2,402 Manufacturing & Production jobs in Singapore

Join to apply for the Assistant Principal Engineer / Senior Engineer (Technological Process) M/F (H/F) - SAFRAN ELECTRICAL & POWER role at AEROCONTACT

Safran Electrical & Power is a global leader in electrical systems for aerospace. The company focuses on electrification of equipment and propulsion, with 14,000 employees across 13 countries.

Singapore

Provide support to the Production Manager in the execution of initiatives relating to technological processes.

• Process implementation in accordance with company requirements
• Lead in the area of technical expertise, Electro-Mechanical and Special Processes
• Support in new supplier selection, technical audits and qualification
• Lead investigations during technical events
• Support New Product Introduction (NPI) and lead PRR activities
• Develop and qualify new processes and capabilities
• Support industrialization activities

• Diploma / Degree in Mechanical, Electronics, Electrical or Industrial Engineering or Bachelor of Science
• Minimum 5 to 10 years' experience in a manufacturing environment
• Experience in Electronic Equipment and Mechanical manufacturing, preferably in low volume, high mix environments

• Employment type: Full-time

This description retains the original job information while removing unrelated postings and boilerplate. EEO statements and legal notices remain as appropriate.

SMC (Systems on Silicon Manufacturing Company Pte. Ltd.) is a Joint Venture between NXP and TSMC. We offer flexible and cost-effective semiconductor fabrication solutions by maintaining fully equipped SMIF cleanroom environment, 100% equipment automation and proven wafer-manufacturing processes.

We're looking for innovative, passionate, and talented people like you to join our team.

We’re searching for aEngineer/ Senior Engineer to be part of ourProduct & Test Engineering (Product Engineering) Department diverse team of talent.

What you will be working on:

Ensuring 1st time yielding silicon, benchmark D0 for baseline and products.

Odentify & resolve Product, Test & Fab-Process related yield limiters in shortest time possible.

Technical interface with Business Lines/customers

Driver for yield improvement

Resolve product yield, quality and reliability issues

Perform pre-tapeout risk assessment and communicate with Business line/Fab on the necessary actions to eliminate/minimize the risk.

Work with Customers/Mother Fab on the DfM related issue.

Conduct product yield analyses to identify root cause of wafer sort and final test failures

Set up fault diagnostic capabilities for yield improvement

Work with Business line/customers on product low yield disposition

Perform electrical and physical failure analysis to isolate fail location

Drive the yield improvement task force

More about you:

Master/bachelor’s degree in electrical / Electronic Engineering or Science in Physics

2 — 8 years product and/or test engineering, failure analysis or process-integration experience

Experience in Fab process, yield engineering or design will be an added advantage

In depth knowledge of semiconductor device physics, electrical & electronics engineering fundamentals & wafer fabrication processes

Strong analytical & problem-solving skills

Good interpersonal and communication skills

SSMC is firmly committed to upholding equal employment opportunities for all individuals. We strictly adhere to the Tripartite Guidelines on Fair Employment Practices (TGFEP), the Singapore Food Safety and Security Act 2025 (FSSA 2025), and the Singapore Code of Advertising Practice. All qualified applicants will receive non-discriminatory consideration for employment on the basis of merit and regardless of age, race, gender, religion, marital status and family responsibilities, or disability, or any other attributes as protected by the relevant laws.

Specialization : Others

Type of Employment : Permanent

Minimum Experience : Fresher

Work Location : Singapore

If you encounter difficulties, please click here for technical assistance.

Copyright 2024. All Rights Reserved. Systems on Silicon Manufacturing Co. Pte. Ltd.

Who We Are

Applied Materials is a global leader in materials engineering solutions used to produce virtually every new chip and advanced display in the world. We design, build and service cutting-edge equipment that helps our customers manufacture display and semiconductor chips – the brains of devices we use every day. As the foundation of the global electronics industry, Applied enables the exciting technologies that literally connect our world – like AI and IoT. If you want to push the boundaries of materials science and engineering to create next generation technology, join us to deliver material innovation that changes the world.

Location: Singapore,SGP

You’ll benefit from a supportive work culture that encourages you to learn, develop, and grow your career as you take on challenges and drive innovative solutions for our customers. We empower our team to push the boundaries of what is possible—while learning every day in a supportive leading global company. Visit our Careers website to learn more.

At Applied Materials, we care about the health and wellbeing of our employees. We’re committed to providing programs and support that encourage personal and professional growth and care for you at work, at home, or wherever you may go. Learn more about our benefits (

• Lead and establish a group of engineers to establish pilot production line and associated operations, tools, MES system from scratch.
• Establish pilot production line key performance Indices and report out status on a periodic basis to key stakeholders.
• Responsible for day-to-day management and operations of pilot production line and resources including manpower, tools, systems to ensure uptime, wafer runs are meeting requirements
• Responsible to lead and manage forecast/demand planning, production schedule run and capacity in pilot production line and ensure meeting demand, outputs and timeline
• Ensure processes, test vehicles developed from R&D are successfully transferred to pilot production line.
• Lead and manage productivity improvement efforts in existing line and future line to identify gaps and drive actions to close them.
• Lead a yield management and improvement efforts to ensure meeting targets in terms of wafer/ lot/ line yield

Working with material, equipment engineers and vendors to select and procure the necessary tools and equipment for the fab. This involves evaluating equipment specifications, negotiating contracts, managing the procurement process, and overseeing the installation and setup of the equipment.

Coordinating with process engineers to develop and optimize the manufacturing processes for the new fab. This includes understanding the device requirements, conducting experiments, making process adjustments, and ensuring the desired performance and yield are achieved.

Developing production plans and schedules to optimize fab utilization and meet customer demand. This involves analyzing capacity, prioritizing orders, coordinating with supply chain teams, and ensuring efficient production flow.

Implementing quality management systems and procedures to ensure consistent and reliable manufacturing. This includes establishing quality control measures, conducting inspections and audits, and implementing corrective actions to address any quality issues.

Ensuring compliance with all applicable environmental, health, and safety regulations. This involves implementing safety protocols, conducting risk assessments, providing employee training, and maintaining documentation to ensure a safe and compliant work environment.

Driving continuous improvement initiatives to enhance fab operation efficiency, productivity, and quality. This involves analyzing data, identifying areas for improvement, implementing process optimizations, and fostering a culture of innovation and learning.

Building and leading a skilled team of engineers, technicians, and operators to ensure smooth fab operation. This includes recruiting and training personnel, setting performance goals, providing guidance and support, and fostering a collaborative and productive work environment.

Working closely with cross-functional teams, including process engineers, equipment engineers, supply chain, and customer support teams, to ensure effective collaboration, alignment, and communication throughout the fab operation

• At least 10 to 15 years of semiconductor wafer fab production experience
• Strong organization, management, communication skills with attention to details.
• Experienced as people and team management will be essential.
• Experienced in setting up pilot production from scratch or transferred technology from site to site and ramp from pilot to production will be advantageous.
• Experience in managing multiple projects within scope, budget, and timeline with flexibility to adapt to changing priorities.
• Demonstrate ability and experience to work, solve complex problems and drive projects to end goals completions.
• Minimum bachelor’s degree in STEM disciplines e.g. Physics, Chemistry, Electrical, Mechanical, or Materials Science Engineering

• Science Park II

Time Type: Full time

Employee Type: Assignee / Regular

Travel: Yes, 10% of the Time

Relocation Eligible: No

Applied Materials is an Equal Opportunity Employer. Qualified applicants will receive consideration for employment without regard to race, color, national origin, citizenship, ancestry, religion, creed, sex, sexual orientation, gender identity, age, disability, veteran or military status, or any other basis prohibited by law.

Job Responsibilities:

• Contribute to Life Science projects for Antaes Asia clients
• Act as a key member of the Quality Systems team, providing quality oversight for validation activities, including the critical area of Data Integrity
• Ensure compliance with regulatory standards and internal policies for all validation processes
• Collaborate with Subject Matter Experts (SMEs) and the validation team to conduct gap analysis and risk assessments prior to qualification activities.
• Identify potential gaps and risks, proposing effective mitigation strategies to ensure compliance and operational excellence.
• Participate in investigations related to validation discrepancies and assist in reviewing and approving discrepancy reports.
• Support the closure of Corrective and Preventive Actions (CAPA) associated with validation issues, ensuring timely and effective resolution.
• Review and approve a wide range of validation documentation, including but not limited to protocols and reports, ensuring accuracy, compliance, and alignment with quality standards.
• Provide critical feedback and ensure that validation documents meet regulatory and company requirements.
• Serve as a resource for validation-related queries and issues, providing guidance to teams and ensuring swift resolution of problems.
• Review and approve Standard Operating Procedures (SOPs), FORMs, Manufacturing Batch Records, and other relevant procedural documents to ensure they align with current good manufacturing practices (cGMP) and company policies.
• Contribute to the promotion of Antaes services on top of assistance provided to clients

Job Requirements:

• Bachelor’s Degree in Biomedical Engineering, Biotechnology, Science or equivalent
• 2-4 years of experience in a Quality Systems role within the pharmaceutical or biotechnology industry
• Experience with validation processes and quality oversight, including data integrity
• Strong understanding of cGMP regulations and validation principles
• Experience with risk assessment, gap analysis, and CAPA processes
• Problem-solving ability with a focus on proactive solutions and process improvement
• Candidate must be highly motivated, be able to work independently as well as in a team and have good organizational and oral and written communication skills
• Excellent communication skills, both written and verbal, in English

Overview

NTI NAND Senior/Principal Process Integration Engineer at Micron Technology.

• Identify and quantify key module deficiencies and technology gaps. Lead cross-functional teams to address these issues. Improve current process flows and develop innovative solutions to meet product requirements and manufacturability.
• Develop or redefine CSPEC criteria for optimal product performance and drive activities to ensure manufacturing process capability.
• Coordinate activities at the manufacturing site to secure funding for experiments and conversions, and effectively communicate decisions to relevant R&D, Product Engineering, and Manufacturing partners.
• Undertake development projects to evaluate and implement new integration schemes for alpha and derivative part types. Establish proof of concept for future tech nodes at the manufacturing facility.
• Take on a leadership role at quarterly yield summits and monthly program reviews to summarize complex problems, explain actions taken to address them, and align R&D, Manufacturing, and senior management teams.
• Assist in the transfer of new technology from R&D to manufacturing. Contribute to ensuring a successful ramp-up and qualification. Support the transfer, documentation, and training of module fundamentals into manufacturing.

• Must have:
• Passionate about semiconductor technology and innovation.
• Adept at data analysis, problem-solving, and process integration optimization.
• Excellent communication skills and ability to work in cross-functional teams.
• Preferred to have Skills / Experiences as below:
• Proficiency in scripting/programming/engineering/business intelligence/Analytics software, such as Python, SolidWorks, Tableau, Power BI, etc. is desirable.
• Minimum of 3 years of experience in the semiconductor industry in the areas of Process Integration and Yield Enhancement.
• Ability to develop a strong holistic end-to-end understanding of particular PI modules on new NAND technologies and related structural & electrical fail mechanisms.
• In-depth knowledge and direct experience with non-volatile memories (NAND) along with good understanding of the NAND process flow, the interaction of process & device, and common yield & reliability issues.
• Exposure to R&D and transfer/manufacturing is desirable.
• Committed to quality, collaboration, and continuous improvement.
• Ability to be self-motivated, and self-governing with proven ability to work in a demanding & dynamic environment.
• Extended travel to the US spanning several months to a year will be a requirement for the role.

BS, MS/PhD in Electrical Engineering, Microelectronics, Chemical Engineering, Material Science or a related field.

We are an industry leader in innovative memory and storage solutions transforming how the world uses information to enrich life. With a relentless focus on our customers, technology leadership, and manufacturing and operational excellence, Micron delivers a rich portfolio of high-performance DRAM, NAND, and NOR memory and storage products through our Micron and Crucial brands. Every day, the innovations that our people create fuel the data economy, enabling advances in artificial intelligence and 5G applications that unleash opportunities — from the data center to the intelligent edge and across the client and mobile user experience.

All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran or disability status. To request assistance with the application process and/or for reasonable accommodations, please contact

Micron Prohibits the use of child labor and complies with all applicable laws, rules, regulations, and other international and industry labor standards. Micron does not charge candidates any recruitment fees or unlawfully collect any other payment from candidates as consideration for their employment with Micron.

Fraud alert: Micron advises job seekers to be cautious of unsolicited job offers and to verify the authenticity of any communication claiming to be from Micron by checking the official Micron careers website.

Validation Engineer

Overview:

Under general supervision, reviews specifications and determines the critical aspects of facilities, utilities, computer systems and manufacturing equipment with regard to product and process quality, writes qualification protocols for operating systems and records related test results, prepares final reports that identify the results of protocol testing and the conditions of release.

Essential Job Functions:

1. Carries out responsibilities in accordance with the organization's policies, procedures, and state, federal and local laws.
2. Writes protocols that challenge the critical parameters related to installation, operation, and performance of the related facility, utilities, computer systems, or equipment.
3. Assures that protocols are approved through proper channels; writes and revises validation protocols.
4. Executes validation and qualification protocols per related SOPs and assures that acceptance criteria related to validation and qualification protocols are met.
5. Analyzes new and existing equipment, recommends equipment modifications as needed for validation optimization.
6. Assures that all test data is gathered and recorded in accordance with cGMP requirements.
7. Analyzes data to ascertain if it meets related protocol acceptance criteria; writes deviation reports as required upon failures to meet protocol acceptance criteria.
8. Writes final reports and assures that they are approved through proper channels.
9. Performs necessary equipment and system IQ, OQ, and PQ's to assure compliance in all manufacturing and support areas.
10. Develops and communicates project timelines and status.
11. Complies with all GMP and safety requirements, SOP's and Company policies and procedures.
12. Performs related duties as assigned.
13. Works in a self-directed manner and must be able to work on problems of a complex scope where analysis of data requires an in-depth evaluation of various factors.
14. Exercises judgment within broadly defined practices and policies in selecting methods, techniques and evaluation criteria for obtaining results.
15. Demonstrates understanding and use of statistical methods in experiment design, data analysis, validation, and process monitoring.

Process Engineer

1. Coordinates all work related to Process Engineering deliverables on scheduled projects needed to meet the deadlines developed by Plant Capital Plan, New Product Introductions, and New Process Technology Developments.
2. Responsible for manufacturing engineering support, the development of new process technologies, and the support of new product introductions/tech transfers.
3. Organizes testing associated with the development of new process technologies and the support of new product introductions/tech transfers and works closely with the overall Tech Transfer team.
4. Works closely with technical services to develop and confirm Critical and Key Process Parameters needed for Equipment and Process Validation. Develops and delivers presentations to communicate project timelines and milestone completions.
5. Serves as the Subject Matter Expert for equipment and processes within area of responsibility and thereby serves as the SME for investigations, design reviews, equipment/process troubleshooting, Capital Project planning, change control and other related activities for the site.
6. Able to work well in cross functional teams, demonstrating good communication and presentation skills, strong technical understanding, general automation knowledge, multi-tasking and time management.
7. Works effectively with others from diverse backgrounds and demonstrates capability to adapt to new, different, or changing requirements. Displays strong moral principles and work ethics while demonstrating initiative. Maintains a professional presence and displays responsible behaviors.
8. Develops conceptual strategies, processing schemes, feasibility studies, PFD’s, and detailed scopes of work.
9. Identifies and executes projects to increase safety, reduce product cost, improve product quality, improve yield, and reduce material usage.
10. Works on several different projects and is able to prioritize these projects.
11. Assists in developing control strategy and instrument process design, including emergency and shutdown procedures, instrument specification sheets, control ranges, alarm points, and automation strategy.
12. Authors, updates, reviews, and approves area procedures and master batch records to ensure correct content and compliance with Good Manufacturing Practices.
13. Designs studies, executes experiments and performs data analysis.
14. Writes study proposals, progress reports, development reports, and various technical memos.
15. Evaluates new technologies to improve the commercial production process.
16. Supports scale up activities from R&D to production.
17. Provides miscellaneous overhead support of facility.
18. Supports the assurance of a robust manufacturing process for the current registered process as experience is gained post launch.
19. Sets up robust process for troubleshooting.
20. Acts as an effective change agent.
21. Acts as a key player for the expansion of projects as needed to increase scale of manufacture.
22. Investigates deviations from standards of manufacturing process using effective root cause analysis tools. Recommends and implements effective corrective and preventative actions.
23. Generates, evaluates, and implements innovative and creative solutions.
24. Assists as subject matter expert for technical projects.
25. Capable of generating a project scope and cost plan to effectively draft a capital request.
26. Develops product and process knowledge in multiple process train areas.
27. Contributes to equipment URS development and retrofit. Participates in equipment FAT’s, SAT’s, etc.
28. Participates in Quality Risk Assessments and process hazards analysis activities.

Job skills & knowledge:

1. Current Good Manufacturing Practices (cGMP), Food and Drug Administration (FDA), and other regulatory requirements.
2. Pharmaceutical principles, practices, and applications.
3. Principles of mathematical and statistical computations.
4. Interpreting software and ladder logic diagrams and flowcharts.
5. Interpreting electrical and mechanical blueprints and specifications including HVAC systems and construction plans.
6. Solving practical problems and considering a variety of concrete variables in situations where only limited standardization exists.

Basic Qualifications

1. Min 5 years experience working in a regulated environment.
2. Working knowledge of Standard Operating Procedures and Protocols/Reports.
3. Understanding of validation/qualification strategies.
4. Knowledge of applicable quality regulations and standards.
5. Quality or quality support experience in a regulated environment (GLP, cGMP, ISO).
6. 3 years quality assurance or quality control experience in cGMP pharmaceutical or drug development organization.
7. Working knowledge of facility equipment commissioning and qualification.
8. Working knowledge of process and cleaning validation.
9. Working knowledge of Computer System Validation.
10. Quality assurance or quality control experience in a cGMP pharmaceutical setting.
11. Education: B.S. in an Engineering discipline, or Life Science degree.
12. Required: 3-5 years quality or quality support experience in a cGMP pharmaceutical setting.
13. Desired: 4-7 years facility, equipment, and/or cleaning validation experience in a cGMP manufacturing setting.
14. Sound working knowledge of processing equipment used to manufacture APIs.
15. Knowledge of clean room standards.

Professional Skills, Qualifications and Experience:

1. Strong ability to manage multiple priorities, self-starter attitude, good oral and writing skills and the ability to work independently and as a team in an efficient manner.
2. Working knowledge of current regulatory guidelines and standards.
3. Ability to apply and incorporate pharmaceutical standards, rules, and guidances. (e.g. FDA, EU, ISO, ICH, ISPE, etc.)
4. Comfortable in a fast-paced environment with the ability to adjust to changing priorities.
5. Flexible and accountable.
6. Detailed oriented work standards.

Interested candidates please send a copy of your resume to 
Email Subject: Validation / Process Engineer

Leon Leong De Cong
R
Recruit Express Pte Ltd (Healthcare & Lifesciences Division)
EA License: 99C4599

BD Director/Manager (OEM Contract Manufacturing)

We are seeking an influential and dynamic Global Senior Leader for Business Development to spearhead our business expansion and revenue growth strategies at a global scale. The Senior Leader will be responsible for developing and executing aggressive growth strategies, managing key customer relationships, and forging new strategic partnerships. To be successful in this role, you should be a seasoned strategist with a sound knowledge of the contract manufacturing sector, a proven track record in sales, and prowess in forming high-level partnerships with clients globally.

• Development and Execution of Growth Strategies: Lead the development, refinement, and execution of global growth strategies for our contract manufacturing services. Deliver a deep understanding of current market trends, client needs, and competitors. Based on this analysis, develop unique selling propositions and action plans to accelerate growth.
• Customer Relationship Management: Develop and nurture key customer relationships globally. Act as the point of contact for our key customers, ensuring the highest levels of customer satisfaction and negotiating strategic contracts.
• Business Development: Implement new business initiatives across the new and existing markets. Reach out to prospects, build relationships, and close deals to drive growth.
• Strategic Partnerships: Develop overarching strategies to identify and forge strategic alliances, partnerships, joint ventures, and other opportunities that can boost the company’s growth trajectory on a global scale.
• Cross-functional Leadership: Work collaboratively with cross-functional teams, including sales, marketing, operations, and engineering, from conceptualisation through to product lifecycles. Ensure business decisions align with the company's direction and its strategic imperatives.
• Team Development: Represent the company professionally and ethically at all times, serve as a role model for senior company leaders, and mentor future leaders.

• At least 15 years of experience in senior management roles, preferably with global responsibilities in contract manufacturing industries.
• Proven track record in developing and implementing successful business growth strategies.
• Excellent negotiation and leadership skills.
• Strong customer-focused mindset with the ability to convert customer needs into successful business deals.
• Strong strategic thinking and problem-solving skills with the ability to manage complex situations.
• Experience in contract negotiations with key clients and forming strategic partnerships.
• Strong global business acumen and understanding of market dynamics and requirements.
• Engaging and persuasive communication with excellent interpersonal skills.
• Bachelor's degree in business, marketing, engineering or a similar field (Master's preferred).
• Willingness to travel globally.
• Manager/Senior Manager/Director/Vice President level candidates are welcome to apply. Position offered commensurate with experience.

Techware is a leading provider of comprehensive advanced manufacturing services, catering to a diverse range of industries including Semiconductor, Medical, Aerospace, Automotive, and Oil & Gas. Strategically headquartered in Singapore, we also operate manufacturing facilities in China, Malaysia and Philippines. We specialize in Precision Machining, adhering to the strictest tolerances, and offer high-tech fabrication of sheet metal components, welding of crucial structures/frames, wire and cable harnessing along with complete system integration, assembly, and rigorous testing of equipment. Techware Group is a synergistic amalgamation of various companies, with our business operations spanning across diverse sectors. We have established a strong presence in Singapore, Malaysia, China, Philippines, Korea, Taiwan, UK, and the US, demonstrating stable, long term growth and an expanding global footprint.

Opportunity for a technical candidate with hands-on experience in laser technology products to join as a Process Engineer to develop, evaluate and improve manufacturing flows and methods.

Role:

• Develops, implements and maintains methods, operation sequence, processes and systems in the manufacture of sub-assemblies, precision cleaning and final assemblies of laser system.
• Set up and maintain bill of materials, process flow and routing, process layout to ensure smooth physical, materials, documentation and system flow throughout the operations.
• Drives continuous improvement in quality, productivity, cycle time, inventory management and cost
• Estimates manufacturing cost, determines time standards, and makes recommendations for tooling and process requirements of new or existing product lines.
• Maintains records and reporting systems for coordination of manufacturing operations.
• Proficiency in Oracle System is an advantage

Experience

• Bachelor in engineering with 2 to 5 years’ experience in Manufacturing Engineering process focus.
• Proficient in Lean thinking and application will be an advantage
• Excellent interpersonal skills with good verbal and written communication skills.
• Self-directed and able to work independently with little or no direct supervision Analytical problem-solving skills with a focus on innovation and reliability.
• Strong communication and teamwork abilities.

Interested applicants, please submit your profile to for review. We will be in touch for initial discussion upon being shortlisted

EA Licence: 17S8795 | EAP: R

Select how often (in days) to receive an alert for similar jobs:

Location:

Singapore, SG,

Job Function: Engineering R&D

Job Type: Regular Full Time

ENABLE your future through light.

Excelitas is a global technology leader with more than 7,500 employees, focused on delivering market-driven solutions to fulfill the illumination, optical, detection and imaging needs of OEMs and end-users across the biomedical, semiconductor, industrial, consumer products, scientific, security, defense, and aerospace sectors.

ENGAGE with us today and make your contribution to the future! Join the team that leading technology companies turn to for cutting-edge photonic innovation. At Excelitas Technologies you are how we EXCEL.

Our facility in Singapore has key functions in research and development, procurement, sales and finance for our Lighting and Detection business lines, in addition to key functions related to our Optics Manufacturing capabilities.

This siteproduces optical lenses such as spherical, aspherical and plano optics, with large machine shop capabilities and expertise in optical coating and assembly. Our photonic products and solutions serve a wide range of markets and applications in the areas of medicine, life science, industrial manufacturing, defense, and aerospace, as well as research and development.

We are presently seeking a Senior Process Engineer that will support the Commercial Business team in resolving technical queries from customers and coordinating activities with various stakeholders across cross-functional departments within the organization. The role ensures that operations are carried out effectively to meet the final deliverables of the build plan.

Main responsibilities:

• Conduct product qualification and ensure intended specifications are achieved.
• Develop new or improve existing processes and documentation for assembly builds to achieve sustainable production yields.
• Design and qualify tooling/fixtures necessary to support product builds.
• Introduce new technology capabilities to enable the manufacturing of new NPI assemblies.
• Provide technical support to the Sales & Marketing team for customer inquiries.
• Review technical data packs for NPI products or new product variants for RFQ purposes and in-house manufacturing feasibility assessments.
• Provide technical recommendations or conduct evaluations in response to customer inquiries.
• Introduce value-added services such as product design improvement recommendations or troubleshooting support at higher-level system integration at the customer’s site.
• Plan and support key activities related to build plan completion and product qualification.
• Support the Planning Team in developing realistic build schedules for NPI product assemblies.
• Coordinate work activities with cross-functional stakeholders to ensure the build plan remains on track.
• Review and translate customers' product quality specifications into internal manufacturing requirements to ensure product quality performance.
• Perform in-depth root cause analysis of product failures/returns and recommend practical solutions.
• Develop the Assembly Process Sheet (APS) with work instructions for production teams to carry out assembly builds.
• Provide accurate routing details in accordance with the APS.
• Create Standard Operating Procedures (SOPs) for critical processes used in assembly production.
• Review and enhance existing process methodologies to improve manufacturing KPIs such as process yield, scrap rates, and productivity.

Requirements:

• Degree in Mechatronics/Electrical & Electronics.
• Diploma holders with an extensive portfolio of achievements will also be considered.
• Minimum of 3 years’ experience in NPI or process engineering-related fields.
• Prior experience in the semiconductor equipment or optics industry will be advantageous.
• Proficient in MS Word, PowerPoint, and Excel.
• Skilled in drawing software such as AutoCAD or SolidWorks.
• Familiar with engineering tools: 8D, Root Cause Analysis, PFMEA, CPK Analysis, and Gauge R&R analysis.
• Knowledge of cleanroom protocols.
• Self-initiative and innovative in deriving solutions.
• Ability to lead cross-functional teams in resolving technical issues.

Minorities/Females/Disability/Gender Identity/Sexual Orientation

Excelitas is seeking leaders and innovators to join our global team! Visit: