3,654 Electrical jobs in Singapore

Responsibilities:

• Machine design in Electrical aspect
• Perform single line drawing
• BOM & machine manual writing
• Conduct machine acceptance with customer
• Coordination with sub-contractors for machine build

Requirements:

• Possess strong leadership quality and be self-motivated
• Experience in Machine AC & DC (Control) design
• Good knowledge and experience in machine automation
• Degree / Diploma in Electrical Engineering

Job Description:

• Prepare Statement of Work for electrical installation work on aircraft
• Generate design and fabrication documents for electrical installation work on aircraft:
• Sourcing of electrical parts (eg connectors, backshells, relays, wires)
• Design of electrical harness, RF and FO cables
• Generate electrical wiring diagrams
• Generate harness assembly drawings
• Generate aircraft harness routing diagrams
• Generate post installation test documents (eg continuity check, isolation checks, VSWR, insertion loss)
• Perform aircraft Electrical Power Load Analysis (ELA)
• Interface with other disciplines to ensure smooth project execution
• Present solutions to customers
• Support production floor to resolve any technical issues
• Support production floor in performing installation testing
• Generate updates for affected technical publications

Requirements:

• Min. Degree in Engineering – preferable in Electrical Engineering
• Proficient in Microsoft Words/ Excel/ Power Point
• Knowledge in Electrical Power and Circuitries
• Knowledge in MS Visio to generate electrical wiring diagrams and electrical wiring harness assembly drawings will be an added advantage
• Experience on CAD software for electrical wiring harness installation will be an added advantage
• Knowledge in Autocad Electrical, Adobe Illustrator, Visual Basic, MS Access and programming skills will be an added advantage,
• Good written and oral communication skills in English
• Must be a self-motivated team player who is able to work independently
• Must be a good team player
• Candidates with similar prior experience will be an added advantage
• Candidates with no prior experience are welcome to apply
• Singaporean only

Job Description:

• Prepare Statement of Work for electrical installation work on aircraft

• Generate design and fabrication documents for electrical installation work on aircraft:

• Sourcing of electrical parts (eg connectors, backshells, relays, wires)

• Design of electrical harness, RF and FO cables
• Generate electrical wiring diagrams
• Generate harness assembly drawings
• Generate aircraft harness routing diagrams

• Generate post installation test documents (eg continuity check, isolation checks, VSWR, insertion loss)

• Perform aircraft Electrical Power Load Analysis (ELA)

• Interface with other disciplines to ensure smooth project execution
• Present solutions to customers
• Support production floor to resolve any technical issues
• Support production floor in performing installation testing
• Generate updates for affected technical publications

Requirements:

• Min. Degree in Engineering in Electrical Engineering
• Proficient in Microsoft Words/ Excel/ Power Point
• Knowledge in Electrical Power and Circuitries
• Knowledge in MS Visio to generate electrical wiring diagrams and electrical wiring harness assembly drawings will be an added advantage
• Experience on CAD software for electrical wiring harness installation will be an added advantage
• Knowledge in Autocad Electrical, Adobe Illustrator, Visual Basic, MS Access and programming skills will be an added advantage,
• Good written and oral communication skills in English
• Must be a self-motivated team player who is able to work independently
• Must be a good team player
• Candidates with similar prior experience will be an added advantage
• Candidates with no prior experience are welcome to apply
• Singaporean only

• Attend User / Client meetings acting as technical lead in regard to project management as required.
• Conduct internal training to staff for pre-sales engagement and ensure knowledge transfer of design methodology, cost modelling, etc. to employees.
• Manage each phase of the project from design to completion and ensure efficient use of resources and enhance cost-effectiveness.
• Supporting new business venture overseas.
• Propose design concept.
• Summarize design requirement.
• Analyzing existing facility
• Conceptual sizing/design
• Risk analysis by checking consistency between tender and quotation specification.
• Prepare supplemental material (Spec, DWG) for quotation.
• Review BoQ (Material and quantity).
• Propose Value Engineering and technical review.
• Prepare presentation material for tender interview.
• Provide audit and consultancy services.
• Vigilant system support
• site survey
• draft proposal document
• provide technical support.

· Project Management for new construction and D&B project in design phase working directly with clients, consultants, statutory authorities, and contractors.

• Leading or facilitating the design review meetings and design workshops.
• Feasibility study.
• Assessment of mission critical building.
• Concept & schematic design
• Summarize design requirement.
• Analyzing existing facility
• Schematic design report
• Design development (Spec., technical calculation sheet)
• Propose new, feasible innovation and stay abreast on the latest trend in the market.
• Product differentiation
• Detail design
• Arrangement of shop drawing with drafter
• Authority submission arrangement with QP
• Input for T&C requirement (prepare test script and ensure that the methodology is in line internally)
• Design Coordination with other discipline.
• Review of construction material / shop drawing / MoS.
• Shop drawing coordination with sub-con/vendor & other stakeholders.
• Periodical inspection (internal check for quality improvement).
• Ensure site installation works are according to project plans / designs / time frame.
• T&C consultation for FAT, SAT, and IST with Technical & Q&C department.
• Handover submission arrangement with drafter team and project team (As build DWG).
• Required to learn and adapt working in Cloud, Design Collaboration and Model coordination and QA/QC own work.

· AutoCAD & Revit experience with Cloud Work-sharing (ACC) is desirable.

· Depending on project need, this position may be located On-Site or Off-Site and requires frequent travel to the project site.

· Any other duties assigned by Senior Manager.

Job Types: Full-time, Permanent

Pay: $3, $5,500.00 per month

Benefits:

• Health insurance

Experience:

• Electrical design: 1 year (Preferred)

Work Location: In person

• Electrical equipment supplier (MNC company)
• Basic $4000 - $5800
• AWS + Bonus + 14 days AL
• Mon-Fri
• Working location: Tuas
• Company transport provided: Boon Lay, Bukit Batok, Choa Chu Kang

Responsibilities

• Responsible for bigger projects of Design Department.
• Plan and design electrical switchboards, consoles and control panels according to customer's requirements.
• Prepare approval drawings, shop drawings, final drawings / documents, short circuit calculations, instruction manuals as required for submission to clients and shopfloor production.
• Co-ordinate with clients and consultants on the technical requirements. Attend technical discussions with clients and consultants when required.
• Check and approve design drawings and documents produced by subordinate staff under his/her charge.
• Prepare material requisition lists for job requirements.
• Check and follow-up on design and shop drawings with production departments.

Qualifications

• Min Diploma with at least 3 years' electrical design experience.
• Knowledge of switchboards/panels (marine or industrial) design is an advantage.
• Singaporeans only

For consideration, kindly submit your CV by clicking "APPLY Now"

**Only shortlisted candidate would be notified**

EA Reg. No: R | Chloe Tan

· Prepare electrical calculations, cost estimates, and technical curves for tender submissions.

· Analyze design requirements and ensure compliance with relevant standards.

· Collaborate with clients to gather requirements and provide technical support and specifications throughout the tender lifecycle.

· Work with suppliers and contractors to obtain quotes for special accessories and equipment.

· Prepares electrical design and winding Bill of Materials (BOM) for transformers manufacturing, including schematics and layout drawings.

· Conduct feasibility studies and simulations to optimize design performance.

· Support ac-hoc work such as site surveys, technical meetings and approval drawing preparation etc.

Qualifications & Experience:

· Minimum Bachelor's degree in Electrical and Electronic Engineering or an equivalent qualification, preferably with a major in electrical power engineering.

· Proficiency in programming languages such as C, C++, etc., is a plus.

Interested candidates please send in your resume to:

Topaz Liang Huimin (CEI No. R , email to:

EA License No: 99C4599

My clients are established M&E consultant firms in town area.

Job Descriptions

• Design Electrical power distribution, Lightings, Lightning Protection, ELV for building projects.
• Able to produce Schematic Drawings and Single Line Drawing. Layout drawings without much supervision
• Able to size cable tray, cable containment.

Job Requirement

• Degree / Dip in Electrical Engineering or equivalent.
• At least 1 years of relevant industry experience
• Relevant working experience in an M&E Consulting firm is and added advantage.
• Knowledge in design and building project and relevant code of practice.
• Proficiency in AutoCAD/ BIM software is a MUST
• Able to work as a team, assertive, independent and proactive.
• Mainly Commerical Projects .

1. Electrical Design Engineer (PLC) @Joo Koon

2. Project Management including scheduling, Budget control & other project related matters

3. Responsible for hardware and software (PLC) design for customized machine / total system
4. Supervise, test and commission projects in domestic and overseas
5. Project presentation & documentation
6. Work with third party engagement wherever necessary for project related matters

7. ITE/Diploma in Electrical / Mechatronic with 2 years relevant experience

8. Product Design Engineer (Electrical) @Bedok

9. Support project & installation on the reports, jobsite issues and solutions related to electrical design.

10. Involved in design interfacing, parts provision, reseach & design for cost savings or new products.
11. Optimize work efficiency i.e automation, create Drawings and Part List for equipment ordering system.
12. Assist design resolution for error investigation, formulate corrective & preventive measures.
13. Provide engineering support to marketing and sales team for new products.

14. Support maintenance works inquiry/spare parts Inquiry/order supports.

15. Degree in Electrical Engineering/Mechatronic. Entry level welcome to apply.

16. At least 3 years in electrical design work, and proficient in AutoCAD

Interested applicants, send in your updated resume by clicking "Apply Now".

Lin Weikang

EA Personnel No: R

EA License No: 23C1894

Job Responsibilities:

• Machine design in Electrical aspect
• Perform single line drawing
• BOM & machine manual writing
• Conduct machine acceptance with customer
• Coordination with sub-contractors for machine build
• Posses strong leadership quality and be self-motivated
• Experience in Machine AC & DC (Control) design
• Good knowledge and experience in machine automation

Requirements:

• Min. 3 years experience in Automation, Semiconductor, or Precision Engineering industry.
• Min. Diploma/Degree in Electrical Engineering.

HOW TO APPLY:

Interested applicants, kindly send your resume in MS WORD format to please click on "Apply Now" and provide the below details in your resume.

We regret only shortlisted candidates will be notified.

Important Note: Trust Recruit Pte Ltd is committed to safeguarding your personal data in accordance with the Personal Data Protection Act (PDPA).

Please read our privacy statement on our corporate website

Trust Recruit Pte Ltd

EA License No: 19C9950

EA Personnel: Lee Jia Chian (Jayleen)

EA Personnel Reg No: R