292 Testing Protocols jobs in Singapore

Responsibilities:

• Inspect outgoing & incoming parts according to specification of inspection.
• Maintain quality record and file quality data. Highlight quality problems to Managers for action.
• Ensure non-conforming products are not mixed with good products prior to disposition.
• Authorise the rejection of parts if found unsatisfactory.
• Authorise release of conforming parts and send to store for subsequent delivery to customers.
• Perform factory routine test and check of switchboards completed in the workshop.
• Test & commissioning of switchboards on board vessels and attend warranty /quality complaints.
• Conduct tests on switchboards which require witnessing by surveyors or consultants.
• Assist in quality responsibilities, achieving quality objectives and maintain housekeeping.
• Observe and adhere to safety rules and ensure the use of calibrated instrument for inspection.
• Initiate to prevent the occurrence of Product Non-Conformity and recommend solutions.
• Control further processing and delivery of Non-Conforming products until corrected.

Requirements:

• ITE/Diploma/Degree in Electrical field with 2 years in QA experience in marine/ industrial field
• Ability to travel on site, and oversea when required.

QA Engineer is required to work onboard the vessel so overseas travelling is required (such as Asia countries, UAE). Travelling allowance (S$80 or S$100)/day will be given.

Interested applicants, send in your updated resume by clicking "Apply Now".

Lin Weikang

EA Personnel No: R

EA License No: 23C1894

About the role

JEP ENGINEERING PTE. LTD. is seeking a driven and detail-oriented QA Engineer to join our team. If you thrive in a fast-paced, dynamic environment and take pride in delivering quality and exceptional work, this is an excellent opportunity to make a meaningful impact.

• Deploy incoming, in-process and outgoing inspection plans and SOP

• Conduct First Article inspections and prepare FAIR documentations for submission

• Able to perform root cause analysis and prepare the relevant documentations for non-conformance products

• Document inspection results, nonconformities and customer complaints

• Able to conduct internal audits to ensure compliance with quality standards

• Preparation and support external audits

• Analyzing data and generating detailed reports to identify areas for improvement

• Collaborating cross-functionally to resolve quality-related issues in a timely manner

• Providing training and guidance to Production team to uphold quality standards

• Staying up-to-date with industry regulations and best practices

• Continually seeking ways to optimize quality control measures and drive operational excellence

• Diploma and above in Engineering, Quality Assurance, or related technical field

• Minimum 3-5 years of experience as a QA Engineer or in a similar quality assurance role

• Proficiency in MS Office applications (Word, Excel, Power Point)

• Able to interpret customer drawings thoroughly including GD&T

• Able to interpret CMM inspection results after inspection

• Strong working knowledge of quality management systems and industry standards

• Excellent problem-solving, analytical, and decision-making skills

• Committed individual to delivering high-quality work

• Effective communication and collaboration abilities to work cross-functionally

JEP ENGINEERING PTE. LTD. with over 20 years of industry experience, we pride ourselves on our commitment to quality, innovation, and customer satisfaction.

Apply now and join our dynamic team

• Perform first article evaluation (FAE/FAI) and on new parts/products that are newly manufactured.
• Conduct shipping judgement meeting for first-time manufactured and shipped-out products.
• Handle quality claims from customers through corrective action request (CAR/NCR): evaluate, verify and disseminate information to respective departments.
• Manage claims to ensure root causes are analyzed and effective corrective/preventive action are being taken.
• Ensure prompt follow-up and replies on claims.
• Revise department's work standard according to job-flow changes.
• Conducts process audits according to schedule.
• Assist production lines on solving quality matters; discuss and feedback on any improvement.
• Provide engineering support and advice to other members.
• Coordinate monthly quality meeting.
• Supervise subordinate.
• Adhoc job duties as assigned.

Requirements:

• Degree in Mechanical/Mechatronics Engineering
• Prefer 2-3 years of relevant experience
• Entry level applicants with the correct aptitude will also be considered.

Bedok, East Area

Manufacturing Industry

5 days work week

Interested candidates, please send a detailed resume via email to

Tempserv Pte Ltd

License No: 06C3745

Attention: Audris Teo / EA Personnel No: R

We are seeking a Quality Assurance Engineer to ensure that all plastic injection moulded parts meet strict quality standards and customer requirements. This role involves hands-on inspection, documentation, and close collaboration with production and customers.

Key Responsibilities

• Maintain and improve overall quality standards for all moulded components.
• Lead in-process and final inspections, including dimensional checks and visual inspections.
• Communicate directly with customers on all quality matters, including feedback, complaints, and corrective actions.
• Prepare, review, and update Quality Control (QC) documents such as Control Plans, PFMEA, PPAP, and inspection reports.
• Conduct root-cause analysis and implement corrective/preventive actions for non-conformances.
• Support internal and external audits (ISO 9001 if applicable).
• Work closely with production to drive continuous improvement and reduce defects.

Requirements

• Experience: Minimum 2–3 years in plastic injection moulding quality assurance or related field.

• Technical Skills:

• Proficient in using SmartScope or other optical/3D measurement systems.

• Strong knowledge of quality control tools.
• Documentation: Well-versed in all QC documentation and standards.
• Soft Skills: Strong communication and problem-solving abilities; able to liaise with customers and cross-functional teams.

• Well Established Company
• Basic $3200 to $4500 + AWS + VB
• Working Location: Tuas, Singapore
• Company Transport Provided: Boon Lay; Choa Chu Kang; Bukit Batok
• Monday to Friday (8:15am to 5:45pm)

Job Responsibilities:

• Develop and implement inspection and testing protocols for incoming and outgoing materials and components.
• Analyze non-conformities and initiate corrective and preventive actions (CAPA).
• Liaise with suppliers and subcontractors to resolve quality issues and improve incoming part quality.
• Conduct root cause analysis for product failures or customer complaints and support resolution efforts.
• Participate in internal quality audits in compliance with ISO or other Quality Management System (QMS) standards.
• Support continuous improvement initiatives to enhance product and process quality.
• Collaborate with engineering, production, and supply chain teams to ensure quality requirements are met.
• Maintain Quality Management System documentation, including SOPs, work instructions, and quality reports.
• Assist in testing and commissioning activities as needed.
• Represent the QA function in project meetings and customer quality reviews as required.

Requirements:

• Diploma / Degree in Electrical Engineering or equivalent
• Experience in quality assurance or quality engineering roles, preferably in manufacturing or electrical/electronic industries.

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume:

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
  Education background

We regret that only shortlisted candidates will be contacted.

NG DIAUM YEE (R

EA Recruitment Pte Ltd

EA License No: 21C0492

Job Summary:

The main core task for this role is leading company to certify in new standard, while also maintain

existing IMS, which require oversee each process and department action to ensure it meets company

IMS standards. Other side task such as oversee the quality control process of product line, conduct FA when receive complain and other quality related activities.

Main duties and responsibilities:

1. Ensure that Quality management system and procedures compliance with ISO9001, ISO14001 and ISO45001 requirement.

2. Lead and involved in new standard qualification process (Such as: IATF 16949), included liaise with consultant, procedures setup, 3rd party audit handle.

3. Perform internal quality audits that address certification and contractual requirements

4. Conduct training for internal employees for new implementation or standard requirement. (such as: SPC, MSA, FMEA+, APQP, PPAP)

5. Monitor and evaluate the effectiveness of the Non-conformances (NC) and ensure CAPA is closed on a timely basis.

6. Perform Failure Analysis (FA) on product failures or customer complaint and work with engineering team to resolve issue.

7. Lead and perform Measurement System Analysis (MSA), such as: GR&R

8. Oversee all activities for incoming quality, in-process and outgoing control and inspection when require.

9. Implementing and maintaining Company's Integrated Management Systems, Manual and Procedures (ISO9001, ISO14001, ISO45001 & IATF 16949), ensure the compliance and effectiveness of the IMS System

10.Responsible for conformity to product requirements have the authority to stop shipment and stop production to correct quality problems

1. Analyses data to identify areas for improvement of production or product quality (SPC)

COMPETENCIES/ JOB SPECIFICATIONS:

1. Knowledge of Integrated Management system (ISO 9001, ISO14001 and ISO45001)

2. Preferable experiences in IATF 16949

3. Certified Internal Auditor preferred

4. Knowledge in Statistical Process Control (SPC) and Statistical techniques.

5. Understand Manufacturing tools, such as: FMEA, control plan

6. Ability to work independently and proactively without supervision

7. Well organized and detail-orientated

8. Possess good oral and written communication skills

9. Proficiency in English and Mandarin (Require to liaising with internal and external mandarin speaking stakeholder)

10. Possess a resilient and "can-do" attitude

MINIMUM QUALIFICATION AND WORK EXPERIENCE REQUIRED

1. Degree in Science/Engineering or equivalent

2. Minimum 5 years relevant experience in Quality position

3. Conversant with Microsoft word, Excel, and PowerPoint

4. Experienced in MRB system will be advantages

5. Accuracy and timely delivery of the job assigned

6. Proactive to matter arising

7. Accountability and Ownership

8. Ensure compliance of IMS systems

Working hour: 7:45am - 4:45pm (Monday - Friday)

Video Streaming APPS QA Engineer local to Singapore

Coding experience on Python/JavaScript/Selenium is a MUST

User facing App Testing, Video App Testing in Samsung, Sony etc.,

Charles Proxy, Wireshark

Must visit Singapore lab in person from Day1

• Experience in Windows & Web application testing

• Experience working on Video and OTT application testing - for example Netflix / Instagram or similar application

• Experience in testing accessibility products such as VoiceOver, Dynamic Type, Hover Text, and Full Keyboard Access

• Be able to define test approaches and strategies, as well as execute functionality, compatibility, integration and reliability testing for streaming video applications running on Windows, iOS, macOS, web & 3rd party devices (like LG TVs, Roku, Amazon Fire TV stocks etc.).

• Extensive experience in using CharlesProxy or Wireshark use of any such network monitoring tools.

• Experience in functional test automation using scripting languages such as Python or Javascript. ( good to have)

• Experience in back end service testing is a plus

• Expert in triaging bugs, writing detailed bug reports, analyzing logs & taking bugs successfully to closure.

• Unix Terminal Knowledge - Experience using command line interface to collect logs and diagnose problems

Soft Skills

• Must be proactive and quick to resolve issues

• Must have the ability to try to solve the problems / blockers independently

• A track record of working cross-functionally as a problem solver

• Excellent written and technical communication skills

Job Responsibilities:

• Perform in-process and final product inspections according to work instructions, drawings, and specifications.
• Conduct tests on raw materials, semi-finished, and finished products using precision instruments such as calipers, micrometers, hardness testers, CMM, height gauges, and scopes.
• Document inspection results accurately and maintain detailed QC records in compliance with ISO standards.
• Identify non-conforming products, perform root cause analysis, and support corrective and preventive actions using methodologies such as 8D problem-solving.
• Ensure calibration and proper maintenance of measuring and test equipment.
• Support and participate in internal quality audits, customer audits, and continuous improvement initiatives.
• Collaborate closely with production and engineering teams to ensure quality objectives and customer requirements are met.
• Promote and implement 5S practices to maintain a safe, organized, and efficient working environment.

Job Requirements:

• Bachelor's Degree in Engineering, Industrial Technology, Manufacturing, or a related field.
• Minimum 2 years of QC or QA experience in a manufacturing environment, preferably in the semiconductor sector.
• Hands-on experience with ISO quality systems, 5S workplace organization, and structured problem-solving (8D methodology).
• Proficient in the use of quality control tools and equipment (CMM, height gauges, scopes, micrometers, calipers, etc.).
• Strong knowledge in interpreting technical drawings, GD&T, and product specifications.
• Excellent analytical, observation, and documentation skills with high attention to detail.
• Team player with good communication and interpersonal skills.

• Ensure the consistent delivery of high-quality Printed Wiring Boards that meet customer specifications and industry standards by managing quality assurance processes and serving as the primary liaison for customer service accounts.
• Responsible for driving continuous improvement, resolving quality-related customer issues, and upholding compliance with regulatory and internal quality systems to enhance customer satisfaction and product reliability.

Customer Quality Liaison

• Act as the primary contact for customer quality-related inquiries and complaints
• Coordinate resolution of customer issues through root cause analysis and corrective actions

Quality Control Oversight

• Monitor inspection and testing procedures are followed
• Monitor product conformance to IPC and customer-specific standards

Documentation & Compliance

• Maintain quality records in accordance with ISO 9001 and internal QMS protocols
• Prepare and submit quality reports to customers and internal stakeholders

Process Improvement

• Identify recurring quality issues and lead initiatives to improve manufacturing pro
• Support implementation of Problem-Solving methodologies

Audit & Review

• Participate in internal and external audits
• Ensure readiness for customers and regulatory inspection

Training & Support

• Provide guidance to production teams on quality standards and procedures
• Assist in onboarding new staff with QA related training
  Support new product introduction (NPI) with quality input and validation

Requirements:

• Degree in any Engineering discipline (Quality Engineering preferred) in a manufacturing environment
• Min 2 years of experience in Quality Assurance activities/operational
• Good communication, report writing and presentation skills
• Good analytical skills with ability to work effectively
• Independent, decisive and good at problem solving
• Able to adapt in a fast-paced environment
• Preferred with knowledge of PWB manufacturing processes
  Proficiency in Microsoft Office

Electronics MFG Industry

Loyang Area

Interested candidates, please forward a detailed resume and via email to

Tempserv Pte Ltd

License No: 06C3745

Attention: Audris Teo / EA Personnel No: R