351 Aircraft Maintenance jobs in Singapore

1) Cabin Technician

2) Aircraft & Component Technician

3) Sheetmetal Technician

4) Engine Technician

5) Ground Support Equipment Operator

CABIN AIRCRAFT TECHNICIAN

• To carry out inspection, repair, work on passenger and crew seats, galleys, toilets, aircraft cabin equipment and all fixtures & fittings items associated with the aircraft cabin interior in accordance with the approved company procedures and as per airworthiness and regulatory requirements.
• To remove and replace aircraft parts relating to the Aircraft Cabin to ensure high standards of maintenance of aircraft cabin and furnishings and to ensure the highest standards of passenger safety and comfort.
• Complete and maintain manuals and technical documents pertaining to the repair and maintenance work carried out on the cabin interior.
• Responsible for the cleanliness and tidiness of the working area.
• Monitor, maintain and control the movements of all spares and materials, to ensure their proper usage and deployment, including the returning to stores of all the un-used spares and materials at the end of each shift.
• To perform cabin configuration changes on fleet as per the operational requirements.
• To ensure cabin safety aspects are maintained during cabin maintenance and pay particular attention to Emergency equipment.
• To assist aircraft engineers & technician with regard to daily maintenance activities on the aircraft as assigned by Maintenance Supervisor.
• Any other ad-hoc duties assigned by the Supervisor.

Requirements:

• Minimum NITEC/Diploma qualifications in Aerospace Engineering/ Aerospace Electronics/ Aerospace Avionic Engineering/ Aeronautical Engineering.
• At least 2 years of Cabin Maintenance working experience in Aviation industry, excluding OJT/Helper.
• Exposure on wide bodied airframes, Boeing and Airbus commercial aircrafts.
• Able to commit rotating shifts, if applicable.

A&C AIRCRAFT TECHNICIAN

• Perform C and D aircraft heavy maintenance tasks as directed by a Certifying Licensed Engineer/Duty Supervisor.
• Perform other tasks that may reasonably be requested by the Licensed Aircraft Engineer/Duty Supervisor.
• To carry out routine aircraft servicing tasks as required in accordance with maintenance manual procedures, observing all safety procedures and manufacturers/company regulations. Depending on the discipline this may include conducting general visual inspections and fluid replenishment system servicing, refuelling etc.To effectively use any specialized tooling or test equipment that may be required as part of the checking, testing, replacement or servicing of a system or component.
• The ability to understand the need for such equipment's as references in the aircraft manufacturer's manuals is essential.
• The ability to communicate at various levels, and to coordinate with other areas over technical issues, to ensure that all relevant parties are aware of the aircraft's serviceability status.
• To ensure the maintenance of tools and equipment in the relevant work place and conducting safe working practices at all times.
• Any other ad-hoc duties assigned by the Supervisor.

Requirements:

• Minimum NITEC/Diploma qualifications in Aerospace Engineering/ Aerospace Electronics/ Aerospace Avionics Engineering/ Aeronautical Engineering.
• At least 2 years of A&C maintenance working experience in Aviation industry, excluding OJT/Helper.
• Exposure on wide bodied airframes, Boeing and Airbus commercial aircrafts.
• Able to commit rotating shifts, if applicable.

SHEETMETAL AIRCRAFT TECHNICIAN

• To perform Structural Repair as per OEM approved Structural Repair Manual and Repair Disposition.
• To assist Aircraft License Engineer and Supervisory Lead to perform damage/repair assessment.
• To perform part forming such as skin doubler, stiffener and bracket for structural repair proposes in-accordance to OEM approved manual or drawing.
• To perform basic airframe/cabin task as required to facilitate access removal for structural repair.
• Required excellent tool maintenance and housekeeping practices.
• Any other ad-hoc duties assigned by the Supervisor.

Requirements:

• Minimum NITEC/Diploma qualifications in Aerospace Engineering/ Aerospace Electronics/ Aerospace Avionics Engineering/ Aeronautical Engineering.
• At least 5 years of Sheetmetal working experience in Aviation industry, excluding OJT/Helper.
• Exposure on wide bodied airframes, Boeing and Airbus commercial aircrafts.
• Familiar on basic structural repair tooling and practices.
• Must be able to work in confine space such as Fuel Tank if needed.
• Capable to interpret OEM Approved Engineering Drawing, Aircraft/Component Maintenance Manual and Structural Repair Manual.
• Able to commit rotating shifts, if applicable.

ENGINE OVERHAUL AIRCRAFT TECHNICIAN

• Perform disassembly/ assembly of engine/ module for repair and overhaul.
• Perform Boroscope inspection
• Install engine components onto the engine/ module.
• Perform troubleshooting, modification and maintenance works

Requirements:

• Minimum NITEC/Diploma qualifications in Aerospace Engineering/ Aerospace Electronics/ Aerospace Avionics Engineering/ Aeronautical Engineering.
• At least 2 years of Engine Overhaul working experience in Aviation industry, excluding OJT/Helper.
• Able to commit rotating shifts, if applicable.

GROUND SUPPORT EQUIPMENT OPERATOR

• To carry out preventive and corrective maintenance of the GSE
• To ensure equipment decals are visible. Replace if necessary
• Delivery of GSE to and from hangar
• Carry out inspection of GSE around airport bays
• Repositioning of maintenance steps from bays when required
• To ensure all metal structures of GSE are corrosion free by removal of corroded surface and using of corrosion protection agent
• To lubricate all movable joints

Requirements:

• NITEC in Mechanical / Electrical / Mechatronic engineering
• Class 3 or 4T preferred

1) Cabin Technician

2) Aircraft & Component Technician

3) Sheetmetal Technician

4) Engine Technician

5) Ground Support Equipment Operator

CABIN AIRCRAFT TECHNICIAN

• To carry out inspection, repair, work on passenger and crew seats, galleys, toilets, aircraft cabin equipment and all fixtures & fittings items associated with the aircraft cabin interior in accordance with the approved company procedures and as per airworthiness and regulatory requirements.
• To remove and replace aircraft parts relating to the Aircraft Cabin to ensure high standards of maintenance of aircraft cabin and furnishings and to ensure the highest standards of passenger safety and comfort.
• Complete and maintain manuals and technical documents pertaining to the repair and maintenance work carried out on the cabin interior.
• Responsible for the cleanliness and tidiness of the working area.
• Monitor, maintain and control the movements of all spares and materials, to ensure their proper usage and deployment, including the returning to stores of all the un-used spares and materials at the end of each shift.
• To perform cabin configuration changes on fleet as per the operational requirements.
• To ensure cabin safety aspects are maintained during cabin maintenance and pay particular attention to Emergency equipment.
• To assist aircraft engineers & technician with regard to daily maintenance activities on the aircraft as assigned by Maintenance Supervisor.
• Any other ad-hoc duties assigned by the Supervisor.

Requirements:

• Minimum NITEC/Diploma qualifications in Aerospace Engineering/ Aerospace Electronics/ Aerospace Avionic Engineering/ Aeronautical Engineering.
• At least 2 years of Cabin Maintenance working experience in Aviation industry, excluding OJT/Helper.
• Exposure on wide bodied airframes, Boeing and Airbus commercial aircrafts.
• Able to commit rotating shifts, if applicable.

A&C AIRCRAFT TECHNICIAN

• Perform C and D aircraft heavy maintenance tasks as directed by a Certifying Licensed Engineer/Duty Supervisor.
• Perform other tasks that may reasonably be requested by the Licensed Aircraft Engineer/Duty Supervisor.
• To carry out routine aircraft servicing tasks as required in accordance with maintenance manual procedures, observing all safety procedures and manufacturers/company regulations. Depending on the discipline this may include conducting general visual inspections and fluid replenishment system servicing, refuelling etc.To effectively use any specialized tooling or test equipment that may be required as part of the checking, testing, replacement or servicing of a system or component.
• The ability to understand the need for such equipment’s as references in the aircraft manufacturer’s manuals is essential.
• The ability to communicate at various levels, and to coordinate with other areas over technical issues, to ensure that all relevant parties are aware of the aircraft’s serviceability status.
• To ensure the maintenance of tools and equipment in the relevant work place and conducting safe working practices at all times.
• Any other ad-hoc duties assigned by the Supervisor.

Requirements:

• Minimum NITEC/Diploma qualifications in Aerospace Engineering/ Aerospace Electronics/ Aerospace Avionics Engineering/ Aeronautical Engineering.
• At least 2 years of A&C maintenance working experience in Aviation industry, excluding OJT/Helper.
• Exposure on wide bodied airframes, Boeing and Airbus commercial aircrafts.
• Able to commit rotating shifts, if applicable.

SHEETMETAL AIRCRAFT TECHNICIAN

• To perform Structural Repair as per OEM approved Structural Repair Manual and Repair Disposition.
• To assist Aircraft License Engineer and Supervisory Lead to perform damage/repair assessment.
• To perform part forming such as skin doubler, stiffener and bracket for structural repair proposes in-accordance to OEM approved manual or drawing.
• To perform basic airframe/cabin task as required to facilitate access removal for structural repair.
• Required excellent tool maintenance and housekeeping practices.
• Any other ad-hoc duties assigned by the Supervisor.

Requirements:

• Minimum NITEC/Diploma qualifications in Aerospace Engineering/ Aerospace Electronics/ Aerospace Avionics Engineering/ Aeronautical Engineering.
• At least 5 years of Sheetmetal working experience in Aviation industry, excluding OJT/Helper.
• Exposure on wide bodied airframes, Boeing and Airbus commercial aircrafts.
• Familiar on basic structural repair tooling and practices.
• Must be able to work in confine space such as Fuel Tank if needed.
• Capable to interpret OEM Approved Engineering Drawing, Aircraft/Component Maintenance Manual and Structural Repair Manual.
• Able to commit rotating shifts, if applicable.

ENGINE OVERHAUL AIRCRAFT TECHNICIAN

• Perform disassembly/ assembly of engine/ module for repair and overhaul.
• Perform Boroscope inspection
• Install engine components onto the engine/ module.
• Perform troubleshooting, modification and maintenance works

Requirements:

• Minimum NITEC/Diploma qualifications in Aerospace Engineering/ Aerospace Electronics/ Aerospace Avionics Engineering/ Aeronautical Engineering.
• At least 2 years of Engine Overhaul working experience in Aviation industry, excluding OJT/Helper.
• Able to commit rotating shifts, if applicable.

GROUND SUPPORT EQUIPMENT OPERATOR

• To carry out preventive and corrective maintenance of the GSE
• To ensure equipment decals are visible. Replace if necessary
• Delivery of GSE to and from hangar
• Carry out inspection of GSE around airport bays
• Repositioning of maintenance steps from bays when required
• To ensure all metal structures of GSE are corrosion free by removal of corroded surface and using of corrosion protection agent
• To lubricate all movable joints

Requirements:

• NITEC in Mechanical / Electrical / Mechatronic engineering
• Class 3 or 4T preferred

Job Description:

1. Transit Inspection / Dispatch / Maintenance / Training & Documentation Management
   Responsible for overseeing and coordinating aircraft in transit checks, aircraft dispatch, routine and non-routine maintenance tasks.
2. Supervision of Engineering Agent on Operational Procedures
   Working in tandem with the Engineering Agents to ensure compliance with safety operational procedures. Focus on ensuring aircraft maintenance services are prompt and reliable, and aircraft are ready for on-time departures.
3. Management, Updating, and Safekeeping of Tools, Aircraft Materials, Technical Publications, and Company Assets
   Ensure proper control, timely updates, and secure storage of all support equipment, tools, spare parts, technical manuals, and other assets used in maintenance operations.
4. Administrative Duties
   Handle administrative tasks including organizing and maintaining records, invoicing, and documentation.

Requirements:

• Minimum Aircraft Maintenance Engineering License with at least 6 years of experience.
• College/Diploma or equivalent academic qualification.
• Interpersonal skills to establish and maintain effective working relationships.
• Planning and organizational skills to coordinate workload across multiple assignments.
• Availability to work during weekends and public holidays.
• Class 3 driving license.
• Ability to respond to urgent maintenance calls.

Please indicate your salary expectation. We offer a competitive salary commensurate with experience. Additional benefits include concession tickets, medical coverage, and insurance.

We regret to inform that only shortlisted candidates will be notified. Thank you for your application.

Licensed Aircraft Engineer B1/B2

• Perform/Certify aircraft maintenance tasks
• Attend to aircraft routine transit/daily/weekly/monthly checks and other line maintenance duties
• Inspect, troubleshoot, and repair aircraft and/or engines and all associated aircraft systems
• Inspect finished work, operation/functional tests and aircraft defect rectification
• Sign-off all tasks performed and comply with Airworthy Release
• Manage and maintain tool & equipment store and provide recommendations, if applicable
• 70% Base, 30% Line, depending on workload

Requirements:

• Prefer EASA, FAA or related licence

• Wide body aircraft rating preferred

• At least 5 years of B1 or B2 Engineer experience

Job Description:

1.Transit Inspection / Dispatch / Maintenance / Training & Documentation Management

Responsible for overseeing and coordinating aircraft in transit checks, aircraft dispatch,

routine and non-routine maintenance tasks.

2. Supervision of Engineering Agent on Operational Procedures

Working in tandem with the Engineering Agent ensuring compliance with safety operational

procedures. Focusing on making sure that aircraft maintenance services are on quick response time

and high dispatch reliability. Ensuring aircraft are ready for on-time departures.

3. Management, Updating, and Safe keeping of Tools, Aircraft Materials, Technical

Publications, and Company Assets. To ensure proper control, timely updates, and secure storage

of all support equipment, tools, spare parts, technical manuals, and other related assets used

in maintenance operations.

4. Administrative Duties Handle various administrative tasks including organizing and maintaining

related records, invoicing and documentation.

Requirements:

* You have minimum Aircraft Maintenance Engineering License with at least 6 years experience.

* You must Hold College/ Diploma and / or equivalent academic qualification.

* You must have interpersonal skills necessary to establish and maintain effective working relationships with

the team.

*You have planning and organizational skills to coordinate workload around multiple assignments.

* This job requires to work during weekends and public holidays.

* You need to have a class 3 driving license.

* You are expected to respond to urgent and maintenance calls.

Please indicate your salary expectation.

We offer a competitive salary, commensurate with experience. Additional benefits include concession tickets, medical cover and insurance among others.

We regret to inform that only shortlisted candidates will be notified. Thank you for the application.

Licensed Aircraft Engineer B1/B2

• Perform/Certify aircraft maintenance tasks
• Attend to aircraft routine transit/daily/weekly/monthly checks and other line maintenance duties
• Inspect, troubleshoot, and repair aircraft and/or engines and all associated aircraft systems
• Inspect finished work, operation/functional tests and aircraft defect rectification
• Sign-off all tasks performed and comply with Airworthy Release
• Manage and maintain tool & equipment store and provide recommendations, if applicable
• 70% Base, 30% Line, depending on workload

Requirements:

• Prefer EASA, FAA or related licence

• Wide body aircraft rating preferred

• At least 5 years of B1 or B2 Engineer experience

Job Description:

1.Transit Inspection / Dispatch / Maintenance / Training & Documentation Management
Responsible for overseeing and coordinating aircraft in transit checks, aircraft dispatch,

routine and non-routine maintenance tasks.

2. Supervision of Engineering Agent on Operational Procedures

Working in tandem with the Engineering Agent ensuring compliance with safety operational

procedures. Focusing on making sure that aircraft maintenance services are on quick response time

and high dispatch reliability. Ensuring aircraft are ready for on-time departures.

3. Management, Updating, and Safe keeping of Tools, Aircraft Materials, Technical

Publications, and Company Assets. To ensure proper control, timely updates, and secure storage

of all support equipment, tools, spare parts, technical manuals, and other related assets used

in maintenance operations.

4. Administrative Duties Handle various administrative tasks including organizing and maintaining

related records, invoicing and documentation.

Requirements:

* You have minimum Aircraft Maintenance Engineering License with at least 6 years experience.

* You must Hold College/ Diploma and / or equivalent academic qualification.

* You must have interpersonal skills necessary to establish and maintain effective working relationships with

the team.

*You have planning and organizational skills to coordinate workload around multiple assignments.

* This job requires to work during weekends and public holidays.

* You need to have a class 3 driving license.

* You are expected to respond to urgent and maintenance calls.

Please indicate your salary expectation.

We offer a competitive salary, commensurate with experience. Additional benefits include concession tickets, medical cover and insurance among others.

We regret to inform that only shortlisted candidates will be notified. Thank you for the application.

• Fully sponsored classroom training (3 months) & OJT (9 months) to become Certified Aircraft Technician/ Engineer
• Strong start in aerospace industry with a world-leading MNC
• Good Career Progression
• Competitive Salary Package (Monthly Wage Supplement, VB About 4 months, Yearly Increment, Flexi Benefits $1700 Medical & Dental)
• Company Transport is Provided (Door to door)
• 8 working hours per day only

• Monthly Salary from S$,100 - S 2,600
• Normal office hours during classroom training period
• After classroom training, work 4 days off 2 days on 8 hours shift, AM or PM rotating

• Perform troubleshooting, repair, overhaul of aircraft engines
• Dismantle aircraft engines
• Testing and maintenance of engine equipment
• Perform simple operational checks on aircraft system

• Minimum Nitec or above in mechanical/mechatronic/aerospace engineering or any other related engineering courses

• Fully sponsored classroom training (3 months) & OJT (9 months) to become Certified Aircraft Technician/ Engineer
• Strong start in aerospace industry with a world-leading MNC
• Good Career Progression
• Competitive Salary Package (Monthly Wage Supplement, VB About 4 months, Yearly Increment, Flexi Benefits $1700 Medical & Dental)
• Company Transport is Provided (Door to door)
• 8 working hours per day only

• Monthly Salary from S$,100 - S 2,600
• Normal office hours during classroom training period
• After classroom training, work 4 days off 2 days on 8 hours shift, AM or PM rotating

• Perform troubleshooting, repair, overhaul of aircraft engines
• Dismantle aircraft engines
• Testing and maintenance of engine equipment
• Perform simple operational checks on aircraft system

• Minimum Nitec or above in mechanical/mechatronic/aerospace engineering or any other related engineering courses