700 Manufacturing jobs in Singapore

• Carry out production operations, perform battery demanufacturing activities, perform equipment operating and monitoring activities.
• Carry out after recycling finished product collection into drums, bags or isotainers in a safe and efficient manner.
• Monitor closely equipment performance and finished good output discharge point to ensure product is harvested in a safe and efficient manner.
• Carry out manual work such as transferring production consumables to recycling system, manual handling production tools and jigs for recycling activities.
• Conduct line checking, and equipment flushing during batch changeover and handle regular start up, shutdown and commissioning of critical process equipment.
• Operate plant equipment such as air compressor, pumps, heat exchangers, rotary equipment etc. in a safe manner.
• Carry out minor maintenance work, 5S and Kaizen improvement projects and energy conversation initiatives.
• Adhere to all in house chemical plant safety, security, industrial hygiene standards and EHS & Quality compliance and regulations.
• Perform any other production duties assigned by the Team Leader and/or Production Supervisor.
• Operator under Battery Feeding Area (BFA): Handling battery material pre-processing and recycling preparation work with data recording on material incoming, material WIP processing and outgoing.
• Operator under Mechanical Plant Area (MPA): Machinery operation, output handling, basic maintenance and monitoring of equipment, data recording on process equipment, etc.
• Operator under Chemical Plant Area (CPA): Chemical dosing and handling, Machinery operation, output handling, basic maintenance and monitoring of equipment, data recording on process equipment, etc.
• Operator under Mechanical Vapor Recompression (MVR): Machinery operation, output handling, basic maintenance and monitoring of equipment, data recording on process equipment, etc.

• Possess a valid Singapore WSQ Forklift Operator Certificate.
• Minimum secondary education.
• Strong understanding of workplace and equipment safety protocols.
• Job training will be provided.
• Entry level is welcome.

We are seeking a skilled Manufacturing Associate to join our team. As a key member of our production team, you will be responsible for manufacturing and assembling high-quality units according to established guidelines and procedures.

Key Responsibilities:

Together, we have partnered with laboratories around the world to enable and accelerate science for over 85 years. Driven by innovation, dedication, and an unwavering commitment to our customers, the global community, and our teams, our central aim remains focused on creating a positive impact.

We partner with scientists, clinicians, lab technicians, engineers, and food producers globally to empower them with reliable and compelling scientific insights they need to accelerate the development of ground-breaking products and laboratory solutions that improve the quality of our lives. By drawing on the ingenuity, creativity, and passion of our people, together, we enable our customers to fulfill their mission towards a healthier, safer, and more sustainable world.

Our sales team, field service engineers, and application scientists drive innovation and customer success, propelling our mission to accelerate scientific outcomes with cutting-edge technology, world-class service, passion, and purpose through their expertise and dedication.

From IT to HR and Legal to Marketing, our corporate professionals profoundly impact our business success in support of a healthier planet and population.

• 5000+ employees worldwide
• 100,000 active instruments powering discoveries globally
• 90,000 customers served across diverse industries
• Offices in 35 countries, serving customers in 168 countries through direct operations and distributors
• Nearly one million hours returned to science by reducing time spent on non-core activities

Responsible for performing a variety of technical support duties in one or more manufacturing areas. Duties may be related to installation, maintenance, repair and support of manufacturing equipment, technical support of one or more production processes, product test and troubleshooting, and technical analyses and problem-solving.

Conducts tests, experiments and/or problem resolution associated with components, parts, products or processes/systems. May design and/or build tools.

Determines and develops approaches to manufacturing technical assignments and processes.

Responsible for technical duties which require planning and judgment.

Solves a broad range of manufacturing technical problems of varying scope and complexity.

• Nitec, Higher Nitec, Diploma in Mechanical Engineering, Electrical Engineering or equivalent.

• Minimum of 1-3 years of relevant experience in a Manufacturing environment.

• Proficiency in speaking and reading Mandarin is required.

• Strong understanding of both general and technical aspects of the role.

This job has a full time weekly schedule. Agilent Technologies Inc. is an equal opportunity employer. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran status, disability or any other protected categories under all applicable laws.

No

Day

No End Date

Manufacturing

Responsibilities:

1. - Identify and implement manufacturing process improvements and best practices.
2. - Create standard engineering and production work procedures and instructions.
3. - Plan process workflows and analyse production data and trends to improve manufacturing efficiency.
4. - Provide support in production to ensure production operations run smoothly and customer requirements are met.
5. - Investigate non-conformance root cause and suggest corrective action.
6. - Provide coaching and training to machinists on work procedures and instructions.
7. - Perform any other duties as assigned.

Requirements:

1. - Diploma in Mechanical/Mechatronic Engineering or related discipline.
2. - Ability to interpret BOM & technical drawings.
3. - Good knowledge of manufacturing best practices.
4. - Good knowledge of relevant Product, Technical Standards and Codes.
5. - Strong investigation and problem solving skills.

• Contribute to Life Science projects for Antaes Asia clients
• Drive initiatives to enhance operational processes and equipment performance, aiming to achieve the highest standards of manufacturing excellence.
• Lead thorough investigations into non-conformance incidents, developing comprehensive reports on issues related to quality and Environment, Health, and Safety (EHS) observed during manufacturing or batch reviews.
• Proactively monitor existing processes and equipment to identify opportunities for improvement and implement effective solutions.
• Provide strategic input and recommendations on operational improvements that align with business targets and contribute to overall manufacturing success.
• Review and contribute to the development of batch-related recipes (such as those in POMS and DeltaV), manual operations procedures, and additional manufacturing documentation to ensure accuracy and efficiency.
• Offer expert input or review the design of batch and cleaning manufacturing recipes within the Distributed Control System (DCS).
• Lead and manage digitalization projects that align with and support the company's strategic business objectives, enhancing automation and efficiency.
• Conduct training sessions for operators on processes and procedures, ensuring compliance and proficiency in operational practices.
• Lead/participate in safety risk assessments or participate in process hazard analysis as an operations representative (PHA).
• Actively resolve batch-related document errors in a timely manner.
• Communicate all events/issues effectively with relevant stakeholders.
• Provide inputs for investigation – impact assessment and appropriate CAPA.
• Ensure overall plant upkeep during the shift and ensure the plant is always in audit-ready mode.
• Oversee deliverables ahead, anticipate complexities, and prevent potential issues.
• Ensure processes are running as per planned schedule with minimal delays. Highlight effectively to shift supervisor if delays are expected.
• Contribute to the promotion of Antaes services on top of assistance provided to clients.

Job Requirements:

• Diploma/ Degree in Chemistry, Chemical Engineering, Science or equivalent
• Minimum 3 years of pharmaceutical, biopharmaceutical experience in Quality and/or Compliance (GMP) environment.
• Adhere to a safe work environment in accordance with regulatory and global/local EHS policies.
• Candidate must be highly motivated, able to work independently as well as in a team, and have good organizational and oral and written communication skills.
• Excellent communication skills, both written and verbal, in English.

Posting Date: 19 May 2025 | Closing Date: 17 Aug 2025

SSMC (Systems on Silicon Manufacturing Company Pte. Ltd.) is a joint venture between NXP and TSMC. We provide flexible, cost-effective semiconductor fabrication solutions with fully equipped SMIF cleanroom environments, 100% equipment automation, and proven wafer-manufacturing processes.

At SSMC , every career journey is unique and rewarding. We are seeking innovative, passionate, and talented individuals to join our team.

We are looking for a Manager to join our diverse Manufacturing team. You will be responsible for managing and leading a team of Engineers, Leaders, and Manufacturing Assistants to process wafers in line with operational needs.

1. Collaborate with top management to establish clear directions and ensure timely execution.
2. Develop plans and strategies to meet operational output requirements.
3. Create plans and procedures for WIP and Test wafer management.
4. Set targets, goals, and projects to maintain high turn ratios, manning ratios, and line linearity.
5. Guide and train team members to achieve optimal performance.
6. Conduct appraisals, provide guidance, and develop career paths for subordinates.
7. Forecast financial budgets for materials such as test wafers, SMIF pods, and production tools.
8. Support strategic planning initiatives.
9. Identify, acquire, and manage performance to enhance team capabilities continuously.

Qualifications include a Bachelor’s or Master’s Degree in Engineering or equivalent, with 6-10 years of relevant experience in high-volume technology manufacturing environments. Wafer fab experience is an advantage.

Required skills include strong leadership, mentorship, coaching, knowledge of wafer fabrication processes, equipment configurations, WPH, and semiconductor process flow. Proficiency in MS Office (Excel, PowerPoint, Outlook), good communication, leadership, and interpersonal skills are essential.

SSMC is committed to equal employment opportunities and adheres to the Tripartite Guidelines on Fair Employment Practices (TGFEP). All qualified applicants will be considered based on merit, regardless of age, race, gender, religion, marital status, family responsibilities, disability, or other protected attributes.

Specialization: Manufacturing/Production Operation

Employment Type: Permanent

Minimum Experience: 5 Years

Work Location: Singapore

If you encounter technical difficulties, please click here for assistance .

© 2024. All Rights Reserved. Systems on Silicon Manufacturing Co. Pte. Ltd.

When joining PerkinElmer, you select an experienced and trusted leader in scientific solutions, with the support of a global service network and distribution centers, providing the right solution, at the right time, to meet critical customer needs. With over an 80+ year legacy of advancing science and a mission of innovating for a healthier world, our dedicated team collaborates closely with commercial, government, academic and healthcare customers to deliver our broad portfolio of analytical solutions, and OneSource services.

Responsibilities

1. Meet production quantity targets as per daily production plan and process quality requirements as specified by the work instructions.
2. Participate in multi-skill training and conduct on-the-job trainings to new technicians.
3. Assist the Manufacturing Supervisor to control one main production line/process which may include several sub-assembly processes.
4. Recommend and implement solutions to enhance productivity and product quality.
5. Assist to collect/compile quality data for filing/engineering study purpose.
6. Assist to control production materials and perform material cycle count.
7. Actively initiate/participate in workplace safety, 5S and environmental friendly activities.
8. Recommend RMA rework with lowest cost. Perform trouble shooting for testing fall out instruments and parts evaluations as per Engineering requirement.
9. Assist line supervisor to run one process/product line.

Requirements

1. Higher Nitec/Nitec certification in Mechanical/Electronic Engineering or equivalent.
2. Minimum 3 - 4 years of hands-on relevant working experience.
3. Those without the necessary experiences will be considered for junior technician.
4. High degree of technical competence and creativity of relevant working experience.

Are you ready to help improve the lives of millions of people and create a healthier world? When you work at PerkinElmer, that’s exactly what you’ll do. From our dedicated scientists and world-class operations employees to our innovative R&D professionals and committed sales and service groups, we’re a unique team of 5,000+ global colleagues who come to work every day knowing we’re making a difference. Through innovation, collaboration, and believing in our mission, we strive to create an inspiring and inclusive culture for our employees, so that they can be their best and, together, create a better tomorrow. Join us today.