566 Electrical jobs in Tuas
Electrical & Instrumentation Technician (Maintenance)
Posted today
Job Viewed
Job Description
You will provide support to the Maintenance Supervisor (E&I) to ensure all the instrument system, control and component of equipment and machinery runs smoothly and reliably of an integrated Hazardous Chemical Waste Treatment Facility and related infrastructure.
Job Description:
- Experience with electrical systems such as schematic, SLD, Layout, Control wiring drawing of MCC, DB lighting boards, soft starters / drives, earthing and lighting layouts.
- Perform daily preventative maintenance and troubleshooting on plant-wide electrical and instrumentation systems. Installation, Configuration, calibration and troubleshooting of PT, DPT, LT, TT and Mass flow meter.
- Hands on experience in BMS with HVAC, MV and LV Electrical systems.
- Conduct of inspection, testing and repair of commissioning equipment on Instrument system, control and component under the maintenance team.
- Condition monitoring and predictive maintenance of critical instruments and take corrective actions to avoid breakdown.
- Have good knowledge in megger test, PI test and gas detectors.
- Timely closure of all work orders assigned by supervisor in CMMS.
- Knowledge in creating risk assessment for non-routine jobs.
- Follow instrument maintenance work planning and scheduling including procedures.
- Ensure quality of work within the set time frame, record and report.
- Ability to work on remove and reinstall units, configuring, calibrating and maintaining control, measurement and indicating instrumentation (Pneumatic, analog and digital)
- Coordinate and liaise with contractors in supervision of statutory equipment inspection and testing at site.
- Always follow and make sure plant safety rules and regulations.
- Participate in monthly safety committee meetings.
- Conduct routine 5S at maintenance workshop, store, substations and work area at site.
- Report to the supervisor on daily work activity.
- Any other duties as assigned.
- Safety is a core value at Veolia, and a precondition for employment. You are expected to uphold the Veolia Always Safe rules and set an example to all colleagues in your daily work routine
- Ethics and compliance are two areas where our rules and our standards are strictly non-negotiable. You are expected to stick to ethics and compliance rules and standards which ultimately mean doing your job properly and conducting our business like true professionals, whatever our missions and our place in the Group.
Job Requirements:
- Diploma in Control & Instrumentation or equivalent is an advantage.
- At least 5 years of previous experience of working in electrical and instrumentation in Chemical Process or Treatment Plant Industry.
- Experience in DCS and programmable logic controls is an advantage.
- Good verbal and written communication skills.
- Good working knowledge in Microsoft applications (such as Word, Excel, PowerPoint, Project).
- Experience in using CMMS (Computerized Maintenance Management System) is an advantage.
- Ability to work weekends, holidays and respond to callouts on a non-routine basis.
Notes:
- Successful candidates will be working in the main office located at 15 Tuas View Circuit Singapore
- Incumbents must be willing to work in Tuas South vicinity.
- Company transport is provided at Boon Lay MRT and Choa Chu Kang MRT.
Electrical Design Engineer / Senior Electrical Design Engineer #78314
Posted today
Job Viewed
Job Description
Industry/ Organization Type
Manufacture of Electrical Power Distribution, Control and Automation Systems
Position Title
Electrical Design Engineer / Senior Electrical Design Engineer
Working Location
Tuas Crescent (Transportation Provided)
Working Hours
Monday – Friday, 8.15am – 5.45pm
Salary Package
Basic + AWS + Variable Bonus
Duration
Permanent
Key Responsibilities
- Lead major projects within the Design Department, accountable for the full project lifecycle and team results.
- Plan, assign, and supervise design tasks; mentor and guide the design team.
- Review and approve drawings and technical documents from the team.
- Ensure proper implementation of design controls and maintain quality standards.
- Prepare material requisition lists for projects.
- Design electrical switchboards, control panels, and consoles per client requirements and company standards.
- Create and submit approval/shop/final drawings, short circuit calculations, and instruction manuals.
- Coordinate with clients and consultants regarding technical requirements; participate in technical meetings as needed.
- Communicate technical changes and variations to Sales & Marketing for claims or contract adjustments.
- Liaise with production to follow up on design and shop drawings.
- Support Sales & Marketing with technical input and backup for contract bidding.
- Continuously improve department workflow to increase efficiency and reduce waste.
- Follow and enforce Quality Management System procedures.
- Carry out other tasks as directed by supervisors.
Requirements
- Diploma or higher in Electrical Engineering.
- Minimum 3 years of relevant experience.
- Experience in switchboard/panel design (marine or industrial) is an advantage.
Kindly apply through ANY of the following methods
- Submit your application by clicking the APPLY button;
- Email your resume to Job@anradus.com.sg. Please indicate #78314 on the email subject.
Application Policy
Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.
Anradus Pte Ltd | EA License No. 20C0161 | Rachael Lee | EA Reg No.: R
Electrical Engineer
Posted today
Job Viewed
Job Description
Job Description
- Preparation, checking and submission of drawings, catalogues and calculations for the assigned project.
- Assist Project Manager/Sr. Engineer for preparation of Vender approval submission
- Prepare and update project schedules
- Work out bill of materials and engineering deliverables.
- Attend progress/ technical meetings.
- Execution of project in accordance with general specifications, particular specifications, technical specifications and drawings, etc.
- Effective communication between engineering, technical, construction, and project control groups.
- Co-ordinate with clients, consultants, subcontractors and suppliers to ensure timely delivery of works.
- Co-ordinate with subcontractors, suppliers and own teams for implementation of the projects and ensuring it is being built correctly.
- Contributes to team effort by accomplishing related results as needed.
- Monitoring and carrying out quality check on progressive completed work.
- Develop method of statements and testing procedures for the works.
- Inspect installations and observe operations to ensure compliance with design and equipment specifications and safety standards.
- Write reports and documentations.
Requirements
- Degree in Electrical Engineering
- Minimum 5 years of working experiences in electrical installation in industrial plants
- Technical skills and knowledge of HT, LT Switchboards, Transformers, Generators, Motor Starters, Testing and Commissioning
- Familiar with relevant Singapore standards and international standards.
- Positive working attitude and ability to work in a fast-paced environment
- Meticulous with an eye for detail
- 5.5 days,
- Salary will commensurate with experience
Electrical Engineer
Posted today
Job Viewed
Job Description
Job Description
- Prepare and review the design of the Electrical Works, such as equipment sizing, cable sizing and voltage drop calculation, power system study, etc.
- Develop cost estimates for electrical equipment and electrical works.
- Develop the work schedule and coordination of the project works to ensure project is on schedule.
- Attend to FAT, supervision of the delivery, installation and testing and commissioning of electrical works.
- Handle and resolve all site technical relating matters.
- Prepare, review and assist in subcontractor design and submission, ensuring all project specifications and design standards are met.
- Prepare all relevant checklist for Installation and Testing & Commissioning Works.
- Assist and collaborate with other project team members to comply with project requirements and meet project schedules.
- Collaboration with internal stakeholders, clients, consultants, vendors and contractors.
- Attend to clients' comments and ensure clients' approval & acceptance to all Electrical Works related design, installation and Testing & Commissioning Works.
Requirements
- Degree in Bachelor Degree of Electrical Engineering.
- 2 to 5 years of relevant experience in the construction industry. Fresh graduates are welcome.
- Relevant experience in the construction industry especially in water or wastewater industry will be an advantage.
- Design, installation, testing and commissioning of the electrical works e.g., high voltage system, low voltage distribution system, transformers, motor starters, motors, cabling works, earthing and lighting protection system, small power and lighting system, etc.
- Experience in Project Execution, Project Coordination, Supervising and Coordination with sub-contractors, consultant, and Client.
- Good technical knowledge in understanding the Electrical System.
- Well versed in BIM software i.e. Bentley and Navisworks and drafting tools – AutoCad.
- Team player with good interpersonal skills.
- Meticulous and analytical with excellent problem-solving skills.
- Able to work under tight deadlines.
- Highly motivated and able to work independently with minimal supervision.
- Work full time at project site.
Electrical Engineer
Posted today
Job Viewed
Job Description
Company description:
Backed by more than 50 years of experience, we are one of the world's leading providers of turnkey shipbuilding, repair and conversion services for naval vessels. Our well-equipped shipyards in Singapore provide specialised and comprehensive services to support the end-to-end lifecycle of vessels.
We design and build a range of vessels for naval forces around the world to protect the sovereignty of boundaries and rapidly respond to evolving maritime and security threats.
From offshore support vessels to renewables and specialised crafts, we offer bespoke design and construction that aligns with our customers' operational and business needs.
Job description:
Responsibilities:
- To prepare the Technical Specification, General Arrangement Plan (GAP) and Ship Equipment List (SEL)
- To provide specialist technical assessment and analysis other in-house departments and external parties
- To participate in tests and trials; including oversea FAT
- To plan and ensure that the work for his area of specialization is carried out as per schedule
- To follow up and resolve all the design issues on all design documents promptly and timely to support the schedule
- To check working drawings and ensure that they conform to contractual technical specification, installation control documents, Classification and Statutory Rules/Regulations
- To check and ensure equipment specification, technical information, functional description document, installation control document and interface design specification are correct and properly maintained, disseminate and use for the preparation of design work activities
- To update Department head on work progress/status and shortcomings on technical issues on projects under his charge
- To ensure the quality control in the design / drawing process
- To model equipment in 2D/3D in the respective room/location
- To participate/conduct in Harbour and Sea acceptance trials
- To ensure timely issue of drawings and documents
- To perform on site checking and to resolve issues at site with various stakeholders
- To keep abreast with current technological developments and products, Classification rules, military and industrial standards and other standards relevant to design activities
Requirements:
- Degree in Electrical / Electronics Engineering
- Relevant experience in Marine or Integration work will be advantageous
- Able to use AutoCAD for purpose of equipment modelling
- Keen interest in project management and coordination for integration projects
- Able to communicate with both internal and external stakeholders
- Only Singaporeans need apply
Additional Information:
- Location: 16 Benoi Road (Island-wide transport provided)
- 5 days work week
- Working Hours: 7.25am to 5.00pm
Electrical Engineer
Posted today
Job Viewed
Job Description
Role Responsibilities:
- Conceptualize all aspects of electrial design and engineering, basis of design, scope of work, development of construction documents and execute the project with the detailed designs.
- Assist and support the Project Manager in handling and monitoring the progress of projects to ensure that work on site is on schedule.
- Liaise and coordinate project site works with consultants, vendors, suppliers and sub-contractors.
- Ensure that all works carried out exceeds industry standards and are in compliance with local legislations, QHSE requirements and other regulations.
- Arrange timely and consistent communication sessions with internal and external stakeholders.
- Manage the detailed electrical design of municipal scale wastewater treatment systems (if needed).
- Assist in proposal preparation; contract preparation and negotiation; coordination with regulatory agencies; project planning, budgeting, and scheduling.
- Able to interpret Mechanical and Electrical schematic drawings issued by the Consultant and prepare the tender proposal.
Role Requirements:
- Degree in Electrical Engineering or any equivalent qualification recognized by PEB.
- Minimum 3 to 5 years of relevant working experiences.
- Preferable infrastructure, building services, possess Environment, Water or Waste Water Engineering experiences.
- Able to communicate clearly with people at all levels about goals, responsibility, performance, expectations, and feedbacks.
- Manage various sub-contractors for Building services.
- Location: Tuas area
Electrical Drafter
Posted today
Job Viewed
Job Description
Electrical Drafter (Cranes & Lifting Equipment)
Job ID: J Mandy
Company: Crane & Lifting Equipment Manufacturer (~35 staff)
Location: Tuas Crescent (EW31), ~8-min walk, Singapore
Employment Type: Full-time (5.5-day week)
Hours: Mon–Fri 8:00am–5:00pm; Sat 8:00am–1:00pm
Rest Days: 6 days/month
Salary: S$2,800–3,000/month (basic)
Benefits: Annual Leave 14 days · Sick Leave 14 days
Work Pass: WP sponsorship may be considered (subject to quota & MOM approval)
About the Role
Produce electrical drawings for crane/hoist systems and support production/commissioning. You'll report to the Production Manager and receive guidance/training from the department's technical lead.
Key Responsibilities
- Draft electrical schematics, wiring diagrams, single-line diagrams and panel/layout drawings in AutoCAD
- Convert wiring information into clear electrical layout and terminal plans
- Prepare/update BOM, drawing registers and as-built documentation; manage revisions
- Ensure drawings comply with internal standards and applicable codes
- Coordinate with production/technicians and suppliers on technical clarifications
- Provide basic drafting support for installation/commissioning when required
Requirements
- Diploma or above in Electrical/Electronics/Mechatronics (or related)
- Proficient with AutoCAD for electrical drafting
- Foundation in motor control circuits / electrical drafting or related field
- Able to read electrical symbols/standards; basic MS Office for documentation
- Detail-oriented, organised, and able to follow SOPs and safety requirements
- Experience in cranes/industrial automation is a plus; training provided for suitable candidates
Nice to Have
- Exposure to AutoCAD Electrical / EPLAN, panel layout, or site measurement
Interview
Video or on-site interview.
Work Authorisation & Commute
Role is on-site in Singapore. Candidates currently in Singapore or able to commute daily from Malaysia are welcome.
How to Apply
Apply via Indeed with your resume and (if available) sample drawings. Shortlisted candidates will be contacted for next steps.
Job Type: Full-time
Pay: $, 3,000.00 per month
Education:
- Local Polytechnic Diploma (Preferred)
Experience:
- AutoCAD: 1 year (Preferred)
Work Location: In person
Be The First To Know
About the latest Electrical Jobs in Tuas !
Manufacturing Engineer, Electrical
Posted today
Job Viewed
Job Description
Work Schedule
Standard (Mon-Fri)
Environmental Conditions
Office
Job Description
Job Description
When you're part of the team at Thermo Fisher Scientific, you'll do important work. And you'll have the opportunity for continual growth and learning in a culture that empowers your development. With revenues of more than $40 billion and the largest investment in R&D in the industry, we give equal opportunity to our people on the resources and chances to create significant contributions to the world.
Discover Impactful Work
- Manufacturing engineer is responsible for product and manufacturing operation process throughout product life cycle. Maintain and ensure systems and procedures are in compliance with ISO and Regulatory requirements.
- Support New Product Introduction (NPI) and product transfers from R&D and other manufacturing sites. Plan and ensure smooth start up of new product transfers to production.
- Provide Product second level failure analysis, cost reduction through value engineering activity. Set up and maintain Bill of materials (BOM) and drawings in SAP, and manage changes through OCPLM.
- Provide Sustaining Engineering support such as improving manufacturing First Pass Yield (FPY), support manufacturing process improvement and evaluating alternate parts for End of Life (EOL) replacement.
- Provide Engineering support to functional tester development and sustaining at contract manufacturer site.
Education / Experience
- Degree in Engineering (Electrical or equivalent) with more than 3 years working experience, preferably in manufacturing environment.
- Experience in life science/ medical devices in the engineering function.
Knowledge, Skills, Abilities
- Good troubleshooting skill in PCBA and instrument level
- Test programming knowledge/experience (e.g. LabVIEW/TestStand, VC++, C#) will be added advantage
- Good knowledge on engineering change process (e.g. OCPLM CR/CO process)
- Have good communication, analytical capability, and good spoken and written English skill
Benefits
We offer competitive remuneration, annual incentive plan bonus, healthcare, and a range of employee benefits. Thermo Fisher Scientific offers employment with an innovative, forward-thinking organization, and outstanding career and development prospects. We offer an exciting company culture that stands for integrity, intensity, involvement, and innovation
Electrical Technician Specialist
Posted today
Job Viewed
Job Description
We are the makers of possible
BD is one of the largest global medical technology companies in the world. Advancing the world of health is our Purpose, and it's no small feat. It takes the imagination and passion of all of us—from design and engineering to the manufacturing and marketing of our billions of MedTech products per year—to look at the impossible and find transformative solutions that turn dreams into possibilities.
Why Join Us?
A career at BD means learning and working alongside inspirational leaders and colleagues who are equally passionate and committed to fostering an inclusive, growth-centered, and rewarding culture. You will have the opportunity to help shape the trajectory of BD while leaving a legacy at the same time.
To find purpose in the possibilities, we need people who can see the bigger picture, who understand the human story that underpins everything we do. We welcome people with the imagination and drive to help us reinvent the future of health. At BD, you'll discover a culture in which you can learn, grow and thrive. And find satisfaction in doing your part to make the world a better place.
Become a maker of possible with us
Job Summary
Provide technical expertise to support manufacturing in leading machine enhancement, managing preventive maintenance, troubleshooting, repair and maintenance of machines, project execution, accountability on production waste and quality of all machine tools operations and the overall technician resource management in production.
Must be able to commit day shift 7am to 7pm. (Shift Pattern 3/4/4/3). During training period, you will be on day shift 7:00am to 4:00pm.
Main Responsibilities
- Maintain machines to meet production output, and other metrics like quality, waste etc.
- Perform Preventive Maintenance (Cleaning, Service, Replace)
- Perform troubleshooting of machine and tools, equipment failures to meet production targets, safety and quality standards and/or specifications
- Perform product/machine changeover on the line by tool/die change and machine set-up
- Initiate, Implement and follow-up on machine enhancement and project assignments
- Write Standard Work Instruction / Procedure for assigned operation / process
- Implement Corrective and Preventives Actions
- Participate in training and coaching of Technicians and new hires on skills and knowledge on machine operations and adjustments
- Assist Engineers or Subject Matter Experts for any CI activities.
- Ability to interpret electrical or electronics wiring or schematic diagrams.
- Basic knowledge with Programmable Logic Controllers (eg. Omron or Allen Bradley).
Job Requirements
- 1-2 years' experience in Electrical aspect - Electrical Control & Automation.
- Must be able to commit 12 hours day shift 7am to 7pm. (Shift Pattern 3/4/4/3)
- Basic knowledge/experience working with PLC (e.g. Omron or Allen Bradley) is an advantage.
- Ability to interpret electrical or electronics wiring or schematic diagrams.
- Ability to interpret pneumatic diagrams.
- Ability to carry out troubleshooting for machineries issues related to electrical, electronic components or pneumatic components.
- Sound knowledge and understanding of various types of sensors (reflective, proximity etc.) and switches for assembly lines application.
Culture and Benefits
Here at BD, we embrace a growth mindset, building capabilities for the future and helping you become the best version of yourself. We offer our employees a clear direction and career pathway for development. We pride ourselves on our transparent and rigorous talent processes that are inclusive, deeply embedded in trust, aligned with our culture, and enable us to achieve strategic imperatives of the organization. Our leaders are committed, engaged and accountable to making talent our top priority.
How To Apply
Submit your application by clicking on the "apply" button at the top of the page.
licensed electrical worker
Posted today
Job Viewed
Job Description
The Licensed Electrician is authorised under the Energy Market Authority (EMA) to carry out, endorse, and take responsibility for electrical installation, operation, and maintenance works up to 1,000 volts (Low Voltage). This role ensures safe execution of electrical works in compliance with statutory regulations, codes of practice, and workplace safety standards.
Key Responsibilities
- Installation & Maintenance
- To assist on the safety compliance on installation, maintenance, repair, and testing of low-voltage (≤1 kV) electrical systems (e.g., wiring, distribution boards, lighting, power outlets, earthing, small generators, and solar PV up to LV).
- To assist Operations and Maintenance Team to troubleshoot and rectify electrical faults to restore safe operation.
- Regulatory Compliance and inspection.
- Endorse and submit periodic inspection/test certificates for Electrical tools for company.
- Ensure all works comply with the Electricity Act, EMA licensing conditions, and Singapore Standards (SS, CP codes).
- Safety & Risk Management
- Implement Lock-Out Tag-Out (LOTO) and Permit-to-Work procedures for LV electrical maintenance works.
- Ensure compliance with the Workplace Safety and Health (WSH) Act and electrical safety codes.
- Supervision & Coordination
- Supervise electricians and contractors performing electrical work
- Coordinate with clients, facility managers, and authorities on LV electrical works.
Requirements
- Licensed Electrical Worker (Electrician Licence) issued by EMA Singapore.
- NITEC/Higher NITEC/Diploma in Electrical Engineering or equivalent qualification.
- Good knowledge of LV distribution systems, Singapore Standards (SS638, CP5, etc.), and WSH safety requirements.
- At least 3–5 years of practical experience in electrical installation and maintenance.
- Strong troubleshooting, communication, and safety awareness.
Job Type: Full-time
Pay: $3, $4,500.00 per month
Work Location: In person