364 Failure Analysis jobs in Singapore

Please note that this is a yearly renewable contract position.

Engineer's Responsibilities

• Troubleshoot all products/test equipment on the production floor.
• Debug and repair production line rejects.
• Liaise with different departments on resolving various issues.
• Able to work well in a cross functional team.
• Perform Electrical/Electronic analysis and compile report for failure analysis purposes.
• Provide real time feedback on the process related defects.
• Support production on setting up of equipment, jigs and fixtures.
• Handle any ad-hoc assignments.

Requirements:

• Diploma/Degree with 3 years' relevant experience for Engineer level.
• Familiar with test system, debug and repair in PCBA.
• Good Knowledge in Analog and Digital Circuits.
• Effective communicator and team player who can work well in cross functional teams.
• Two shifts will be offered, Morning Shift 8:20am to 5:50pm (Monday to Friday)/Night Shift 5:50pm to 5:50am (Monday to Thursday).

Please note that this is a yearly renewable contract position.

Technician's Responsibilities

• Troubleshoot all products/test equipment on the production floor.
• Debug and repair production line rejects.
• Liaise with different departments on resolving various issues.
• Able to work well in a cross functional team.
• Perform Electrical/Electronic analysis and compile report for failure analysis purposes.
• Provide real time feedback on the process related defects.
• Support production on setting up of equipment, jigs and fixtures.
• Handle any ad-hoc assignments.

Requirements:

• Diploma/Degree with 3 years' relevant experience.
• Familiar with test system, debug and repair in PCBA.
• Good Knowledge in Analog and Digital Circuits.
• Effective communicator and team player who can work well in cross functional teams.
• Two shifts will be offered, Morning Shift 8:20am to 5:50pm (Monday to Friday)/Night Shift 5:50pm to 5:50am (Monday to Thursday).

Job Responsibilities

• Operate Failure Analysis (FA) laboratory equipment to support daily lab operations and complete additional assigned tasks.

• Perform general failure analysis, including electrical and physical FA, and assist in developing new analysis techniques.

• Handle chemicals safely using appropriate Personal Protective Equipment (PPE).

• Apply knowledge of mobile phones, computer hardware, and components during analysis.

Utilize test knowledge and hands-on skills to support lab operations effectively.

Job Requirements

• Higher NITEC or Diploma in Engineering.

• Analytical skills and proficiency in Microsoft Office.

• Ability to work independently, prioritize tasks, and meet deadlines.

• Positive attitude, strong work ethic, and flexibility to work mid-week/weekend shifts or overtime if required.

• Entry-level candidates or those with no prior experience are welcome to apply

Who We Are

Applied Materials is a global leader in materials engineering solutions used to produce virtually every new chip and advanced display in the world. We design, build and service cutting-edge equipment that helps our customers manufacture display and semiconductor chips – the brains of devices we use every day. As the foundation of the global electronics industry, Applied enables the exciting technologies that literally connect our world – like AI and IoT. If you want to push the boundaries of materials science and engineering to create next generation technology, join us to deliver material innovation that changes the world.

What We Offer

Location:

Singapore,SGP

You'll benefit from a supportive work culture that encourages you to learn, develop, and grow your career as you take on challenges and drive innovative solutions for our customers. We empower our team to push the boundaries of what is possible—while learning every day in a supportive leading global company. Visit our Careers website to learn more.

At Applied Materials, we care about the health and wellbeing of our employees. We're committed to providing programs and support that encourage personal and professional growth and care for you at work, at home, or wherever you may go. Learn more about our benefits.

We are seeking a highly skilled Senior Failure Analysis Engineer to join our semiconductor engineering team. In this role, you will be responsible for identifying, analyzing, and resolving failures in semiconductor devices, providing root cause analysis (RCA), and driving corrective actions to improve product reliability.

Key Responsibilities:

• Lead electrical, physical, and material failure analysis on semiconductor components (e.g., ICs, wafers, packages).
• Perform root cause analysis using various analytical techniques (e.g., SEM, FIB, TEM, EDX, X-ray, OBIRCH, TLP, curve tracing, decapsulation).
• Provides Electrical and Physical failure isolation analysis support to localize failure defect and determine root cause of failure in silicon devices
• Drive continuous improvement in quality, productivity, cost and safety of work processes and environment to achieve assigned section/department and/or company KPI.
• Collaborate with design, product, reliability, and process engineering teams to evaluate failures and recommend corrective actions.
• Prepare detailed failure analysis reports and present findings to internal stakeholders and customers.
• Support new product introduction (NPI) by identifying potential failure modes during qualification.
• Manage lab equipment operation and maintenance, and ensure proper calibration and usage.
• Drive continuous improvement of failure analysis processes and methodologies.
• Formulate concise failure analysis reports and responsible in failure analysis results presentation to stakeholders

Required Qualifications

• Requires a Bachelor Degree or Master in Engineering (Electrical &/or Electronics, Microelectronics, Physics, Material Sciences, Chemical)
• Good Understanding in Semiconductor fundamentals, process flow, transistor device physics and circuit design and analysis are highly valued.
• Familiar with failure mode and effects analysis (FMEA)
• Established in hands-on EFA skillsets to perform Electrical fault isolation using laser induced techniques, photon emission and thermal microscopy with good understanding on techniques strength and limitation
• Established in hands-on PFA skillsets to perform Physical Failure analysis methods including mechanical polishing/delayering, SEM inspection, FIB analysis and chemical etch procedures, for sample preparation and defect viewing
• Experience on operating lab electronic instruments, ie Parametric Analyzers, are highly valued.
• Works on improvement projects, take on tool ownership responsibilities and documentation of SOPs and specifications
• Motivated, Committed, Works well in teams, possess good communication skills

Additional Information

Time Type:

Full time

Employee Type:

Assignee / Regular

Travel:

Yes, 20% of the Time

Relocation Eligible:

No

Applied Materials is an Equal Opportunity Employer. Qualified applicants will receive consideration for employment without regard to race, color, national origin, citizenship, ancestry, religion, creed, sex, sexual orientation, gender identity, age, disability, veteran or military status, or any other basis prohibited by law.

About Us

Applied Materials is an innovation-driven company. We are the leader in materials engineering solutions used to produce virtually every new chip and advanced display in the world. Our ability to identify emerging technologies that can complement and leverage Applied's materials engineering expertise is critical to the company's continued growth.

About The Role

We are seeking a highly skilled Senior Failure Analysis Engineer to join our semiconductor engineering team. In this role, you will be responsible for identifying, analyzing, and resolving failures in semiconductor devices, providing root cause analysis (RCA), and driving corrective actions to improve product reliability.

Responsibilities:

• Lead electrical, physical, and material failure analysis on semiconductor components (e.g., ICs, wafers, packages).
• Perform root cause analysis using various analytical techniques (e.g., SEM, FIB, TEM, EDX, X-ray, OBIRCH, TLP, curve tracing, decapsulation).
• Provides Electrical and Physical failure isolation analysis support to localize failure defect and determine root cause of failure in silicon devices
• Drive continuous improvement in quality, productivity, cost and safety of work processes and environment to achieve assigned section/department and/or company KPI.
• Collaborate with design, product, reliability, and process engineering teams to evaluate failures and recommend corrective actions.
• Prepare detailed failure analysis reports and present findings to internal stakeholders and customers.
• Support new product introduction (NPI) by identifying potential failure modes during qualification.
• Manage lab equipment operation and maintenance, and ensure proper calibration and usage.
• Drive continuous improvement of failure analysis processes and methodologies.
• Formulate concise failure analysis reports and responsible in failure analysis results presentation to stakeholders

Qualifications:

• Requires a Bachelor Degree or Master in Engineering (Electrical &/or Electronics, Microelectronics, Physics, Material Sciences, Chemical)
• Good Understanding in Semiconductor fundamentals, process flow, transistor device physics and circuit design and analysis are highly valued.
• Familiar with failure mode and effects analysis (FMEA)
• Established in hands-on EFA skillsets to perform Electrical fault isolation using laser induced techniques, photon emission and thermal microscopy with good understanding on techniques strength and limitation
• Established in hands-on PFA skillsets to perform Physical Failure analysis methods including mechanical polishing/delayering, SEM inspection, FIB analysis and chemical etch procedures, for sample preparation and defect viewing
• Experience on operating lab electronic instruments, ie Parametric Analyzers, are highly valued.
• Works on improvement projects, take on tool ownership responsibilities and documentation of SOPs and specifications
• Motivated, Committed, Works well in teams, possess good communication skills

• Manage FA laboratory equipment to support daily operations and execute additional assigned tasks.
• Conduct comprehensive failure analysis, including electrical and physical evaluations, while contributing to the development of new analysis methodologies.

Requirements:

• Higher Nitec in Engineering or equivalent.
• At least 1 year of relevant working experience
• Procifient in MS Office

If you are keen to apply for the position, kindly email your detailed resume in MS Word to -

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at

EA Licence: 19C9701

Registration: R

Reporting to the Assistant Vice President, you will provide failure analysis and advisory services tar-geted at a wide range of industrial clients within the region.

Key Responsibilities

• Conduct engineering failure analysis (FA) and materials-related testing to identify root cause of failures.
• Liaise and communicate with industrial customers, providing consultation and advisory services.
• Prepare proposals, site surveys, laboratory analysis, reports, presentations.
• Render support in lab and quality management

Key Requirements

• Minimum a Degree in Materials Science, Mechanical Engineering, or related disciplines. PhD/Masters will be an advantage.
• At least 3 years of working experience
• Experience in FA, material testing in laboratory environment and consultation field preferred.
• Good knowledge and hands-on experience in major material analytical equipment such as SEM, EDX, XRD, metallurgy examination
• Possess strong communication and interpersonal skills
• Has an inquisitive mind for new knowledge in addition to having excellent analytical skills
• Ability to manage multiple projects as a team player as well as an individual contributor
• Familiar with ISO17025 quality management system

Company

Vysystems Singapore

Designation

Failure Analysis Technician

Date Listed

13 Oct 2025

Job Type

Entry Level / Junior Executive

Full/Perm

Job Period

Immediate Start, For At Least 1 Month

Profession

Engineering

Industry

Consultancy

Location Name

Singapore

Allowance / Remuneration

$1,800 - 2,550 monthly

Company Profile

Vy Systems is a Global Technology consulting, Solutions, and Managed Technology Services company. We service our customers with 'RESPONSIVENESS' as a key factor and we believe that timely response to any transaction increases the operational efficiency and accelerates the revenue and profitability to our customers.

The Company is founded and managed by a team of professionals having more than two+ decades of global experience in the business of Technology Consulting and Services.

Job Description

Responsibilities:

• Operate FA laboratory equipment to support daily lab operations and handle additional assigned tasks.
• Perform general failure analysis, including electrical and physical FA, and assist in developing new analysis techniques.
• Comfortable in handling chemicals using appropriate personal protective equipment (PPE).
• Preferred knowledge of mobile phones, computer hardware, and components.
• Test knowledge and background will be advantageous.
• Strong hands-on experience

Requirements:

1.Higher NITEC/Diploma in Engineering.

2.Ability to work independently and prioritize tasks to meet deadlines.

3.Positive attitude and strong work ethic.

4.Flexibility to work mid/weekend shifts and overtime if needed.

Application Instructions

Please apply for this position by submitting your text CV using InternSG.

Kindly note that only shortlisted candidates will be notified.

SSMC (Systems on Silicon Manufacturing Company Pte. Ltd.), is a Joint Venture between NXP and TSMC. We offer flexible and cost effective semiconductor fabrication solutions by maintaining fully equipped SMIF cleanroom environment, 100% equipment automation and proven wafer-manufacturing processes.

We're looking for innovative, passionate, and talented people like you to join our team.

We're searching for a Failure Analysis Engineer to be part of our Product & Testing Engineering department diverse team of talent. You will be responsible for electrical failure analysis (EFA) and physical failure analysis (PFA) in root cause finding for product yield improvement.

What you will be working on:

• Support EFA and PFA for customer returns, product qualification issue, reliability monitoring failure, specific customer request and fab issue
• Undertake failure analysis on low-yielding products, qualification failures and customer rejects
• Participate in cross-functional teams to provide analytical support
• Undertake role in managing and prioritizing FA requests
• Track section performance indices and undertake projects for continuous improvement
• Develop and establish new FA capabilities and techniques
• Liaise with external labs for advance FA techniques
• Responsible and accountable for quality and integrity of work and analysis
• Drive continuous improvement in quality, productivity, cost and safety of work processes and environment to achieve assigned section/department and/or company KPI
• Ensure compliance to QMS/ISMS related requirements
• Establish/Adhere to lab and fab safety and housekeeping protocols
• Ensure compliance to EHS related requirements

More About You:

• Bachelor's Degree in Engineering (Material Science or Electrical/Electronic), Physics or equivalent
• At least 2 year(s) of experience in semiconductor wafer fab failure analysis
• Basic engineering knowledge, which may include semiconductor pump and vacuum system and electrical wiring system
• Fundamental knowledge in semiconductor design layout and electronic circuits
• Proficient in Microsoft applications
• Good problem solving skills
• Good analytical skills
• Fresh graduates are welcomed

SSMC is firmly committed to upholding equal employment opportunities for all individuals. We strictly adhere to the Tripartite Guidelines on Fair Employment Practices (TGFEP), the Singapore Food Safety and Security Act 2025 (FSSA 2025), and the Singapore Code of Advertising Practice. All qualified applicants will receive non-discriminatory consideration for employment on the basis of merit and regardless of age, race, gender, religion, marital status and family responsibilities, or disability, or any other attributes as protected by the relevant laws.