1038 Design Bridge jobs in Singapore

Key Roles and Responsibilities:

• Conduct site visits, assess feasibility, and propose suitable solar solutions.
• Design Rooftop & Ground Mounted PV systems, including layouts, SLDs, schematics, and BOQ preparation.
• Perform system sizing calculations and use PV simulation software (e.g., PVsyst) for performance analysis.
• Prepare and submit design documents for approvals while ensuring compliance with local codes and safety standards.
• Coordinate with engineers, suppliers, and stakeholders to align designs with project requirements.
• Oversee scheduling, factory inspections, and project execution, ensuring quality and adherence to timelines.
• Review and update design files, ensuring accuracy and completeness.
• Assist with installation, troubleshoot technical issues, and provide service support as needed.
  Perform any additional tasks assigned by the reporting officer.

Qualifications & Experiences:

• Diploma / Degree in Electrical Engineering
• 2 years of relevant working experiences or 1-year Solar PV experience (Fresh graduate for Junior position is welcome to apply)
• Has knowledge in electrical design concepts
• Ability to quickly read and understand construction plans and schematics diagrams.
• Proficiency in Microsoft Office, Autocad and construction software.
• Knowledge of engineering principles and practices.
• Ability to work cross functionally in a fast-paced environment, communicate concisely to all levels of the organization, and maintain effectiveness while working autonomously or collaboratively.
  Ability to multi-task and manage deliverables for multiple projects at a time

Preferred Skills & Characteristics:

• Independent and a good team player
• Analytical and organised with good problem-solving skills
• Proactive, positive and self-motivated with ability to work without close supervision
• Strong interpersonal and leadership skills
• Demostrated oral and written communication skills
• Very detail oriented and well organized
• High energy with a can-do and positive attitude, thrive in a dynamic environment and deliver within time constraints

We regret that only shortlisted applicants will be notified

Primary Function: The role is client-facing and meeting-oriented. We are seeking candidates who spend a significant amount of time in client meetings and coordination, not those focused on drafting/drawing.

Skill: Must be able to understand and review technical drawings and effectively interface with clients.

Flexibility: Exceptionally senior candidates, or those identified as better suited for another specialization during the interview process, may be considered for other roles, provided they are at the required Manager/Assistant Manager level.

The Design Engineer directs, coordinates and exercises functional authority for planning, organization, control, integration and completion of engineering projects within the area of assigned responsibility.

The role is to evaluate, develop and enhance drainage design concepts of medium to large scale projects with limited complexity to achieve a sustainable and comprehensive final design output and ensure strict system compliances, functionality, usefulness, and identify possible loopholes to mitigate potential problems for better risk management.

JOB DESCRIPTION

• Manage design coordination with internal departments and external clients / consultants / contractors in project assigned.

• Manage deviations of original intent / contractual obligations and raise issue of variations with superior.

• Ensure strict conformity / compliances of simple / intermediate design, system balancing, details, schematics and engineering calculations.

• Basic understanding of system design and perform simple / intermediate calculations using internal software and ensure strict compliance to system conformity.

• Plan and organise as required the design approach and prioritization of work according to work scope and site condition.

JOB REQUIREMENTS

• Candidate must possess at least a Diploma, Advanced/Higher/Graduate Diploma, Bachelor's Degree, Post Graduate Diploma, Professional Degree, Engineering (Civil), Engineering (Mechanical) or equivalent.

• Well versed in Autocad and Office suite software. Knowledge of BIM 3D modelling is an added advantage.

• At least 2 year(s) of working experience in project design coordination / construction experience.

• Preferably Junior Executives specializing in Engineering - Civil/Construction/Structural or equivalent.

• Exposure to BIM Modeling and coordination essential to worktask.

• Good interpretation of Architectural and Structural drawings.

Job Description & Requirements

• Provide Autocad drawings for customers
• Provide ideas for design on our Industrial machines
• coorodination with Managers, Engineers, Supervisors and Technicians on project issues with regards to fabrication and design
• submission of materials for purchase requisition once design is confirmed
• monitor project schedule
• QC check of all end products before sent for delivery
• ITE/Diploma in Mechanical Field/Tools & Fabrications
• Must know Autocad software
• Location : Tuas
• Wide learning exposure
• Willing to learn and hardworking
• Chinese and English Speaking Environment
• Attractive renumeration

Key Responsibilities

1. Design & Drafting

• Develop and prepare detailed shop drawings, erection drawings, and reinforcement detailing for precast concrete components (e.g., beams, columns, wall panels, slabs, staircases).
• Modify and optimize designs based on project requirements, production capabilities, and site constraints.
• Ensure drawings comply with relevant codes, standards, and client specifications

2. Coordination & Communication

• Liaise with architects, consultants, and main contractors to resolve design discrepancies.
• Work closely with the production department to ensure designs are practical for manufacturing and installation.
• Attend design coordination meetings with stakeholders to address technical queries.

3. Technical Calculations & Analysis

• Perform structural calculations for load-bearing capacity, reinforcement requirements, and stability of precast elements.
• Evaluate alternative design solutions for cost savings and efficiency improvements.
• Use structural analysis software to verify designs.

4. Quality & Compliance

• Ensure all designs comply with safety regulations, industry standards, and company quality procedures.
• Review and approve final drawings before production release.
• Conduct site visits when necessary to verify installation and alignment with design intent.

Qualifications & Requirements

• Bachelor's Degree in Civil Engineering, Structural Engineering, or related field.
• Minimum 2–5 years of experience in precast design or structural engineering.
• Proficient in Etabs, Prokon and structural analysis software.
• Knowledge of relevant design codes.
• Strong analytical skills and attention to detail.
• Good communication and coordination skills with multidisciplinary teams

Job Type: Full-time

Pay: $4, $6,500.00 per month

Work Location: In person

CAD Designer

Roles & Responsibilities

• Produce P & ID
• Generate general arrangement drawings in 2D & 3D with AutoCad / Solidworks according to the relevant code requirements and the project requirements
• Monitor drawings submission and approval status
• Prepare and drafting of the technical drawings for projects, proposal submissions, etc
• Preparation of precision technical shop drawings, M&E drawings, working drawings, detail drawings and as-built drawings using AutoCAD software
• Designing and modifying for project related submissions
• Assist in quantity and dimension measurement
• Perform quality work within deadlines with or without direct supervision
• Documentation of working drawings and projects
• Perform any other duties as assigned by the Design Manager

Roles & Responsibilities

• Min Diploma / ITE in Mechanical / Marine & offshore, Higher Nitec in Integrated Mechanical & Electrical Design
• Min 3-5 years' experience in design of firefighting system for offshore, oil & gas industries
• Strong understanding of firefighting system & lifesaving & safety systems and relevant regulations such as SOLAS, FSS & marine classification rules and regulations

Job Description

• Modeling, Analyzing and finalizing structural design for using structure analysis software
• Review and approval of drawings, specifications, work method statements, risks assessment and others related to the C&S works
• Ensure all C&S works comply with relevant statutory standards, regulations, and Codes of Practice.
• Shop drawings submission to client/consultant for approval
• Coordination with the Client, Architect, Construction team, and M&E design team to resolve discrepancies issue and technical issues
• Prepare and check all calculation reports for submission

Requirements

• Degree in Civil and Structural Engineering or its equivalent
• Prefer PE certified or degree recognized by the Professional Engineers Board of Singapore for Associate level
• Minimum 2 years relevant experience
• Good exposure in the analysis and design of geotechnical works, concrete structures, steel structures, civil works, or soil-structure interactions
• Good knowledge of the various engineering design software and analytical tools
• Applicant who has lesser experience will consider for Engineer role

At Surbana Jurong, we put talent, hard work, teamwork and a fun workplace together to approach problems and solve them creatively and collaboratively. Join us in making a positive impact on the world

Job Duties & Responsibilities:

• Carry out civil / structural design (knowledge in steel structure preferred)
• Prepare calculations / plans for submission to Main Contractor.
• Prepare shop drawings.
• Manage projects' design
• Liaising with internal stakeholder on work procedure and design implications.
• Attend Projects & Consultants Meetings
• Providing technical advice
• Liaising with relevant professional staff such as Main Contractor's ERSS QP/ AC

Requirements:

• Bachelor's Degree/Post Graduate Diploma/Professional Degree in Engineering (Civil) or equivalent.
• Register Structural Steel Engineer (StEr) (Preferred)
• Familiar with Eurocode (Preferred)
• Background in construction design (Preferred)
• Familiar with Steel Structure design
• Familiar with Euro Code
• Familiar with Engineering Software
• Familiar with Autocad
• IT Literate able to use Microsoft Office and Microsoft Project
• Good command of written and spoken English

Design Engineer (Drafter)

Salary: Up to $4,200

Working Hours: Monday – Friday (No weekends)

Responsibilities

• Coordinate with clients, consultants, and contractors
• Prepare, update, and review drawings (AutoCAD, Revit a plus)
• Handle submissions, approvals, and documentation
• Assist in site measurements and verification of works

Requirements

• Diploma/Nitec/Degree in Architecture or related field
• Fresh grads encouraged to apply
• Proficient in AutoCAD (Revit an advantage)
• Positive, proactive, and eager to learn
• Able to work independently and in a team

Seize This Opportunity

Click Apply Now to upload your updated Resume/CV, and take the first step toward an exciting new career

Only shortlisted candidates will be contacted.

Chong Zhe Hui

Registration No: R

EA Licence no.: 14C7121