1,626 Electrical Engineering Roles jobs in Singapore
Electronics Engineer
Posted today
Job Viewed
Job Description
Responsibilities:
- Perform electronics hardware and software design including analog, digital, sensing technology, motor control, power electronics and embedded firmware
- Layout of schematic and PCB layout
- Document engineering details including firmware coding, design notes, FMEA and technical review documents.
- Collaborate with counterparts on product development progress, from design, development of electronics parts to final production.
- Implement design solutions to meet product specification and ensure reliability.
- Work closely with procurement team in component sourcing, product costing and value analysis to support development effort.
- Work closely with marketing and development team to define product requirements.
Requirements:
- Degree or Diploma in Electronic Engineering or equivalent, with at least 2 years' relevant working experience.
- Familiar with global regulatory standards to ensure specifications and requirements compliance.
- Good knowledge and experience in embedded design implementation, RTOS, test verification, product validation, production testing, MCU architecture and common peripherals.
- Strong knowledge in using PADS and programming language (C, C++ and assembly).
- An innovative team player with strong analytical skill.
- Candidates with 5 years and above experience may be considered for Senior role.
Electronics Engineer
Posted today
Job Viewed
Job Description
You'll own end-to-end embedded hardware development: schematic capture, PCB layout, prototype bring-up and test, and handoff to manufacturing. Work includes analog & digital circuit design (power management, sensors, interfaces), creating fabrication/assembly outputs, bench-level debugging (oscilloscope, logic analyzer, spectrum analyzer), and producing concise design and test documentation. You'll collaborate closely with mechanical, and manufacturing partners to drive DFM/DFT and iterate prototypes into production.
Requirements:
- B.S. in Electrical / Computer Engineering or equivalent hands-on experience.
- At least 3 years designing embedded electronics (analog + digital).
- Strong KiCAD skills: schematic capture, PCB layout, library management, Gerber/assembly outputs.
- Solid understanding of EMI/EMC mitigation, signal & power integrity, and decoupling strategies.
- Practical debugging experience with lab equipment and bring-up of prototypes.
- Excellent written communication and ability to produce clear handoff documentation.
- Singapore citizen or permanent resident only.
Plus:
- Proficiency with Git and CI/CD for firmware and EDA pipelines.
- Python for EDA automation / programmatic schematic generation (e.g., SKiDL / KiCAD Python API).
- Firmware development (C/C++), low-level drivers, RTOS experience.
- Experience with DFx, supplier handoffs, production testing, or wearable/small-form-factor designs.
Electronics Engineer
Posted today
Job Viewed
Job Description
RESPONSIBILITIES:
- Design and development of electronics projects (power supply circuits, digital circuits: MCU/ microprocessor, I/Os and wireless technologies: 3G,4G/BT/Wi-Fi/GNSS/etc)
Involve from design concept, design verification testing, troubleshooting, regulatory certification until production
REQUIREMENTS:
- Experience in designing with multi-core ARM architecture, DDR3 memory, 3G/4G circuits, Bluetooth, Wi-Fi, GNSS and power supply circuitry
- At least a Bachelor's degree in Electronics Engineering
- Experience and knowledge in SMPS, microcontrollers and product regulatory requirements (EMC)
Must be driven, able to work independently and in a team environment, and able to communicate clearly
Interested candidates are to submit a detailed resume to speed up the application process.
Only shortlisted candidates will be notified. Thank you for applying.
Electronics Engineer
Posted today
Job Viewed
Job Description
We are looking for a highly skilled and innovative Electronics Engineer (Power Converter) to join our R&D team. The ideal candidate will be responsible for the design and development of advanced power electronic converters , component evaluation, and ensuring compliance with global regulatory standards.
Key Responsibilities:- Design and develop various power electronic converters , including but not limited to:
AC/DC : Totem-pole PFC, T-type, Vienna Rectifier
DC/DC : LLC, Buck, Boost, Synchronous Rectification (SR), Flyback
- Perform circuit simulations , hardware prototyping, and performance validation.
- Select and evaluate power components such as MOSFETs (Si, SiC, GaN), capacitors, resistors, and other critical components.
- Conduct thermal, EMI/EMC, and reliability analyses of power converter designs.
- Collaborate with cross-functional teams including mechanical, firmware, and manufacturing to ensure robust product integration.
- Ensure product designs meet international safety and regulatory standards
- Create design documentation including schematics, BOMs, test reports, and validation plans.
- Stay updated with emerging trends in power electronics and implement best design practices.
- Bachelor's, Master's, or PhD degree in Electrical/Electronics Engineering
- From 2 to 5 years of industry experience in designing and developing power electronic converters .
- Solid understanding of power converter topologies and modern semiconductor technologies (Si, SiC, GaN).
- Proficient in circuit simulation and PCB design tools (e.g., LTspice, PLECS, Altium Designer, or similar).
- Familiar with safety and regulatory standards such as UL, IEC, ISO, and EMI/EMC compliance.
- Strong analytical and problem-solving skills, with a hands-on approach to prototyping and testing.
- Good communication skills and ability to work collaboratively in a multidisciplinary team.
If interested, please submit your application to with your expected salary and resume.
We regret that only short-listed candidates will be contacted shortly. By submitting your application or resume, you agree to the collection, use, retention, and sharing of your personal information with potential employers for their assessment.
JDA WMS Pte Ltd | EA Personnel: Pham Thi Tuyet Mai
EA License No: 23S1595 | EA Registration No: R
Electronics Engineer
Posted today
Job Viewed
Job Description
Lico Resources is working with a global equipment manufacturer recognized for its advanced R&D capabilities and commitment to engineering innovation.
This is an exciting opportunity for an experienced Electronics Engineer to join a high-performing R&D team driving the design and development of next-generation electronic systems for advanced manufacturing equipment. The role offers a dynamic and collaborative environment where you'll contribute to critical technology innovations that shape the semiconductor industry.
**Key Responsibilities:**
- Lead the design, development, and validation of electronic hardware systems used in precision manufacturing tools
- Develop schematic diagrams and PCB layouts using industry-standard EDA tools
- Integrate and test analog, digital, and power electronic circuits to ensure optimal performance and reliability
- Work closely with multidisciplinary teams—including firmware, mechanical, and software engineers—to deliver end-to-end solutions
- Conduct hands-on debugging, troubleshooting, and performance tuning of circuit assemblies
- Evaluate component selection, BOM cost, and system compatibility for manufacturability
- Ensure designs meet relevant safety and compliance standards
Participate in design reviews, risk assessments, and documentation processes to support product lifecycle
**Qualifications:**
**Must-Have:**
Bachelor's degree in Electronics, Electrical Engineering, or a related discipline
Minimum 3 years of experience in hardware circuit design and PCB development
Proficiency in PCB design software such as Altium Designer, OrCAD, or Eagle
Strong foundation in analog and digital circuit design, including power supply and signal conditioning
Familiarity with design practices for EMI/EMC and safety compliance
**Preferred:**
Experience working with microcontrollers, FPGAs, and embedded systems
Knowledge of thermal management, board bring-up, and reliability testing
Effective communication skills and ability to thrive in cross-functional team environments
Analytical mindset with strong problem-solving capabilities
If you are interested in this role, please send us your updated resume today to quoting reference number **A08521**. Please note that only shortlisted candidates will be notified.
"Data provided is for recruitment purposes only."
Job Reference No: **A08521**
EA Licence No.: 13C6733
EA Registration No.: R
Electronics Engineer
Posted today
Job Viewed
Job Description
A Young Company which is the leader in first-person-view drone technology. Our products are used in the fastest and highest performing drone, giving our customers the sensation of flight through virtual reality headsets.
For our fast-growing drone business, we are looking for electronic engineers to spearhead new futuristic products. Your tasks will include developing new PCB schematics, layouts, selecting components and initiating PCBA. You will be working with expert engineers of the industry throughout the product life-cycle.
Responsibilities:
- Hardware schematic and layout design
- Plan and execute hardware test list and undergo design verification
- Design and standardize testing procedures
- Responsible on HW and/or SW part of the project, from idea, sample phase, until mass production
- Proper and full documentations throughout the entire R&D development stages
- Provide full technical support to production team during mass production
- Helps to develop next generation ideas and solutions to meet client needs
Requirements:
- Familiar with Altium Designer
- Experience in MCU/embedded system, e.g. STM32, ESP32, ARM architect
- Experience in circuit camera solution, image sensor (CCD, CMOS), video processor (CVBS, S-video, MIPI, LVDS, H.264)
- Experience in RF circuit, design, testing and validation
- Experience in analog video system and high power transmission
- Experience in analog/digital/power circuit design
- Experience in LORA, power amplifier and antenna matching
- Experience in Bluetooth and WiFi (module) is a plus
- Experience in optics is a plus.
- Solid experience on prototype developing and hands on experience in soldering
- Good communication & documentation skills
- Good in English, Cantonese or Mandarin
We offer excellent opportunities for career development in addition to a competitive salary and fringe benefits to the right candidates.
Electronics Engineer
Posted today
Job Viewed
Job Description
We are looking for a talented Electronics engineer to join our team.
Thank you for your interest in joining our team here at mēkā. While we started out in 3D Printing, we've grown from our roots in the maker movement to take on more of a role in industry.
Ultimately, we strive to build our own great products that changes the world for the better.
We need people who are looking to work hard and push boundaries.
One of the most important attributes we look for in a colleague is curiosity. You must look at the world with a curious eye and look for problems to solve. And you must try to go solve them, even if they are out of reach. You must be willing to learn, fail and try again. A lot of our work is centered around exploration and a curious mind is a must. You must be comfortable working with familiarizing yourself with foreign concepts that are very far out of your comfort zones.
Your responsibilities include:
- Work closely with design team to bring ideas to life
- Plan, design and develop products within quality target and costs
- Sourcing and procurement of components and manufacturers
- Prototyping with Arduino/ESP32 and others
- Design of PCB/PCBA
- Assembly and testing of prototype/product - electronics
- On-site installation and commissioning
You need to be well-versed in the electronics world. Mechanical knowledge would be an added advantage.
You must have working knowledge of Autodesk Fusion 360.
Be The First To Know
About the latest Electrical engineering roles Jobs in Singapore !
Electronics Engineer
Posted today
Job Viewed
Job Description
Electronics Engineer
Role Overview:
We are seeking a highly motivated Electronics Engineer to join our dynamic R&D team, focusing on the development of innovative Internet of Things (IoT) products. This role involves full-cycle hardware design—from schematic development and PCB layout to product prototyping, testing, and refinement. You will collaborate closely with cross-functional teams to create reliable, cost-effective, and market-ready electronic solutions for smart connectivity applications.
Key Responsibilities:
- Design and develop hardware for IoT devices, including schematic diagrams, PCB layouts, and system architecture definitions.
- Lead the selection and validation of electronic components, including preparation of Bills of Materials (BOM) and cost analysis.
- Collaborate with firmware, mechanical, and product teams to ensure cohesive system development and timely project execution.
- Develop and implement testing protocols for hardware validation, including functional tests, stress tests, and compliance assessments.
- Ensure product designs meet relevant safety, EMC/EMI, and regulatory standards.
- Support the prototyping, debugging, and refinement of electronic systems during development stages.
- Contribute to continuous improvement initiatives in design practices, documentation, and project delivery processes.
Required Qualifications & Experience:
- Bachelor's degree or higher in Electronic Engineering, Communication Engineering, or a related field.
- Proven experience in hardware design for IoT or embedded systems.
- Strong proficiency in analog and digital circuit design, including power management (AC/DC, DC/DC converters), battery charging circuits, and communication interfaces (I2C, SPI, DDR).
- Hands-on experience with communication technologies such as ZigBee, Bluetooth, Z-Wave, LoRa, and Wi-Fi.
- Familiarity with regulatory requirements and testing procedures, including EMI, EMC, and safety certifications.
- Practical experience in PCB layout design tools and hardware debugging.
- Strong understanding of sensor technologies (e.g., PIR, microwave, ultrasonic, PM2.5) is an advantage.
- Knowledge of microcontroller programming (C/C++ or assembly) is beneficial.
Electronics Engineer
Posted today
Job Viewed
Job Description
A Young Company which is the leader in first-person-view drone technology. Our products are used in the fastest and highest performing drone, giving our customers the sensation of flight through virtual reality headsets.
For our fast-growing drone business, we are looking for electronic engineers to spearhead new futuristic products. Your tasks will include developing new PCB schematics, layouts, selecting components and initiating PCBA. You will be working with expert engineers of the industry throughout the product life-cycle.
Responsibilities
Hardware schematic and layout design
Plan and execute hardware test list and undergo design verification
Design and standardize testing procedures
Responsible on HW and/or SW part of the project, from idea, sample phase, until mass production
Proper and full documentations throughout the entire R&D development stages
Provide full technical support to production team during mass production
Helps to develop next generation ideas and solutions to meet client needs
Requirements
Familiar with Altium Designer
Experience in MCU/embedded system, e.g. STM32, ESP32, ARM architect
Experience in circuit camera solution, image sensor (CCD, CMOS), video processor (CVBS, S-video, MIPI, LVDS, H.264)
Experience in RF circuit, design, testing and validation
Experience in analog video system and high power transmission
Experience in LORA, power amplifier and antenna matching
Experience in Bluetooth and WiFi (module) is a plus
Experience in optics is a plus.
Solid experience on prototype developing and hands on experience in soldering
Good in English, Cantonese or Mandarin to effectively communicate with Mandarin/Cantonese-speaking clients.
We offer excellent opportunities for career development in addition to a competitive salary and fringe benefits to the right candidates.
#J-18808-Ljbffr
Electronics Engineer
Posted today
Job Viewed
Job Description
We are seeking a highly motivated Electronics Engineer to join our dynamic R&D team, focusing on the development of innovative Internet of Things (IoT) products. This role will be invloved in the full design cycle — from schematic development and PCB layout to product prototyping, testing, and refinement. You will collaborate closely with cross-functional teams to create reliable, cost-effective, and market-ready electronic solutions for smart connectivity applications.
Key Responsibilities
Design and develop hardware for IoT devices, including schematic diagrams, PCB layouts, and system architecture definitions.
Lead the selection and validation of electronic components, including preparation of Bills of Materials (BOM) and cost analysis.
Collaborate with firmware, mechanical, and product teams to ensure cohesive system development and timely project execution.
Develop and implement testing protocols for hardware validation, including functional tests, stress tests, and compliance assessments.
Ensure product designs meet relevant safety, EMC/EMI, and regulatory standards.
Support the prototyping, debugging, and refinement of electronic systems during development stages.
Contribute to continuous improvement initiatives in design practices, documentation, and project delivery processes.
Required Qualifications & Experience
Bachelor’s degree or higher in Electronic Engineering, Communication Engineering, or a related field.
Proven experience in hardware design for IoT or embedded systems.
Strong proficiency in analog and digital circuit design, including power management (AC/DC, DC/DC converters), battery charging circuits, and communication interfaces (I2C, SPI, DDR).
Hands‐on experience with communication technologies such as ZigBee, Bluetooth, Z‐Wave, LoRa, and Wi‐Fi.
Familiarity with regulatory requirements and testing procedures, including EMI, EMC, and safety certifications.
Practical experience in PCB layout design tools and hardware debugging.
Strong understanding of sensor technologies (e.g., PIR, microwave, ultrasonic, PM2.5) is an advantage.
Knowledge of microcontroller programming (C/C++ or assembly) is beneficial.
#J-18808-Ljbffr