904 Quality Inspector jobs in Singapore

• Inspect aircraft spares
• Verify aircraft spares to ensure appropriate accompanying documents from the OEMs, vendors and suppliers
• Work on continuous improvement projects to improve work areas & procedures
• Facilitate periodic audits from civil aviation authorities & customers
• Maintain Shelf Life records for aircraft spares with limited life
• Monitor and conduct surveillance audits on all stores activities within the Bonded Stores
• Raise Discrepancy Reports for any discrepancies found on any aircraft spares in the Bonded Stores

• Work experience in the aviation industry would be an advantage
• Excellent interpersonal & influencing skills
• Proficient in Microsoft Office & presentation skills

• Inspect aircraft spares
• Verify aircraft spares to ensure appropriate accompanying documents from the OEMs, vendors and suppliers
• Work on continuous improvement projects to improve work areas & procedures
• Facilitate periodic audits from civil aviation authorities & customers
• Maintain Shelf Life records for aircraft spares with limited life
• Monitor and conduct surveillance audits on all stores activities within the Bonded Stores
• Raise Discrepancy Reports for any discrepancies found on any aircraft spares in the Bonded Stores

• Work experience in the aviation industry would be an advantage
• Excellent interpersonal & influencing skills
• Proficient in Microsoft Office & presentation skills

• Perform inspection support including first process, in process and final outgoing inspection (ie. attend to quality related issues material, found during normal production.)
• Understand indepth of each customer's order (eg. End product application) and recording all knowledge-base information into company shared drive for future references
• Decision making ability on accepting or rejecting material before sending to customers
• Perform final check on finished parts, documentation, inspection sheet ensuring full compliance to customers' requirements
• To raise Non-Conformance or Incident Reports on discrepancy discovered
• Perform analysis of rejected materials and prepare monthly reports for product quality performance
• Maintain quality tracker and attend to claims due to quality issues from customers and to suppliers
• Share with the team for the quality matters and observation on a daily basis
• Regulate the stock quantities accurately at all times for quality replacements or rejections
• Monitor suppliers' quality performance under weekly basis and work together with Purchasing dept to clear all non-conformance within certain timeline
• Ensure current quality standards and systems are maintained and are regularly reviewed and challenged
• Requirements
• Min Degree in any Engineering related discipline
• Basic understanding of the ISO Quality Management System
• Quality process based internal audit trained (preferred)

•  Combination of office and on-site work.
• Working overtime may be required, and working at a faster pace.
• ight shift may be requested.

• Degree or Advanced Diploma in Civil Engineering.
• At least 3 years of relevant experience in civil quality control inspection in Singapore for civil construction projects.
• Strong knowledge of construction materials, techniques, and standards (BS EN, SS, ASTM).
• Excellent quality-problem-solving and analytical skills.
• Strong communication and reporting skills.
• Experience in CONQUAS process is a plus.
• The job is Physically demanding

• Perform inspection support including first process, in process and final outgoing inspection (ie. attend to quality related issues material, found during normal production.)
• Understand indepth of each customer's order (eg. End product application) and recording all knowledge-base information into company shared drive for future references
• Decision making ability on accepting or rejecting material before sending to customers
• Perform final check on finished parts, documentation, inspection sheet ensuring full compliance to customers' requirements
• To raise Non-Conformance or Incident Reports on discrepancy discovered
• Perform analysis of rejected materials and prepare monthly reports for product quality performance
• Maintain quality tracker and attend to claims due to quality issues from customers and to suppliers
• Share with the team for the quality matters and observation on a daily basis
• Regulate the stock quantities accurately at all times for quality replacements or rejections
• Monitor suppliers' quality performance under weekly basis and work together with Purchasing dept to clear all non-conformance within certain timeline
• Ensure current quality standards and systems are maintained and are regularly reviewed and challenged
• Requirements
• Min Degree in any Engineering related discipline
• Basic understanding of the ISO Quality Management System
• Quality process based internal audit trained (preferred)

Job Objectives

To ensure complete accuracy of all incoming products upon receipt and outgoing to customer for both Red & Blue Channel in accordance with Satair's Company Management System. Such accuracy, in alignment with Satair's quality objectives, shall pertain to documentation, part numbers, specification, description, quantity and quality of products.

• Perform incoming inspection to ensure that aviation products, parts and appliances received meet the applicable requirements.
• Perform outgoing inspection to ensure that the design status is still current prior to issue of an EASA Form 1 to declare the airworthiness of new aviation products, parts and appliances.

Job Responsibilities

• Ensure correct shipment from forwarder prior acceptance.
• Unpack the delivered items for inbound inspection
• Perform incoming and outgoing inspection to ensure that aviation products, parts and appliances meet the applicable design specification
• Ensure all certificates and deliveries documentation are in order
• Ensure proper record of technical inspections performed in the production orders and the relevant IT system (SAP)
• Issue certificates of conformity and/or EASA Form 1, where applicable
• Document shipment discrepancy in the applicable Claim Database and follow up with relevant stakeholders to resolve the discrepancy.
• Ensure non-conforming material are managed according to company procedures.
• Perform periodic inspection managed according to company procedures.
• Manage a shelf life monitoring program according to company procedures.
• Perform inspection on customer return goods according to company procedures
• Perform goods return to supplier according to company procedures
• Perform scrapping of parts according to company procedures
• Provide support on the management of the supplier discrepancy and customer claim handling and investigation
• Report any Suspected Unapproved Parts to the Manager
• Handle quality escape notifications and perform required actions
• Maintain tidy conditions in own working area and any other areas for which the individual is responsible
• Able to work 24 hours shift work
• Any other tasks any assigned by the Manager

Secondary Responsibilities

• Assist the Manager to implement and manage an independent quality and safety system with its administration to ensure that the activities carried out can be monitored for compliance with the relevant CAAs, ISO9001, AS9110 & AS9120 requirements and relevant procedures and instructions that are called out by company procedures
• Work in backup capacity within the team by arrangement with the Manager – Quality
• Provide support and guidance to the Warehouse and Shipping team on the incoming and outgoing quality related process
• Perform pick, pack and process shipment orders through the point of picking to dispatch with appropriate paperwork, when necessary.
• Report any deterioration in Quality performance and recommend mitigation actions
• Promote quality awareness throughout the organization
• Assist the Manager to manage a system to monitor, investigate and evaluate customer's complaints and warranties issues in the operations
• Assist in the development of new processes together with the appropriate departments

Job Requirements

• Minimum Singapore-Cambridge General Certificate of Education N level or equivalent with technical training preferred, preferably with a minimum Diploma in Aeronautical, Mechanical or Electrical Engineering
• A minimum of 12 months of experience in an Airbus Production environment or an equivalent level from a different production/repair organization confirmed by POA Compliance Team is required
• Technically knowledgeable and capable of grasping detailed engineering and quality concepts
• Ability to understand and read blueprints, schematics & Component Maintenance Manuals
• Be able to communicate in English, both verbally and in writing and ability to read and understand the applicable procedural documentation and regulation
• Good team player with excellent interpersonal and communication skills, able to multi-task effectively
• Strong analytical/Critical thinking/Problem-solving skills
• Ability to work under pressure and a high level of integrity and passionate in problem solving and drive for results
• Effective time management
• Must exhibit a high level of motivation, sense of urgency, attention to detail, energetic approach to job duties and requirements
• Inter-cultural understanding
• Honest, dependable, loyal and self-reliance
• Good written, verbal communication and presentation skill
• Attitude supportive of Satair values
• Preferably with minimun 18 months of aviation experience with at least 6 months in quality assurance function
• Knowledge of airworthiness authorities' regulatory requirements and AS9100 series standard requirements is an added advantage
• Ability to analyze inspection findings, and determine best case analysis advantage
• PC literacy, including google word, spreadsheets & slides
• Knowledge of SAP

Key Responsibilities:

• Assess and verify aircraft engine parts for conformity to airworthiness criteria and technical specifications.
• Utilize appropriate tools, equipment, and methods to conduct thorough inspections of engine components, modules, and accessories.
• Implement inspection techniques, analyze data, and apply lifecycle principles and risk-based approaches to support the inspection process.
• Carry out detailed visual and dimensional checks, identifying issues and recommending necessary repairs.
• Perform in-process evaluations to ensure components maintain proper condition and precise measurements.
• Communicate any discrepancies and document all inspection procedures and outcomes.
• Conduct final checks on engine parts to confirm repairs and modifications meet all required standards and technical guidelines.

Qualifications:

• Engineering or Aerospace certification required.
• 2 to 5 years of experience in inspecting aero engine components.
• Expertise in spotting and interpreting defects that could impact safety or quality.
• Proficient in using measurement tools such as micrometers, vernier calipers, and gauges.
• Strong understanding of inspection standards, methods, and lifecycle principles.

Why Join Us?

• Contribute directly to the safety and reliability of the aviation industry.
• Work with state-of-the-art technology and equipment in a dynamic environment.
• Grow your career with numerous advancement opportunities.
• Be part of a team dedicated to excellence and innovation in aerospace engineering.

Interested applicants may send their resume to or click APPLY NOW

Talentvis Singapore Pte Ltd | EA License No: 04C3537

EA Personnel Name: Ong Hui Shan (Gwen) | R1767800

Job Summary:

Quality control inspectors make sure that products meet standards of quality and safety. Responsible for performing inspections, checks and tests for quality control for the manufacture of products.

Essential Duties and Responsibilities:

• Performs mechanical inspection to ensure all quality aspects of the job are met exactly.
• Raw materials, components, fabricated/manufactured parts & assemblies
• First Piece/First Article, Receiving/incoming inspection, in-process, final inspection
• Measures piece parts /components and/or assemblies
• Generates detail inspection and nonconformance reports as necessary.
  • Inspection includes but is not limited to:
• Checks documents for accuracy and compliance to requirements
• Read and interpret information from engineering drawings, travelers, specifications and other documents to generate a complete and precise inspection report/record.
• Inspection(s) are internal
• Interfaces and provides support to other departments, suppliers and customers on quality related issues as necessary
• Requires ability to maintain a clean and safe work environment
• Attain positive results and communication through team effort
• Strong organizational, problem solving and analytical skills, strong attention to detail.
• Performs other duties as assigned.

Knowledge, Skills and Abilities:

• Strong written and verbal communication skills
• Good working knowledge of MS Office applications and database software
• Basic math abilities
• Must be able to read and apply production instructions, drawings, BOM schematics, and specifications in a proficient level
• Proficient in GD&T (Geometric Dimensioning and Tolerance)
• Able to read and interpret specifications, standards and engineering drawings/Blue Prints.
• Proficient in mechanical measurement techniques and workmanship standards related to machining and secondary processes such as: paint, power coat, plating, etc.
• Proficient with weld symbols, call-outs, wiring and/or crimping requirements.
• Experience in Precision sheet metal
• Proficiency using hand held tools (micrometers, calipers, Optical Comparator and other measuring and test equipment.
• Able to proficiently operate CMM's and perform basic "CMM" measurements
• 2-5 years working in machine shop, assembly clean rooms. Semiconductor and/or similar industry

Educational/Certification Requirement:

• High School Diploma/equivalent
• Some technician coursework/AA degree preferred, welding and/or system integration in a high mix, low volume semiconductor manufacturing environment is a plus
• ASQ (American Standard of Quality) certification preferred

Industry: Freight Forwarding / Logistics

MNC Environment

Permanent role (AWS Guaranteed + Variable Bonusn + Overtime)

Responsibilities:

• Inspect aircraft spares
• Verify aircraft spares to ensure appropriate accompanying documents from the OEMs, vendors and suppliers
• Work on continuous improvement projects to improve work areas & procedures
• Facilitate periodic audits from civil aviation authorities & customers
• Maintain Shelf Life records for aircraft spares with limited life
• Monitor and conduct surveillance audits on all stores activities within the Bonded Stores
• Raise Discrepancy Reports for any discrepancies found on any aircraft spares in the Bonded Stores

Requirements:

• Work experience in the aviation industry would be an advantage
• Excellent interpersonal & influencing skills
• Proficient in Microsoft Office & presentation skills

Job ID: QX96WW7Y

All Successful candidates can expect a very competitive remuneration package and a comprehensive range of benefits.

Kindly email your resume in a detailed Word format to

We regret that only shortlisted candidates will be notified

People Profilers Pte Ltd

20 Cecil Street, #08-09 PLUS Building Singapore 049705

+65 6950 9747

EA Licence Number: 02C4944

Registration Number: R1100011

EA Personnel: Carlo Antonio Dela Cruz

People Profilers Pte Ltd ("People Profilers") has entered into a Partnership Recruitment Collaboration with Employment and Employability Institute Pte Ltd ("e2i"), to extend the support of hiring beyond e2i's resources to broaden the reach of jobseekers.

This is in partnership with the Employment and Employability Institute Pte Ltd ("e2i").

e2i is the empowering network for workers and employers seeking employment and employability solutions. e2i serves as a bridge between workers and employers, connecting with workers to offer job security through job-matching, career guidance and skills upgrading services, and partnering employers to address their manpower needs through recruitment, training, and job redesign solutions. e2i is a tripartite initiative of the National Trades Union Congress set up to support nation-wide manpower and skills upgrading initiatives. By applying for this role, you consent to People Profilers's PDPA and e2i's PDPA ( ).