1,659 Vessel Engineer jobs in Singapore

Responsibilities
Follows established procedures and guidelines to design, install products and services that is required by the Organisation / Client.
Reviews / implements project / job specification.
Carry out basic and detailed engineering design including calculations / analysis as per project requirements.
Prepares detailed material take-off for project procurement and tender proposals.
Assists in preparing cost estimate for tender proposal.
Coordinates and cooperates with other disciplines on new process requirements, design interference check and design changes
Adheres to ISE, Client and International Standards quality requirements in the execution of works as applicable.
Instructs, supervises, manages and monitors the Designers in the course of work.
Provides technical assistance to Construction Team
Attends to Site checks / verification
Requirements
Degree in Mechanical Engineering
Familiar with related industrial code and standard such as API 650, API 620, EN14015, ASME Section VIII, division 1 or 2.
Minimum of 3 years in the relevant working experience in design and drafting of tanks and pressure vessels in the Oil & Gas, Petrochemical Industries.
Computer literate and good hands-on experience on applications such as Microsoft Office, Auto CAD and tank software.
Matured personality and being able to work independently
Good interpersonal, time management and decision making skills
#J-18808-Ljbffr

Duties and Responsibilities
Follows established procedures and guidelines to design, install products and services that is required by the Organisation / Client.
Reviews / implements project / job specification.
Carry out basic and detailed engineering design including calculations / analysis as per project requirements.
Prepares detailed material take-off for project procurement and tender proposals.
Assists in preparing cost estimate for tender proposal.
Coordinates and cooperates with other disciplines on new process requirements, design interference check and design changes
Adheres to ISE, Client and International Standards quality requirements in the execution of works as applicable.
Instructs, supervises, manages and monitors the Designers in the course of work.
Provides technical assistance to Construction Team
Attends to Site checks / verification
Requirements
Degree in Mechanical Engineering
Familiar with related industrial code and standard such as API 650, API 620, EN14015, ASME Section VIII, division 1 or 2.
Minimum of 3 years in the relevant working experience in design and drafting of tanks and pressure vessels in the Oil & Gas, Petrochemical Industries.
Computer literate and good hands-on experience on applications such as Microsoft Office, Auto CAD and tank software.
Matured personality and being able to work independently
Good interpersonal, time management and decision making skills
#J-18808-Ljbffr

• Basic $3300 - $4800 + Variable Bonus + Allowances
• Excellent Welfare and Benefits + Career progression
• Working location: West
• Working hours: 8:30am – 5:30pm (Mon – Fri)
• Mechanical Engineering - Training Provided

Job Responsibilities:

• Planning / Assign sub-contractors and manpower for the maintenance work and from project handover
• Supervising & Managing of Sub-contractor to carry maintenance & servicing works
• Plan and schedule Preventive Maintenance
• Perform routine check, system back-ups & restoration, troubleshooting and upgrading / improvement of system to ensure optimal functioning of BMS//DCS//PLC//SCADA System
• Record servicing & maintenance data and generate service report
• Provide Technical / Operational guidance, engineering solution to the Maintenance Site Facility Management

Requirements:

• Diploma/Degree in Mechanical Engineering or Electrical Engineering or any related discipline
• Training will be provided for candidate without or with lesser experiences

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

NG DIAUM YEE (R

EA Recruitment Pte Ltd

EA License No: 21C0492

ABOUT BeeX

BeeX is building the world's most advanced Hovering Autonomous Underwater Vehicles (HAUVs).

BeeX specialises in providing autonomous robotics solutions to safeguard underwater infrastructure in the maritime, energy and defense sectors, reducing over 90% of carbon emissions. We are pioneering Autonomous Robotics-as-a-Service (ARaaS) on a global scale, supported by decades of operational experiences in harsh waters. With unprecedented efficiency, we strive to provide our customers with a one-point solution for asset integrity management - protecting assets they value, making sure they stay safe.

Why Join Now

The industries we serve need new ways to overcome their current challenges, and BeeX sees the opportunity in delivering exactly that, right now. Creating anything new is very hard, and we need outstanding people.

At BeeX, everyone is dependent; united by enthusiasm for bold innovation. Our multi-disciplinary team thrives in dynamic environments, driving transformative advancements globally. Join us to make a meaningful impact on the world

You will enjoy this job if you:

• Enjoy product design and are always thinking of how to build something better.

• Want to work in fast-paced start-up environment, prioritising growth over short-term gains.

• Like to work independently, as well as collaboratively with team members in other sub-teams.

• Have a positive learning mindset, and can quickly absorb knowledge to overcome challenges.

• Can assess risk and make time-critical decisions/tradeoffs in imperfect scenarios.

Job Scope

You will report directly to the Hardware Lead. Your daily schedule will include frequent interactions with a multi-disciplinary team, and you need to be equally comfortable working at sea trials and a normal desk in the office. You will need to work in Singapore.

• Design and Implement overall Mechanical Systems of Autonomous Platforms: Hovering Autonomous Underwater Vehicle (HAUVs)

• Design of mechanical components, mechanisms and electronics housings in CAD.

• Conduct Finite Element Analysis Simulation on design components for structural integrity and stress failure assessment.

• Drafting of 2D drawings for fabrication and assembly.

• Assembly and testing of designed mechanical components in the workshop and testing in real world environments.

• Sail out to sea for testing and evaluation of completed mechanical designs and other robotic systems.

• Gather user requirements in collaboration with management team and customers.

• Establish test procedures for mechanical quality control and regulatory compliance.

Desired Qualities and Skillsets

• B.Eng in Engineering (Mechanical), or related experience.

• 0-3 years of experience in mechanical product design from concept to product delivery to customers.

• Proficient in SolidWorks or equivalent engineering CAD design software.

• Experienced with prototyping and various manufacturing methods ranging from 3D printing, laser cutting, CNC, welding, composites etc.

• Experienced with Finite Element Analysis and Computational Fluid Dynamics simulation modelling such as SolidWorks, ANSYS, OpenFOAM or equivalent simulation software.

• Experienced with corrosion control methods and thermal design methods is a plus.

Remuneration Package

• Market competitive salary

• Growth opportunities that align with your direct ability in helping the company, rather than an arbitrary corporate ladder

• ESOP / equity participation

• Healthcare support

• Special access to industry events

• Support for skills upgrading / learning credits

• Maintain and troubleshoot TBMs, pumps, compressors, and slurry systems used in tunnel construction.
• Oversee installation and upkeep of tunnel ventilation and environmental monitoring systems.
• Support TBM excavation operations and ensure face pressure stability.
• Coordinate with site teams on mechanical interfaces and document maintenance activities.
• Ensure all mechanical systems comply with MOM, LTA, and internal safety regulations.

Requirements:

• Degree in Mechanical Engineering or equivalent
• At least 3 years of experience with TBMs, slurry separation, and ventilation systems in tunnelling or underground construction.
• Hands-on knowledge of mechanical systems including hydraulics, pneumatics, and instrumentation.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to -

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at

EA Licence: 19C9701

Registration: R

Are you passionate about 3D CAD designing, element development and sustainable materials, while love facing challenges where the solutions are not up front?

Bring your curiosity, adaptability and investigative approach into play and help us finding new element solutions to create the sustainable LEGO bricks of tomorrow

• As an Element Developer you will be in charge of building LEGO Bricks using NX software as the core function.
• Responsible to take the LEGO Reorder Elements from the technical specifications phase to the technical design freeze.
• Responsible for material, form, fit and function of LEGO brick.
• Ensure elements are delivered on time, on cost, in good quality, and in consistency to the LEGO standards.
• Ensure the right technical solution and make sure we are keeping the ED standards into the LEGO mould setup.
• Understand all LEGO connectors, materials and functions.
• Share and enforce your specialist knowledge with key partners.
• Cultivate a positive culture in mould design focusing on collaboration, LEAN practices and productivity

EDR (Element Development Reorder) is a part of EED (Existing Element Development) belonging to Element & Moulds Engineering. which falls under Engineering & Quality, a vital part of LEGO Operations.

We develop existing LEGO bricks, engineering them to comply to the highest quality standards and ensure they fit in the best mould solutions. This includes drafting and maturing of elements for production using NX software, creating technical specifications and documentation.

A high quality output and an accurate delivery is key to us, and we strive continuously to improve in this area to raise the bar even further. We value an informal and believing work environment where empowerment of the employees are in focus.

Do you have what it takes?

• Mechanical Engineer, Plastic Engineer. CAD developer.
• Toolmaker, Tool Technician background valued.
• Experience from similar position as a mechanical part designer for plastic components for at least 3-5 years.
• Experience within CAD tools, designing of plastic components elements, understanding in regards to injection moulding and tool construction.
• End 2 end perspective of value chain needed for creation of high quality elements and moulds.
• Project Management Skills desired.
• Design in 3D CAD system (NX)
• Availability to travel 5% of time.
• Strong collaboration and communication skills
• Detail oriented with focus on quality
• Change ready as we are working in a dynamic and fast environment
• Continuously improvement mindset
• Proficient in English

Children are our role models. Their curiosity, creativity and imagination inspire everything we do. We strive to create a diverse, dynamic and inclusive culture of play at the LEGO Group, where everyone feels safe, valued, and they belong.

The LEGO Group is proud to be an equal opportunity employer. We are committed to equal employment opportunity and equal pay regardless of e.g. race, colour, religion, sex, national origin, sexual orientation, disability or gender identity.

The LEGO Group is fully committed to Children's Rights and Child Wellbeing across the globe. Candidates offered positions with high engagement with children are required to take part in Child Safeguarding Background Screening, as a condition of the offer.

Thank you for sharing our global commitment to Children's Rights.

Build your career brick by brick at the LEGO Group.

"If you are motivated by being a part of the sustainability journey and finding new solutions to move this agenda, this is the right job for you"

Applications are reviewed on an ongoing basis. However, please note we do amend or withdraw our jobs and reserve the right to do so at any time, including prior to any advertised closing date. So, if you're interested in this role we encourage you to apply as soon as possible.

What's in it for you?

Here is what you can expect:

Family Care Leave - We offer enhanced paid leave options for those important times.

Insurances – All colleagues are covered by our life and disability insurance which provides protection and peace of mind.

Wellbeing - We want our people to feel well and thrive. We offer resources and benefits to nurture physical and mental wellbeing along with opportunities to build community and inspire creativity.

Colleague Discount – We know you'll love to build, so from day 1 you will qualify for our generous colleague discount.

Bonus - We do our best work to succeed together. When goals are reached and if eligible, you'll be rewarded through our bonus scheme.

Workplace - When you join the team you'll be assigned a primary workplace location i.e. one of our Offices, stores or factories. Our hybrid work policy means an average of 3 days per week in the office. The hiring team will discuss the policy and role eligibility with you during the recruitment process.

Children are our role models. Their curiosity, creativity and imagination inspire everything we do. We strive to create a diverse, dynamic and inclusive culture of play at the LEGO Group, where everyone feels safe, valued and they belong.

The LEGO Group is highly committed to equal employment opportunity and equal pay and seeks to encourage applicants from all backgrounds (eg. sex, gender identity or expression, race/ethnicity, national origin, sexual orientation, disability, age and religion) to apply for roles in our team.

The LEGO Group is fully committed to Children's Rights and Child Wellbeing across the globe. Candidates offered positions with high engagement with children are required to take part in Child Safeguarding Background Screening, as a condition of the offer.

Thank you for sharing our global commitment to Children's Rights.

Just imagine building your dream career.

Then make it real.

Join the LEGO team today.

Company

Trilogy Technologies Pte Ltd

Designation

Mechanical Engineer / Designer

Date Listed

17 Jul 2025

Job Type

Entry Level / Junior Executive, Experienced / Senior Executive

Full/Perm

Job Period

Immediate Start, Permanent

Profession

Engineering

Industry

Electronics

Location Name

Ang Mo Kio Avenue 5, Singapore

Address

Ang Mo Kio Ave 5, Singapore

Map

Allowance / Remuneration

$3,250 - 5,000 monthly

Company Profile

Trilogy Technologies is both a design and manufacturing company. We have both customer and in-house R&D projects. We are currently embarking on a few very exciting and challenging projects which can be extremely rewarding upon completion.

Job Description

• Candidate must be creative and produce innovative design that is ergonomic and design for manufacturing (DFM).

• Ability to take design and work through with the team to formalize the mechanical drawing for production

• Ability to create design that captivate and solve customer problems

• Strong interest in transforming design to manufacturing and seeing through the realization of produced parts.

• Strong knowledge of Solidworks and/or SolidCam a must

• knowledge of machining a plus

• highly passionate with design and adaptive in working in a fast pace environment

Application Instructions

Please apply for this position by submitting your text CV using InternSG.

Kindly note that only shortlisted candidates will be notified.

Apply for this position

Engineer researches, designs, develops, tests, and maintains mechanical systems and devices like machines, engines, and tools, using knowledge of physics and math to solve problems . Key duties include creating designs with computer-aided design (CAD) software, analyzing performance data, overseeing manufacturing, ensuring safety and efficiency, and collaborating with teams and clients. Mechanical engineers work in diverse industries such as manufacturing, aerospace, and medical device development

Key Responsibilities

• Support Engineering Directors in the development of internal mechanical design

concepts, including HVAC, ACMV, chilled water, CRAC/CRAH, and other cooling systems

for mission-critical facilities.

• Review and provide technical feedback on consultant mechanical submissions to ensure

compliance with project requirements, industry standards, and best practices.

• Assist in site planning, coordination of mechanical services with electrical, civil, and

architectural teams, and integration of mechanical systems into overall data center

design.

• Provide subject matter expertise throughout the project lifecycle – from conceptual

design and detailed engineering through installation and commissioning.

• Evaluate and optimize system efficiency, reliability, and sustainability, including energy-

efficient cooling strategies and mechanical redundancy (N+1, 2N).

• Work closely with multidisciplinary stakeholders to deliver high-quality, scalable

mechanical designs that meet uptime and operational requirements.

Requirements

• Minimum 5 years of experience in the data center industry, with strong background in

mechanical design and/or commissioning.

• Proven expertise in HVAC/ACMV systems, chilled water plant design, air distribution,

and mechanical infrastructure for large-scale projects.
• Strong knowledge of ASHRAE, NFPA, SMACNA, and local building codes relevant to

mechanical systems in mission-critical facilities.

• Experience with energy modeling, CFD analysis, or sustainability assessments is an

advantage.

• Prior project exposure in Singapore, Australia, India, or Japan is advantageous.

• Strong problem-solving, communication, and stakeholder management skills.

• Willingness to travel regionally as needed.

• Based in Singapore (no prior Singapore experience required).