1,463 Vehicle Electronics jobs in Singapore

A world empowered by autonomy. We build robotic vehicles to improve logistics safety, forge a greener Earth, and enhance human lives.
We are a closely-knit team aspiring to change the world through disruptive technology. We are innovators. We are tinkerers. We are problem-solvers. And we have a fair amount of magic dust up our sleeves. We have a plan for fleet-level deployment of autonomous vehicles, and we are looking for the best-of-the-best to join us in making this a reality.
About Venti Technologies
Based in the U.S. and Asia, Venti Technologies is the leader in safe-speed autonomous logistics systems, developing the future of goods transportation. Using rigorous mathematics, deep learning, and theoretically-grounded algorithms, Venti has a proprietary collection of autonomy technologies including a suite of powerful logistics algorithms. Venti’s proven value proposition of saving costs, increasing vehicle utilization, and improving safety is recognized by customers and driving growth. Launched in 2018, Venti brings together an unsurpassed team internationally. The company has autonomous systems deployed in Asia for industrial and logistics sites and a growing pipeline. Venti has offices in Cambridge (Massachusetts, USA), Suzhou (China), and Singapore – our Asian headquarters.
The Autonomous Vehicle Engineer will work, as part of our cross-functional and
world-class engineering team, to design drive-by-wire and sensor suite systems, and retrofit such systems to any vehicle, turning them into high-tech self-driving ones!
Role responsibilities
Assist senior engineers in the design, development & maintaining of drive-by-wire systems – replace traditional mechanical, hydraulic or pneumatic control systems with custom made electronic control systems for steering, braking, throttle and gear shifting. Ensure the developed system is fail safe & includes redundancy.
Assist senior engineers in the design, development& maintaining of in house custom PCB boards for power distribution, general data acquisition & control and supplementary functionalities.
Assist senior engineers in the development of a fully functional sensor suite layout, including LiDAR, cameras, ultrasonic sensors, RTK/IMU & more – work with a multi-disciplinary team, including software engineers, mechanical engineers, research scientists & systems engineers to ensure sensor suite meets requirements of all stakeholders.
Assist and support senior engineers in the design for Wire Harnesses – produce top quality harness designs optimized for routing, fabrication & maintenance.
Assist senior engineers in the evaluation & the selection of suppliers and vendors – assess suppliers based on quality, reliability, cost and support while managing timelines and ensuring deliverables meet specifications.
Conduct bench and vehicle level testing of electrical and electronics systems to validate functionality and performance. Identify and resolve issues related to designs, wirings, and components.
Required Experience
Bachelor’s or Master’s degree in Electrical Engineering, Electronics Engineering or related fields
1 to 3 years experience in PCB design, Electrical design & Harness design
Fundametal knowledge of drive-by-wire systems, sensor suites and compute systems
Experience with CANbus and other vehicle network protocols
Flexible problem-solver, ability to adapt to evolving requirements & ambigous situations.
Familiarity with process documentation.
Salary is commensurate with experience. We also offer world-class benefits, fantastic culture, flexible working arrangements, and a great international working environment. Come and join us!
#J-18808-Ljbffr

A world empowered by autonomy. We build robotic vehicles to improve logistics safety, forge a greener Earth, and enhance human lives.
We are a closely-knit team aspiring to change the world through disruptive technology. We are innovators. We are tinkerers. We are problem-solvers. And we have a fair amount of magic dust up our sleeves. We have a plan for fleet-level deployment of autonomous vehicles, and we are looking for the best-of-the-best to join us in making this a reality.
About Venti Technologies
Based in the U.S. and Asia, Venti Technologies is the leader in safe-speed autonomous logistics systems, developing the future of goods transportation. Using rigorous mathematics, deep learning, and theoretically-grounded algorithms, Venti has a proprietary collection of autonomy technologies including a suite of powerful logistics algorithms. Venti’s proven value proposition of saving costs, increasing vehicle utilization, and improving safety is recognized by customers and driving growth. Launched in 2018, Venti brings together an unsurpassed team internationally. The company has autonomous systems deployed in Asia for industrial and logistics sites and a growing pipeline. Venti has offices in Cambridge (Massachusetts, USA), Suzhou (China), and Singapore – our Asian headquarters.
The Senior Autonomous Vehicle Engineer will work, as part of our cross-functional and
world-class engineering team, to design drive-by-wire and sensor suite systems, and retrofit such systems to any vehicle, turning them into high-tech self-driving ones!
Role responsibilities
Lead the design, development, and integration of wire harness systems for diverse applications.
Generate detailed schematics and layouts for wire harnesses using tools like SOLIDWORKS Electrical.
Partner with cross-functional teams to streamline system integration efforts.
Perform testing and analysis to troubleshoot issues and select optimal materials & parts.
Ensure all designs comply with safety protocols and industry standards.
Coordinate with suppliers and provide technical expertise during manufacturing and testing.
Create comprehensive documentation, including design specifications and testing reports.
Support project planning by outlining objectives, timelines, and deliverables.
Required Experience
Bachelor’s or Master’s degree in Electrical Engineering or related fields
4 to 6 years experience in electrical design & harness design
Fundametal knowledge of drive-by-wire systems, sensor suites and compute systems.
Experience with CANbus and other vehicle network protocols.
Flexible problem-solver, ability to adapt to evolving requirements & ambigous situations.
Familiarity with IPC standards & process documentation.
Salary is commensurate with experience. We also offer world-class benefits, fantastic culture, flexible working arrangements, and a great international working environment. Come and join us!
#J-18808-Ljbffr

Job Description
Develop control solution related to Semiconductor equipment.
Design electrical system includes interlock, power distribution, digital/analog signal, I/O, etc
Manage external vendors or contractors to deliver sub-systems that meet design specification and reliability
Responsible for equipment safety, manage equipment compliance and certification on standards such as SEMI, CE, etc
Integrate and test subsystems
Job Requirements
Bachelor’s Degree in Electrical Engineering or equivalent, with at least 3 years working experience in electrical system design.
Familiar with AC & DC application, motors, sensors, etc
Experience in semiconductor equipment industry or high precision automation equipment industry is advantageous.
Familiar with communication protocol, such as Ethernet, RS232, etc
Strong diagnostic skills and capable of resolving electrical noise, grounding, and signal integrity issues
Experience in Electrical CAD tools
Knowledge of automation and control loops
Knowledge of designing and documenting cables
Experience in safety and electrical regulatory compliance such as SEMI, CE, etc
Experience in PCB design is an advantage
Job Benefits
5 days work week
Group Medical Insurance
Only shortlisted candidates will be notified
Starting salary depending on experience
#J-18808-Ljbffr

Job Description
The candidate will be responsible for designing and drafting the electrical and instrumentals systems of ships and offshore platform independently. The candidate will interact with Clients, Classification and Statutory bodies and Vendors in the process of design. Candidate to be able to prepare the following drawings independently:
Electrical Load
Single Line Diagram
Short-Circuit Calculation
Lighting Arrangement
Transformer Load Analysis
Cable Estimation
Desired Profile
Min 5 years’ experience of which at least 3 years should be in Marine Design.
He/She should be conversant with Ship electrical system and classification rules and IEE.
Skills in Excel, Electrical design software and CAD-tools is required.
Requirements
Degree in Electrical Engineering
Excellent Communication Skills
Conversant in Design of Electrical and Hybrid Propulsion systems, including batteries, battery charging systems etc.
#J-18808-Ljbffr

• Mentoring of Electrical engineers during tendering, design and construction phase based on best practices defined in the engineering efficiency checklist
• Implementing the design checklist and tracking progress based on schedule developed
• Prepare electrical tender packages including specification and drawings
• Provide design requirement and coordinate with designers for preparation of Design, Tender and Construction drawings
• Provide constructive feedback to Lead Engineer regarding design, site issue’s, compliance, client demand / request etc
• Responsible for ensuring to remain familiar with current practices and engineering trends within the industry and to remain technically competent
• Tendering and estimating of electrical works for projects prior to award
• Compiling lesson learnt and briefing Head of Department (HOD), updating Lesson Learnt register accordingly
• Compilation and Review of Operation and Maintenance Dossier for Projects
• In the absence of a Project based Lead Engineer, the Senior Engineer shall assume the role and responsibilities assigned to the Lead Engineer position
• In the absence of a Project based Engineer, the Senior Engineer shall assume the role and responsibilities assigned to the Engineer position
• Promote safe working practices and to protect the health and well-being of Employees, Subcontractors and Customers
• Undertake the assigned work scope in a professional and responsible manner
• Fully awareness of his / her scope of work and the extent of the obligations.
• Lead the Electrical Design on large scale projects during the design and construction phase
• Design of High Voltage switchgear and Low Voltage switchboards, VFD and Motor Starter systems, transformer, generators, High Voltage and Low Voltage Cable systems, Lighting, Small power, Lightning Protection, Earthing, Power Scada, Dynamic and Static UPS systems for Clean rooms, Industrial Facilities and Commercial Buildings
• Carry out design calculation deemed necessary for executing the project, which includes, short circuit calculation, load flow, equipment sizing, cable sizing, lighting calculation
• Evaluate Lightning Protection Risk Assessment Report
• Develop & review electrical related drawings, e.g. Single Line Diagram, VFD and Motor Starter Schematic, Equipment layout, Cable ladder/tray routing layout
• Execute / Expedite electrical packages during construction phase of a project and take responsibility for the packages assigned
• Involve in daily coordination with internal C&S and BIM team to resolve all the clashes, penetration etc.

Minimum Qualification:

• Bachelor Degree in Electrical Engineering
• With 6- 8 years of relevant experience in design and in construction management for electrical projects
• Experienced in high tech industry with large scale electrical power systems involved in testing and commission activities.
• Basic Knowledge of operating Power Management System Software (ETAP) and short circuit calculation
• Technical knowledge and understanding of Engineering Design and Construction for High Voltage and Low Voltage Electrical systems from Preliminary Design to Commissioning and Handover
• Technical knowledge and understanding of project execution processes in a fast track environment
• Extensive knowledge of Relevant code of practices, statutory requirements, IEC, NEMA and NFPA standards for design implementation
• Extensive local construction knowledge
• BIM and ACC platform

Job Description

• Develop control solution related to Semiconductor equipment.

• Design electrical system includes interlock, power distribution, digital/analog signal, I/O, etc

• Manage external vendors or contractors to deliver sub-systems that meet design specification and reliability

• Responsible for equipment safety, manage equipment compliance and certification on standards such as SEMI, CE, etc

• Integrate and test subsystems

Job Requirement

• Bachelor’s Degree in Electrical Engineering or equivalent, with at least 3 years working experience in electrical system design.

• Familiar with AC & DC application, motors, sensors, etc

• Experience in semiconductor equipment industry or high precision automation equipment industry is advantageous.

• Familiar with communication protocol, such as Ethernet, RS232, etc

• Strong diagnostic skills and capable of resolving electrical noise, grounding, and signal integrity issues

• Experience in Electrical CAD tools

• Knowledge of automation and control loops

• Knowledge of designing and documenting cables

• Experience in safety and electrical regulatory compliance such as SEMI, CE, etc

• Experience in PCB design is an advantage

Job Benefits

• 5 days work week

• Group Medical Insurance

Only shortlisted candidates will be notified

Starting salary depending on experience

Job ID: 19690

Location:
ST Electronics Hub, SG

Description:

About ST Engineering

ST Engineering is a global technology, defence, and engineering group with offices across Asia, Europe, the Middle East, and the U.S., serving customers in more than 100 countries. The Group uses technology and innovation to solve real-world problems and improve lives through its diverse portfolio of businesses across the aerospace, smart city, defence, and public security segments. Headquartered in Singapore, ST Engineering ranks among the largest companies listed on the Singapore Exchange.

Our history spans more than 50 years, and our strategy is underpinned by our core values – Integrity, Value Creation, Courage, Commitment and Compassion. These 5 core values guide every aspect of our business and are embedded in our ST Engineering culture – from the people we hire, to working with each other, to our partners and customers.

About our Business

Our Unmanned & Integrated Systems business offers holistic solutions in system engineering and integration. We pioneer maritime robotics and autonomy solutions, provide system integration for complex naval and island air defence System-of-Systems (SoS), and take care of the operation and maintenance of Command, Control, Communications, Computers Intelligence (C4I) systems. We cater to the needs of Defence, Public Safety & Security, and Commercial clients worldwide, providing seamless and innovative services that redefine possibilities.

Together, We Can Make A Significant Impact

We are a pioneering company at the forefront of revolutionizing maritime technology. Our mission is to develop autonomous solutions that empower naval vessels to perform a diverse range of missions with unparalleled efficiency and effectiveness. From intelligence gathering to reconnaissance, surveillance, and beyond, we are dedicated to evolving technology to meet the evolving needs of modern naval operations.

We are looking for a creative, resourceful Electrical Engineer to join us. You will be responsible for conceptual / detailed design and will have the opportunity to participate in prototyping, installation, and testing of their design. This role requires good technical writing skills to produce documentation for submission. You will work with a multi-disciplinary team and be exposed to interactions with customers, partners, vendors, and sub-contractors. Experience in maritime industry and power supply design is preferred.

Be Part of Our Success

• Design, implement, integrate, and test electrical systems including selection of components, power distribution, and wiring for maritime vessels (boats).
• Source and manages suppliers / OEMs for power design & implementation.
• Collaborate with cross-functional teams of engineers and stakeholders to ensure that electrical systems meet design requirements.
• Develop and maintain electrical system specifications, design documents, and other technical documentation.
• Identify, analyze, and resolve design issues and technical problems related to electrical systems.
• Participate in design reviews and provide technical guidance and support to other team members.
• Ensure that electrical systems comply with industry standards and regulations, including safety standards.

Qualities We Value

• Knowledge in Electrical Engineering or a related field.
• Proven experience in electrical design and development for autonomous vehicles, robotics, or marine systems will be an advantage.
• Strong knowledge of electrical engineering principles and practices.
• Strong analytical and problem-solving skills.
• Excellent communication and interpersonal skills.
• Ability to work effectively in a team environment.
• Open to contract, renewal

Our Commitment That Goes Beyond the Norm

• An environment where you will be working on cutting-edge technologies and architectures.
• Safe space where diverse perspectives are valued, and everyone's unique contributions are celebrated.
• Meaningful work and projects that make a difference in people's lives.
• A fun, passionate and collaborative workplace.
• Competitive remuneration and comprehensive benefits.

Working Location: Ang Mo Kio

Job Description

• Preparation, checking and submission of drawings, catalogues and calculations for the assigned project.
• Assist Project Manager/Sr. Engineer for preparation of Vender approval submission
• Prepare and update project schedules
• Work out bill of materials and engineering deliverables.
• Attend progress/ technical meetings.
• Execution of project in accordance with general specifications, particular specifications, technical specifications and drawings, etc.
• Effective communication between engineering, technical, construction, and project control groups.
• Co-ordinate with clients, consultants, subcontractors and suppliers to ensure timely delivery of works.
• Co-ordinate with subcontractors, suppliers and own teams for implementation of the projects and ensuring it is being built correctly.
• Contributes to team effort by accomplishing related results as needed.
• Monitoring and carrying out quality check on progressive completed work.
• Develop method of statements and testing procedures for the works.
• Inspect installations and observe operations to ensure compliance with design and equipment specifications and safety standards.
• Write reports and documentations.

Requirements

• Degree in Electrical Engineering
• Minimum 5 years of working experiences in electrical installation in industrial plants
• Technical skills and knowledge of HT, LT Switchboards, Transformers, Generators, Motor Starters, Testing and Commissioning
• Familiar with relevant Singapore standards and international standards.
• Positive working attitude and ability to work in a fast-paced environment
• Meticulous with an eye for detail
• 5.5 days,
• Salary will commensurate with experience