714 Rotating Equipment jobs in Singapore

A key subject matter expert in the Engineering and Asset Strategy Division, you will be responsible for providing expert technical support, troubleshooting, and strategic guidance for all rotating machinery within the power generation facility. This includes Siemens V94.3A and GE 9HA.01 gas turbines, generators, compressors, pumps, fans, and other balance of plant (BOP) rotating assets. You will ensure optimal performance, reliability, and availability of equipment through proactive maintenance strategies, root cause analysis, and continuous improvement initiatives.
RESPONSIBILITIES
Serve as the technical authority for all rotating equipment, especially Siemens V94.3A and GE 9HA.01 gas turbines.
Conduct and interpret vibration analysis, thermography and other condition monitoring techniques.
Lead Root Cause Analysis (RCA) and corrective action planning for rotating equipment issues.
Provide engineering support for troubleshooting, failure analysis, and performance optimization.
Review and recommend maintenance procedures, work scopes, and inspection plans.
Review and assist maintenance department on predictive and preventive maintenance strategies.
Lead reliability improvement initiatives using tools like RCA, failure mode and effect analysis (FMEA), and reliability centered maintenance (RCM).
Support planning and execution of major overhauls and outages.
Coordinate with OEMs and contractors for inspections, repairs, and upgrades.
Review and validate scope of work, spare parts, and tooling requirements.
Maintain accurate records of equipment history, modifications, and performance data.
Ensure compliance with industry standards, OEM guidelines, and regulatory requirements.
Contribute technical reports, risk assessments, and audit responses.
Mentor junior engineers and technicians on rotating equipment best practices.
Conduct training sessions on equipment operation, maintenance, and diagnostics.
Stay updated with latest technologies and industry trends.
Oversee operations & maintenance (O&M) budget and manage budgets for engineering improvement projects and asset management initiatives.
QUALIFICATIONS & EXPERIENCE
Bachelor's degree in Mechanical Engineering or related field.
Minimum 8 to 10 years of experience in rotating equipment engineering in Power Generation or Petrochemical industry.
Familiarity with relevant API codes such as:
API 610 (Centrifugal Pumps for Petroleum, Petrochemical and Natural Gas Industries)
API 617 (Axial and Centrifugal Compressors and Expander-compressors)
API 618 (Reciprocating Compressors)
API 670 (Machinery Protection Systems)
In-depth knowledge of Siemens V94.3A and GE 9HA.01 gas turbines is an advantage.
Proficient in vibration analysis, thermography, and condition monitoring tools.
Familiarity with CMMS systems and engineering software (e.g., SAP, Maximo, ANSYS).
Strong analytical, communication, and leadership skills.
Safety mindset and commitment to good workplace safety behavior.
PREFERRED CERTIFICATIONS
Knowledge and application of API standards including API 610, API 617, API 618, and API 670.
API, ASME, or ISO certifications related to rotating equipment.
Certified Vibration Analyst (e.g., Mobius, BINDT).
GE and Siemens OEM training certifications are an advantage.
#J-18808-Ljbffr

Job Description
We are seeking an experienced
QA/QC Engineer (Mechanical – Rotating Equipment)
to participate in the procurement and manufacturing process of rotating equipment such as compressors, pumps, emergency diesel generators, etc. The role covers the entire lifecycle from RFQ to shipment, including quality inspections, vendor liaison, audits, and resolution of non-conformances to ensure compliance with project and company requirements.
Responsibilities
Gain familiarity with company quality requirements and ensure they are implemented in projects.
Participate in meetings with vendors and company representatives to align on quality requirements.
Attend Kick-Off Meetings (KOM) and prepare quality-related presentation materials.
Review and comment on vendor documents (ITP, MPS, FAT procedures, reports, etc.).
Communicate with vendors/clients regarding feedback or comments; arrange clarification meetings if required.
Ensure Pre-Inspection Meetings (PIM) are scheduled and conducted; host PIM meetings when required.
Verify Notice of Inspection (NOI) readiness and liaise with TPC coordinator for vendor inspections.
Review and comment on TPC inspection reports.
Raise and manage Non-Conformance Reports (NCRs), ensuring vendor responses and root cause analysis (RCA) are completed within agreed timelines.
Review manufacturer’s record books and as-built dossiers to ensure accuracy and completeness.
Requirements
Bachelor’s Degree or higher in Engineering
(Mechanical or related discipline).
Minimum
8 years of relevant QA/QC experience
in manufacturing, inspection, or execution of rotating equipment.
Strong knowledge of ISO-9001 quality system requirements and implementation.
Demonstrated working knowledge of applicable codes such as
API 610 / 617 / 618 / 619 / 676 .
Preferably certified in
CSWIP 3.1, AWS-CWI, or IWE , with NDT qualifications an advantage.
Proficiency in English (written and spoken), with strong communication and coordination skills.
Proficient in Microsoft Office and related software tools.
Strong problem-solving, teamwork, and organizational skills.
Ability to work under pressure and meet tight deadlines.
#J-18808-Ljbffr

We are seeking an experienced QA/QC Engineer (Mechanical – Rotating Equipment) to participate in the procurement and manufacturing process of rotating equipment such as compressors, pumps, emergency diesel generators, etc. The role covers the entire lifecycle from RFQ to shipment, including quality inspections, vendor liaison, audits, and resolution of non-conformances to ensure compliance with project and company requirements.

• Gain familiarity with company quality requirements and ensure they are implemented in projects.
• Participate in meetings with vendors and company representatives to align on quality requirements.
• Attend Kick-Off Meetings (KOM) and prepare quality-related presentation materials.
• Review and comment on vendor documents (ITP, MPS, FAT procedures, reports, etc.).
• Communicate with vendors/clients regarding feedback or comments; arrange clarification meetings if required.
• Ensure Pre-Inspection Meetings (PIM) are scheduled and conducted; host PIM meetings when required.
• Verify Notice of Inspection (NOI) readiness and liaise with TPC coordinator for vendor inspections.
• Review and comment on TPC inspection reports.
• Raise and manage Non-Conformance Reports (NCRs), ensuring vendor responses and root cause analysis (RCA) are completed within agreed timelines.
• Review manufacturer’s record books and as-built dossiers to ensure accuracy and completeness.

• Bachelor’s Degree or higher in Engineering (Mechanical or related discipline).
• Minimum 8 years of relevant QA/QC experience in manufacturing, inspection, or execution of rotating equipment.
• Strong knowledge of ISO-9001 quality system requirements and implementation.
• Demonstrated working knowledge of applicable codes such as API 610 / 617 / 618 / 619 / 676 .
• Preferably certified in CSWIP 3.1, AWS-CWI, or IWE , with NDT qualifications an advantage.
• Proficiency in English (written and spoken), with strong communication and coordination skills.
• Proficient in Microsoft Office and related software tools.
• Strong problem-solving, teamwork, and organizational skills.
• Ability to work under pressure and meet tight deadlines.

We are seeking an experienced QA/QC Engineer – Mechanical (Rotating Equipment) to support quality assurance and control activities throughout the procurement and manufacturing process of rotating equipment such as compressors, pumps, and emergency diesel generators.
The role covers all project stages from RFQ to shipment, including technical bid evaluation, purchase order review, manufacturing inspection, FAT, and final inspection to ensure compliance with project and client requirements.

• Ensure full understanding and implementation of the company’s quality requirements.
• Participate in meetings with vendors and clients to communicate quality expectations and resolve issues.
• Attend Kick-Off Meetings (KOM) and prepare quality-related materials and presentations.
• Review and comment on vendor documentation including ITPs, MPS, FAT procedures, and inspection reports.
• Coordinate and host Pre-Inspection Meetings (PIM) to align inspection and testing requirements.
• Verify Notification of Inspection (NOI) readiness and coordinate vendor inspections with the Third-Party Coordinator (TPC).
• Review TPC inspection reports and ensure timely resolution of non-conformities.
• Issue Non-Conformance Reports (NCR) and expedite vendor corrective action / root cause analysis within defined timelines.
• Review and approve manufacturers’ record books and as-built dossiers for completeness and compliance.

• Bachelor’s Degree in Mechanical Engineering or equivalent discipline.
• Minimum 8 years of experience in QA/QC, inspection, or manufacturing of rotating equipment (compressors, pumps, generators, etc.).
• Strong knowledge of ISO 9001 quality system requirements and practical implementation.
• Familiarity with API 610 / 617 / 618 / 619 / 676 and other applicable industry codes and standards.
• Preferably certified in CSWIP 3.1 / AWS-CWI / IWE and with valid NDT qualifications .
• Proficient in English (written and spoken) and skilled in standard office software.
• Strong analytical and problem-solving skills, able to work independently and under pressure.
• Team player with excellent communication and interpersonal skills.

Brunel International S.E.A Pte. Ltd.
UEN No: R
EA License No: 16S8067
Shahidan Yusof - R

We are seeking an experienced Rotating Equipment Quality Assurance expert to support quality assurance and control activities throughout the procurement and manufacturing process of rotating equipment such as compressors, pumps, and emergency diesel generators.

The role covers all project stages from RFQ to shipment, including technical bid evaluation, purchase order review, manufacturing inspection, FAT, and final inspection to ensure compliance with project requirements.

• Ensure full understanding and implementation of the company's quality requirements.
• Participate in meetings with vendors and clients to communicate quality expectations and resolve issues.
• Attend Kick-Off Meetings (KOM) and prepare quality-related materials and presentations.
• Review and comment on vendor documentation including ITPs, MPS, FAT procedures, and inspection reports.
• Coordinate and host Pre-Inspection Meetings (PIM) to align inspection and testing requirements.
• Verify Notification of Inspection (NOI) readiness and coordinate vendor inspections with the Third-Party Coordinator (TPC).
• Review TPC inspection reports and ensure timely resolution of non-conformities.
• Issue Non-Conformance Reports (NCR) and expedite vendor corrective action / root cause analysis within defined timelines.

• Bachelor's Degree in Mechanical Engineering or equivalent discipline.
• Minimum 8 years of experience in QA/QC, inspection, or manufacturing of rotating equipment (compressors, pumps, generators, etc.).
• Strong knowledge of ISO 9001 quality system requirements and practical implementation.
• Familiarity with API 610 / 617 / 618 / 619 / 676 and other applicable industry codes and standards.
• Preferably certified in CSWIP 3.1 / AWS-CWI / IWE and with valid NDT qualifications.
• Proficient in English (written and spoken) and skilled in standard office software.
• Strong analytical and problem-solving skills, able to work independently and under pressure.
• Team player with excellent communication and interpersonal skills.

Your role

Our major Oil & Energy Downstream Client is urgently looking for Construction Engineer (Rotating Equipment) who will be responsible for rotating equipment (RE) related activities planning i.e., developing efficient work plans (work packages, tasks, sequences, materials, craft/ manpower and resources). You will collect RE scopes from various disciplines. Evaluate the work scopes, perform scope optimization, and identify the scope of work that can be executed. Work closely with various disciplines to finalize the work scopes.

You will provide cost estimation for all RE work scopes & work closely with Cost Engineer on RE budget management. Provide cost saving initiatives for cost optimization. You will prepare Work Packages for all RE scopes which include but not limited to Equipment drawings, P & IDs, GA Drawings, BOM, ITPs, detailed planning etc. You will liaise with OEM specialist on site support arrangement & spare parts purchase for work scope.

• Work closely with various disciplines such as Mechanical, Electrical & Instrumentation for safe and successful execution. Perform site checks with various execution parties such as discipline engineers & contractors and ensure everyone understand the work scopes thoroughly and well prepared for safe and smooth Execution
• Work closely with Rotating Equipment Engineer (REE) during construction phase and ensure all the Hold Points are verified & witnessed as per Inspection & Test Plan (ITP) for Flawless Execution
• Work closely with Electrical/ Instrumentation/ Inspection Engineer on Equipment inspection, calibration & testing requirements and ensure values are verified and witnessed by REE/Respective Engineers/OEM etc.
• Oversee field construction activity of contractor. Hands on support when required
• Support Pre-Startup Safety Review (PSSR) during plant start up and work closely with REE and respective Engineers to troubleshoot any plant start up issues
• Carry out post start-up activities like preparation of spares for handover, verification of final work packages and as-built documents
• Leads and execute construction activities achieve sustainable, top quartile (TQ) delivery in HSSE, quality, cost, and schedule
• Collaborate with others (including EPCs/EPCMs) for planning and scheduling
• Ensures all construction activities comply with regulatory and company HSSE standards and requirements
• Demonstrate and role model positive Leadership attributes; personal integrity and authenticity, inspire & aspire, collaborative, commercial mindset and deliver extraordinary business outcomes
• Contribute to Project development and execution through active participation in required studies (E.g., Risk identification and Management, HAZOP, 3D design reviews, Constructability studies, contracting strategy workshops) and providing construction input early in the project phases
• Identifies and manages interfaces through regular engagement with stakeholders, including external entities. (E.g., Government regulatory agencies). Manage differing priorities from them to deliver the best possible outcomes for the site
• Jointly develop execution plans (including HSSE & quality) in partnership with internal stakeholders (E.g., Projects, Turnaround, Operations, Maintenance). Identifies and manages risk from simultaneous operations or activities. Proposes practical alternatives to stakeholders for consideration. Implements mitigation plansPerform the role of Authorized Engineer in Aster’s permit to work system. (Training provided) Verifies scope, work method statement and risk assessment are adequate for the planned work
• Construction scope of mainly brownfield, revamp nature, frequently in Turnaround Events. Requires good understanding and appreciation of associated risks, constraints, and levers to drive and deliver the desired outcome
• Multiple stakeholders to engage and manage, especially in an existing manufacturing plant environment with SIMOPS considerations. (E.g., Live plant, Turnaround environments)
• Prioritize field execution sequence and resources when conflict arises. Manage available resources well, optimally and demonstrate a high level of resourcefulness. Evaluate work processes, anticipate potential problems, alter plans as needed to achieve effective implementation and drive results.
• Where required to complete the planned works, work extended hour, and weekend works (Including during Turnarounds or construction period)
• A committed team player able to work on own initiative with minimum supervision
• Carry out any other related duties as required, including temporary assignments in other sections within the department on site

You are what we are looking for if you:

• Have minimum Diploma/Degree in Engineering
• Have experience in oil and gas downstream, refinery, chemical, and/or petrochemical industry
• Have minimum 5 years of professional experience in onshore project construction (Erection of equipment) or maintenance of rotating equipment. RE equipment including but not limited to Pumps, compressors, mixers, fin fans. Hands on experience required
• Have lifting supervisor qualification and/or actual lifting experience preferably
  

Maintenance Spare Parts Store Supervisor / Storekeeper
Working hours: 8am to 4.30pm (Mon-Fri)
Work location: Jurong Island (Transport provided at Jurong East MRT)
Salary: $3500- $500 + 200 (Site Allowance)
Job Purpose:
To manage, control, and supervise the maintenance spares and materials store to ensure timely availability of critical spares, consumables, and tools for smooth plant operations. Responsible for inventory accuracy, housekeeping, safety compliance, and cost-effective management of store activities.
1. Inventory & Stock Management
Maintain accurate records of spares in the store.
Ensure proper receipt, storage, and issuance of spare parts and materials as per company procedures.
Conduct regular stock checks, cycle counts, and annual inventory audits.
Monitor stock levels and initiate timely reordering of critical spares.
Manage slow-moving and obsolete inventory, providing recommendations for disposal or reuse.
Continuous Improvement of existing inventory management systems
Conduct annual stock take as per accounting requirements
2. Store Operations & Housekeeping
Supervise day-to-day store operations, ensuring materials are organized, labelled, and stored safely.
Implement proper handling, preservation, and storage of sensitive spares (e.g., bearings, electrical/electronic parts).
Maintain proper housekeeping, 5S standards, and compliance with safety requirements.
Ensure proper documentation (Goods Receipt, Goods Issue Slips, Return Notes, Gate pass).
3. Coordination & Support
Work closely with the Maintenance team to ensure availability of required spares for preventive and corrective maintenance.
Coordinate with Procurement and Vendors for delivery and warranty claims.
Support shutdown/turnaround activities by ensuring availability and staging of spares.
4. System & Reporting
Update and manage GSAP / ZOHO / Other ERP system for all inventory transactions.
Generate stock consumption reports, monthly KPI reports, and variance reports.
Track and control spare parts cost, ensuring budget compliance.
5. For Supervisor role
Supervise store personnel and contractors, ensuring work discipline and compliance.
Provide training and guidance to store staff on inventory control and safe material handling.
Ensure adherence to company policies, quality standards, and audit requirements.
Requirements:
Diploma or ITE in Mechanical, Electrical, Industrial Engineering, or a related field.
3–5 years of relevant experience in maintenance stores, warehouse operations, or inventory management.
Familiarity with spare parts related to rotating equipment, instrumentation, and electrical systems is an added advantage.
WhatsApp: (Shermaine)
Siah Sze Ming Reg No: R
The Supreme HR Advisory Pte Ltd EA No: 14C7279
#J-18808-Ljbffr

Responsibilities:

• Able to lead, supervise and coordinate all fire protection system works (fire alarm, sprinkler, hydrant, hose reel, and suppression systems etc.)
• Ensure compliance with local codes, standards, and authority requirements (SCDF, FSSD submissions etc.)
• Review drawings, specification and technical documents
• Liaise with consultants, subcontractors, and relevant authorities to resolve design and site issues
• Conduct site inspections to ensure proper installation, testing and commissioning of fire protection systems
• Provide technical support during project execution and ensure timely delivery of fire-related works
• Prepare reports, method statements and documentation for submission
• Support safety compliance and risk assessments related to fire protection systems

Requirements:

• Degree/Diploma in Mechanical/Electrical Engineering or related discipline
• Minimum 5 years of relevant experience in fire services works
• Familiar with local regulations, SCDF Codes of Practice and FSSD submission procedures
• Strong problem-solving, coordination and communication skills
• Able to work independently and under pressure to ensure good site progress
• Good safety knowledge and attitude
• Ability to multi-task in a fast paced and dynamic environment
• Self-motivated with good organizational skills and ability to liaise with the authorities

Information provided in response to this job advertisement will be treated in strict confidence and be used for recruitment purpose only.

The Mechanical Engineer shall be responsible to perform engineering analytics, provide engineering solutions and perform defect investigations to support equipment refurbishment & maintenance projects. The candidate shall be required to independently conduct defect troubleshooting, failure analysis, engineering analysis and develop engineering solutions to the problems identified. The candidate shall also collaborate with other internal and external stakeholders on engineering and maintenance efforts and ensure high equipment reliability and availability.

Responsibilities

• Lead in the identification and consolidation of engineering standards for the respective mechanical/electrical and electronics/hydraulic and structural systems/thermal systems.
• Develop work instructions, test parameters, test jigs and test benches to enhance equipment repair and overhaul capabilities.
• Lead in the conduct of engineering analytics for equipment failure and trending of defect data to seek engineering insights and identify areas for reliability and safety improvements.
• Lead in the development of in-house capabilities to support the evolution from preventive to predictive maintenance.
• Lead in the development of engineering solutions, propose relevant modifications and work with Ops and Maintenance team to implement and validate safety and effectiveness of the solutions.
• Identify / develop / evaluate alternate parts, out-of-manual repair and modifications to support obsolescence management.
• Lead in the conduct of defect investigation to identify root cause and follow-up, including developing of fault tree analysis, FEMCA and conduct of forensic investigation.
• Perform review of project design specifications to support refurbishment & maintenance projects to ensure adequate safety, reliability, maintainability and operability considerations.
• Any other tasks assigned by supervisor.

Qualifications & Work Experience

• Diploma or Degree in Mechanical / Electrical & Electronic Engineering/Mechatronics Engineering or equivalent from a recognized institution.
• Preferably with at least 2 years' working experience in automotive, aerospace or heavy equipment environment.
• Fresh graduates from local universities are welcome to apply.

Skills

• Comfortable to work hands-on in a maintenance workshops environment alongside other Engineers, Assistant Engineers and Technical Officers.
• Adept with diagnostics and reliability engineering methods such as FMECA, Fault Tree analysis etc.
• Possess basic understanding of hydraulic/electrical/mechanical systems for vehicular platforms.
• Able to read and understand technical/ electrical drawings.
• Equipped with Solidworks Software skills for 3D Modelling and Drafting.
• Possess knowledge in Finite Element Analysis (FEA) an advantage.
• Good interpersonal and communication skills.
• Able to present ideas, approach, and objectives clearly.
• Strong analytical and decision-making abilities.
• Able to work independently and as a team effectively adjusting oneself flexibly to different work situations.
• Effective organizational and planning skills.