technologies and recommend best-fit solutions based on performance, compliance, schedule, and total cost of ownership (CAPEX+OPEX); drive technical clarifications and value engineering.
• Prepare and review equipment lists, line lists, valve list and load lists as required.
• Prepare and check process datasheets for RFQs; evaluate vendor proposals for compliance with technical specs, codes, and regulations; lead technical clarifications.
• Prepare technical proposal according to client's RFQs. Provide solution to clarifications and prepare cost estimation.
• Plan and participate in HAZOP and related reviews, coordinate action close-out.
• Produce/peer-review submission documentation; support project FAT/SAT, plant start-up, performance testing, process optimization, and handover.
• Compile/author ITP/IP and IOM manuals; interface with multidisciplinary teams (C&S, MEICA, controls) and construction/site teams.

JOB REQUIREMENTS

• Degree in Chemical or Environmental Engineering (or equivalent)
• Standards & codes: Familiar with relevant international standards/codes and onshore/offshore practices
• Proficiency with MS Office
• Working knowledge of AFT Fathom (hydraulic analysis) and AutoCAD Plant 3D (P&ID) is an advantage

WORK EXPERIENCES

• Process Engineer: More than 2 years in a similar scope, preferably in Oil & Gas, Power, or Water/Wastewater
• Senior Process Engineer: More than 5 years with demonstrated leadership in design reviews, HAZOP facilitation/close-out, vendor management and mentoring junior engineers.

JOB SCOPE & JOB RESPONSIBILITIES

• Familiar with RO, demin, mixed bed, ultra-pure, neutralization, chemical preciptation (including HF, heavy metal, backgrind etc.), biological treatment etc. and specialty processes.
• Develop process design packages: heat & mass balances; PFDs; P&IDs process calculations.
• Perform equipment sizing and prepare specification (pumps, blowers, air compressors, vessels, tanks) and materials selection; define instrumentation and control philosophy with cause-and-effect matrices.
• Liaise with OEMs/vendors to validate technologies and recommend best-fit solutions based on performance, compliance, schedule, and total cost of ownership (CAPEX+OPEX); drive technical clarifications and value engineering.
• Prepare and review equipment lists, line lists, valve list and load lists as required.
• Prepare and check process datasheets for RFQs; evaluate vendor proposals for compliance with technical specs, codes, and regulations; lead technical clarifications.
• Prepare technical proposal according to client's RFQs. Provide solution to clarifications and prepare cost estimation.
• Plan and participate in HAZOP and related reviews, coordinate action close-out.
• Produce/peer-review submission documentation; support project FAT/SAT, plant start-up, performance testing, process optimization, and handover.
• Compile/author ITP/IP and IOM manuals; interface with multidisciplinary teams (C&S, MEICA, controls) and construction/site teams.

JOB REQUIREMENTS

• Degree in Chemical or Environmental Engineering (or equivalent)
• Standards & codes: Familiar with relevant international standards/codes and onshore/offshore practices
• Proficiency with MS Office
• Working knowledge of AFT Fathom (hydraulic analysis) and AutoCAD Plant 3D (P&ID) is an advantage

WORK EXPERIENCES

• Process Engineer: More than 2 years in a similar scope, preferably in Oil & Gas, Power, or Water/Wastewater
• Senior Process Engineer: More than 5 years with demonstrated leadership in design reviews, HAZOP facilitation/close-out, vendor management and mentoring junior engineers.

JOB SCOPE & JOB RESPONSIBILITIES

• Familiar with RO, demin, mixed bed, ultra-pure, neutralization, chemical preciptation (including HF, heavy metal, backgrind etc.), biological treatment etc. and specialty processes.
• Develop process design packages: heat & mass balances; PFDs; P&IDs; process calculations.
• Perform equipment sizing and prepare specification (pumps, blowers, air compressors, vessels, tanks) and materials selection; define instrumentation and control philosophy with cause-and-effect matrices.
• Liaise with OEMs/vendors to validate technologies and recommend best-fit solutions based on performance, compliance, schedule, and total cost of ownership (CAPEX+OPEX); drive technical clarifications and value engineering.
• Prepare and review equipment lists, line lists, valve list and load lists as required.
• Prepare and check process datasheets for RFQs; evaluate vendor proposals for compliance with technical specs, codes, and regulations; lead technical clarifications.
• Prepare technical proposal according to client's RFQs. Provide solution to clarifications and prepare cost estimation.
• Plan and participate in HAZOP and related reviews, coordinate action close-out.
• Produce/peer-review submission documentation; support project FAT/SAT, plant start-up, performance testing, process optimization, and handover.
• Compile/author ITP/IP and IOM manuals; interface with multidisciplinary teams (C&S, MEICA, controls) and construction/site teams.

JOB REQUIREMENTS

• Degree in Chemical or Environmental Engineering (or equivalent)
• Standards & codes: Familiar with relevant international standards/codes and onshore/offshore practices
• Proficiency with MS Office
• Working knowledge of AFT Fathom (hydraulic analysis) and AutoCAD Plant 3D (P&ID) is an advantage

WORK EXPERIENCES

• Process Engineer: More than 2 years in a similar scope, preferably in Oil & Gas, Power, or Water/Wastewater
• Senior Process Engineer: More than 5 years with demonstrated leadership in design reviews, HAZOP facilitation/close-out, vendor management and mentoring junior engineers.

JOB SCOPE & JOB RESPONSIBILITIES
Familiar with RO, demin, mixed bed, ultra-pure, neutralization, chemical precipitation (including HF, heavy metal, backgrind etc.), biological treatment etc. and specialty processes.
Develop process design packages: heat & mass balances; PFDs; P&IDs; process calculations.
Perform equipment sizing and prepare specification (pumps, blowers, air compressors, vessels, tanks) and materials selection; define instrumentation and control philosophy with cause-and-effect matrices.
Liaise with OEMs/vendors to validate technologies and recommend best-fit solutions based on performance, compliance, schedule, and total cost of ownership (CAPEX+OPEX); drive technical clarifications and value engineering.
Prepare and review equipment lists, line lists, valve list and load lists as required.
Prepare and check process datasheets for RFQs; evaluate vendor proposals for compliance with technical specs, codes, and regulations; lead technical clarifications.
Prepare technical proposal according to client's RFQs. Provide solution to clarifications and prepare cost estimation.
Plan and participate in HAZOP and related reviews, coordinate action close-out.
Produce/peer-review submission documentation; support project FAT/SAT, plant start-up, performance testing, process optimization, and handover.
Compile/author ITP/IP and IOM manuals; interface with multidisciplinary teams (C&S, MEICA, controls) and construction/site teams.
JOB REQUIREMENTS
Degree in Chemical or Environmental Engineering (or equivalent)
Standards & codes: Familiar with relevant international standards/code and onshore/offshore practices
Proficiency with MS Office
Working knowledge of AFT Fathom (hydraulic analysis) and AutoCAD Plant 3D (P&ID) is an advantage
WORK EXPERIENCES
Process Engineer: More than 2 years in a similar scope, preferably in Oil & Gas, Power, or Water/Wastewater
Senior Process Engineer: More than 5 years with demonstrated leadership in design reviews, HAZOP facilitation/close-out, vendor management and mentoring junior engineers.
#J-18808-Ljbffr

JOB SCOPE & JOB RESPONSIBILITIES

• Familiar with RO, demin, mixed bed, ultra-pure, neutralization, chemical preciptation (including HF, heavy metal, backgrind etc.), biological treatment etc. and specialty processes.
• Develop process design packages: heat & mass balances; PFDs; P&IDs; process calculations.
• Perform equipment sizing and prepare specification (pumps, blowers, air compressors, vessels, tanks) and materials selection; define instrumentation and control philosophy with cause-and-effect matrices.
• Liaise with OEMs/vendors to validate technologies and recommend best-fit solutions based on performance, compliance, schedule, and total cost of ownership (CAPEX+OPEX); drive technical clarifications and value engineering.
• Prepare and review equipment lists, line lists, valve list and load lists as required.
• Prepare and check process datasheets for RFQs; evaluate vendor proposals for compliance with technical specs, codes, and regulations; lead technical clarifications.
• Prepare technical proposal according to client's RFQs. Provide solution to clarifications and prepare cost estimation.
• Plan and participate in HAZOP and related reviews, coordinate action close-out.
• Produce/peer-review submission documentation; support project FAT/SAT, plant start-up, performance testing, process optimization, and handover.
• Compile/author ITP/IP and IOM manuals; interface with multidisciplinary teams (C&S, MEICA, controls) and construction/site teams.

JOB REQUIREMENTS

• Degree in Chemical or Environmental Engineering (or equivalent)
• Standards & codes: Familiar with relevant international standards/codes and onshore/offshore practices
• Proficiency with MS Office
• Working knowledge of AFT Fathom (hydraulic analysis) and AutoCAD Plant 3D (P&ID) is an advantage

WORK EXPERIENCES

• Process Engineer: More than 2 years in a similar scope, preferably in Oil & Gas, Power, or Water/Wastewater
• Senior Process Engineer: More than 5 years with demonstrated leadership in design reviews, HAZOP facilitation/close-out, vendor management and mentoring junior engineers.

Looking to grow your career in manufacturing engineering? Join a leading semicon company in Woodlands where you'll work in a cleanroom environment, support engineers with hands-on operations, and gain exposure to PLM, SAP, and 2D/3D CAD systems.

Job Info:

• Basic salary up to $4,000 + AWS + Variable Bonus
• Monday to Friday, office hours
• Location: Woodlands (company transport provided from Admiralty MRT)
• Cleanroom environment – safe, structured, and professional workplace
• Urgent hiring: Immediate starters or candidates with short notice preferred

Job Scope:

• Support Manufacturing Engineers in operation prep using PLM and SAP
• Develop and document manufacturing procedures, build sequences, and quality documentation
• Validate draft procedures on-site and update revisions with production teams
• Create and maintain OMS Pro documentation (assembly processes, electrical installations, cable routing)
• Develop and update Test Work Instructions in coordination with Test Engineers
• Assist in jig/fixture design (2D/3D CAD), support cross-functional teams, and drive process improvements

Job Requirements:

• Diploma/Degree in Mechanical/Mechatronics/Electrical/Control Engineering; manufacturing experience preferred.
• Proficient in AutoCAD, 2D & 3D modeling (e.g., PTC Creo), SAP PLM/ERP, and advanced Excel (VLOOKUP/scripting).
• Ability to interpret 2D/3D designs, GD&T, electrical/pneumatic schematics, and draft procedures/checklists.
• Knowledge of Lean, FMEA, 8D; cleanroom protocol adherence is a plus.

Please submit your updated resume by using the APPLY NOW BUTTON

By submitting your personal data and/or resume to us in connection with your job application, you will be deemed to have agreed and consented to us in collecting, using, retaining, and disclosing your personal data and/or resume to prospective employers for the purpose of the evaluating, processing and administration by company relating to this job application.

We regret to inform that only shortlisted candidates would be notified

We wish you all the best in your career search.

You are welcome to visit our website at

RK Recruitment Pte Ltd | EA License No.: 20C0280

Ian Gan Zhi Shen | EA Personnel No.: R

Our company is seeking an experienced Bill of Materials (BOM) Engineer to join our team. The successful candidate will be responsible for creating, revising and managing multi-level BOMs to support engineering change orders (ECOs) and production workflows.

• Create, revise and manage multi-level Bill of Materials (BOM) to support engineering change orders (ECOs) and production workflows.
• Configure and maintain master data in enterprise systems such as SAP and Shop Floor Control (SFC) for accurate routing, material and process control.
• Collaborate with design and packaging engineering teams to optimize rack-level packaging for manufacturability and assembly efficiency.
• Lead cross-functional implementation of BOM and material change activities ensuring alignment with global engineering procurement and production teams.
• Provide on-site engineering support during high-volume production to troubleshoot process deviations and drive root cause analysis.
• Lead and participate in Lean manufacturing and Kaizen initiatives to improve process yield efficiency and cycle time.
• Execute New Product Introduction (NPI) qualifications including process validation line readiness and production ramp-up support.
• Support audit readiness and compliance by maintaining documentation and participating in ISO 9001/14001 audit activities.

To succeed in this role, you will need the following skills and qualifications:

• Possess a recognized Degree or Diploma in Engineering with preference given to candidates specializing in Mechanical Electrical or Manufacturing disciplines.
• A minimum of three (3) years of relevant experience within a manufacturing environment.
• Excellent communication and interpersonal skills with the proven ability to collaborate effectively across diverse stakeholder groups including customers headquarters factory teams colleagues and management.
• Strong analytical and problem-solving abilities coupled with a proactive and hands-on approach to technical challenges.
• Demonstrated capability to manage tasks and projects independently exercising sound judgment and minimal supervision.
• Meticulous attention to detail with a strong commitment to process compliance and operational excellence.

Overview

We are seeking a highly skilled and detail-oriented Manufacturing Engineer to join our team in the precision engineering sector. The Manufacturing Engineer will be responsible for developing, implementing, and improving manufacturing processes to achieve the highest standards of quality and efficiency. This role requires a deep understanding of engineering principles, advanced manufacturing techniques, and a strong commitment to innovation and continuous improvement.

Duties and Responsibilities

Process Development and Implementation

• Design and develop manufacturing processes for new products and optimize existing processes to improve quality and efficiency.
• Conduct feasibility studies and cost analyses for manufacturing projects.
• Collaborate with design, production, and quality teams to ensure seamless integration of new processes.
• Create detailed process documentation, including work instructions, process flow diagrams, and standard operating procedures.
• Transfer process knowledge to production teams.

Continuous Improvement

• Identify opportunities for process improvements and implement lean manufacturing principles to reduce waste and increase productivity.
• Analyze production data to identify trends and areas for improvement.
• Lead cross-functional teams in problem-solving and root cause analysis activities.
• Develop and implement corrective and preventive actions to address process deficiencies.

Quality Assurance

• Ensure that all manufacturing processes comply with industry standards and regulatory requirements.
• Work closely with the quality team to develop and implement quality control plans.
• Participate in internal and external audits and address any findings related to manufacturing processes.

Technical Support

• Provide technical support to production teams to resolve manufacturing issues and improve process performance.
• Train and mentor production staff on new processes and best practices.
• Collaborate with equipment vendors and suppliers to identify and implement new technologies and equipment.
• Maintain up-to-date knowledge of industry trends, technologies, and best practices.

Position Requirements

• Education Requirements: Bachelor's Degree in Manufacturing Engineering, Mechanical Engineering, or related field.
• Experience Level Requirements: Minimum of 5 years of experience in manufacturing engineering, preferably in the precision machining engineering sector.

Skills Desired:

• Strong knowledge of manufacturing processes, materials, and equipment used in precision machining engineering.
• Experience with CAD/CAM software, ideally SolidWorks, MasterCam and other engineering tools.
• Knowledge of technical drawings and BOM.
• Proven ability to lead process improvement initiatives and implement lean manufacturing principles.
• Excellent problem-solving skills and attention to detail.
• Strong communication and interpersonal skills, with the ability to work effectively in cross-functional teams.
• Able to work under pressure with minimum supervision
• Knowledge of industry standards and regulatory requirements applicable to precision machining engineering.

Responsibilities:

• Responsible for Continuous improvement activities and projects to improve efficiency, quality and cost
• Provide concept for Fixture/Jigs design implemented into production in reducing routing time
• Develop and maintain manufacturing processes, tools and shop floor tracking
• In charge of production by complying with quality requirement and meeting production schedule

Requirements:

• Minimum Degree in Mechanical Engineering or its equivalent
• At least 3 years related work experience in manufacturing industry
• Experience in SAP, MATLAB and Statistics Process Control is an added advantage
• Good interpersonal and communication skills

Interested candidates who wish to apply for the advertised position, please click on the APPLY button below to send in your resume or send to

EA License No: 13C6305

Reg. No.: R (CHEN JING WEI)

For candidate who applied for the advertised position is deemed to have consented to us that we may collect, use or disclose your personal information for purpose in connection with the services provided by us.