124 Technical Safety jobs in Singapore

Overview
Aibel is a leading service company within the oil, gas and offshore wind industries. We provide our customers with optimal and innovative solutions within engineering, construction, modifications and maintenance throughout a project’s entire life cycle. Aibel's 4000 skilled employees are located close to our customers at the company’s offices in Norway and South East Asia. In addition, we operate two modern yards in Haugesund and in Thailand, with complete prefabrication and construction capabilities.
Job responsibilities
Report to the Section Manager – System Engineering at basis level and to the Project Engineering Manager at project level.
Act as the single point of contact for the Safety Engineering Discipline and support the project team during Tenders or Conceptual, FEED or Detailed Engineering phases.
Be responsible for the provision of cost-effective Safety Engineering Design solutions and for all relevant technical matters related to Safety Engineering throughout the project lifecycle, in line with Statutory/Company and Client requirements
Implement Company work processes, procedures and quality policies as required by project.
Be conversant with Company contractual requirements, Scope Boundaries and support the project with the Management of change on assigned areas.
Be responsible for the management of resources and progress of the Safety Engineering scopes and for internal and external deliverables in line with the project budget and schedule.
Be responsible for the technical integrity of all Safety Engineering design activities and deliverables under his/ her supervision through the project lifecycle and for the compliance with relevant project performance, integrity, quality and HSE requirements.
Review and provide technical inputs to equipment/ package related technical matters, during the development of equipment specifications, bid enquiry package, technical bid evaluations and provision of other necessary Technical Safety inputs for the purchase of equipment / packages for assigned areas.
Manage the Technical Safety technical interfaces with equipment and package suppliers, for assigned areas to ensure that the equipment and packages comply with the technical requirements & specifications of and to monitor the compliance to Client’s Basis of Design, Standards & Project Specifications.
Supervise or act as the package responsible engineer for safety, life-saving and firefighting equipment.
Ensure that that all risks related to his/her area or responsibility are identified, assessed and preventive measures are implemented in a timely manner when required.
Provide support to the project on verification activities as required by the verification body / classification society or other applicable approving authorities.
Represent the Technical Safety discipline during meetings, audits, verifications, workshops and technical reviews and be responsible for an effective and timely resolution of identified issues.
Provide technical support related to Technical Safety at the fabrication site, whenever required.
Continuously seek to improve working methods, tools and procedures and contribute actively to the Technical Safety Discipline development and experience transfer.
Supporting the Discipline Head, responsible for the proper division of work and responsibility and for mentoring, training, and developing direct reports and provide inputs to their performance appraisal.
Perform any other duties as assigned by his/her supervisor.
Work experience requirements
Must have a minimum of 15 years of experience having worked in an multidisciplinary engineering setup for upstream oil & gas projects (Fixed and Floating installation projects) having served in the capacity of a Safety Engineer, having accrued thereof a minimum experience of 4 years in the capacity of a Lead Safety Engineer.
Must have prior work experience with medium/ large sized brownfield and/or greenfield projects in the upstream Oil and Gas sector and possess a good understanding of project phases, milestones, deliverables, internal and external interfaces.
Must have extensive experience with developing and implementing Safety Design Philosophies and Specifications related to Escape and Emergency Response, Active and Passive Fire Protection, Fire and Gas detection, Design Accidental Loads, Emergency Shutdown, Hazardous Area and Human Factor Engineering.
Must have had extensive experience with developing and checking Safety Engineering Deliverables such as but not limited to Escape Route and Safety Equipment Layouts, Firewater Calculations and P&IDs, Firewater Hydraulics, Fire and Gas Drawings, Hazardous Area, Noise Specification and Flare Radiation.
Must have had experience in specifying, managing and implementing recommendations from third party safety studies and workshops, including HAZID/ENVID, SIL Classifications, Smoke and Gas dispersion, Fire and Explosion Risk Analyses, Evacuation Analyses, QRA, ALARP assessments, Fire and Gas Mappings and Noise Studies etc.
Applicant must possess a thorough understanding and knowledge of oil and natural gas industry standards such as, but not limited to, API (American Petroleum Institute), ISO (International Organisation for Standardisation), NORSOK, NFPA, EU Directives and other relevant standards related to Technical Safety.
Applicant shall have advanced computer literacy in commonly used business software applications such MS Office and shall be conversant in the use of the latest versions of Technical Safety related software such as Pipenet, DNV PHAST, Flaresim or similar.
Qualifications
Bachelor’s degree in Mechanical/ Chemical/ Safety Engineering or other equivalent engineering specialisation.
Other skills
Must have excellent technical communication (verbal and written) skills with proven ability to present technical issues to design teams, client, technical authorities and verification bodies.
Must have strong interpersonal skills and ability to work well with people at all levels.
Must be a self-starter who can work independently, make sound decisions, analyse problems and provide focused solutions.
We regret that only shortlisted candidates will be notified.
Other information
Work location: Singapore
Application deadline: 30 October 2025
#J-18808-Ljbffr

Requirements

• Strong background in EPC project execution, with proven experience in technical safety engineering for offshore oil & gas facilities, particularly FPSOs in the Detailed Design Phase .

Key Responsibilities

• Lead the review of technical safety deliverables during the EPC phase (e.g., Safety Philosophies, Fire & Gas Detection Layouts, Escape Route Analysis, Hazardous Area Classification).
• Ensure compliance with international safety standards (API, IEC, ISO, DNV, ABS) and project-specific requirements.
• Interface with design disciplines, client representatives, and third-party certifying authorities to ensure safety requirements are fully integrated.
• Support and review HAZID, HAZOP, SIL, QRA, and FERA studies.
• Provide technical guidance on fire protection systems, gas detection, blast protection, and emergency systems.
• Review and validate safety system designs, including ESD, PSD, F&G, and evacuation systems.
• Participate in design reviews, model reviews, and safety audits.
• Support the development of ALARP demonstration documentation.

Required Qualifications & Experience

• Degree in Process, Safety, or Chemical Engineering (or equivalent).
• Minimum 10 years of experience in technical safety engineering, with a strong focus on FPSO projects.
• Proven track record in EPC project execution.
• In-depth knowledge of system safety design and offshore safety regulations.
• Proficiency with safety tools and software (e.g., PHAST, PIPENET, DNV Safeti).
  Strong communication and coordination skills.

Start Date: As soon as possible

Work schedule : 6 days a week

Brunel International S.E.A Pte. Ltd.

UEN No: R

EA License No: 16S8067

Requirements

• Strong background in EPC project execution, with proven experience in technical safety engineering for offshore oil & gas facilities, particularly FPSOs in the Detailed Design Phase.

Key Responsibilities

• Lead the review of technical safety deliverables during the EPC phase (e.g., Safety Philosophies, Fire & Gas Detection Layouts, Escape Route Analysis, Hazardous Area Classification).
• Ensure compliance with international safety standards (API, IEC, ISO, DNV, ABS) and project-specific requirements.
• Interface with design disciplines, client representatives, and third-party certifying authorities to ensure safety requirements are fully integrated.
• Support and review HAZID, HAZOP, SIL, QRA, and FERA studies.
• Provide technical guidance on fire protection systems, gas detection, blast protection, and emergency systems.
• Review and validate safety system designs, including ESD, PSD, F&G, and evacuation systems.
• Participate in design reviews, model reviews, and safety audits.
• Support the development of ALARP demonstration documentation.

Required Qualifications & Experience

• Degree in Process, Safety, or Chemical Engineering (or equivalent).
• Minimum 10 years of experience in technical safety engineering, with a strong focus on FPSO projects.
• Proven track record in EPC project execution.
• In-depth knowledge of system safety design and offshore safety regulations.
• Proficiency with safety tools and software (e.g., PHAST, PIPENET, DNV Safeti).
• Strong communication and coordination skills.

Start Date: As soon as possible

Work schedule : 6 days a week

Brunel International S.E.A Pte. Ltd.

UEN No: R

EA License No: 16S8067

The Safety Management Professional plays a vital role in enforcing and promoting workplace safety rules and regulations.

• Conduct daily health, safety, and environmental inspections to identify potential hazards and recommend corrective actions.
• Collaborate with the main contractor to ensure timely closure of issues and coordinate site safety management activities.
• Verify that the main contractor has implemented necessary safety measures and monitor their effectiveness.
• Assist the Project Safety Manager in all safety, health, environmental, and welfare matters.

• Perform site visits to monitor Contractors' safety performance and provide feedback on improvement opportunities.
• Review method statements and verify they are properly implemented on-site.
• Participate actively in risk assessments and develop mitigation strategies.
• Provide standing supervision for critical construction works and promptly notify the Superintending Officer and CAG Duty Manager of any incidents.

Safety management specialists play a crucial role in maintaining a secure and healthy work environment. They oversee the development, implementation, and maintenance of safety policies and procedures that ensure compliance with relevant regulations and standards.

• Develop, implement, and maintain comprehensive safety policies and procedures to mitigate risks and ensure employee well-being.
• Conduct regular site inspections to identify potential hazards and develop corrective action plans to address them.
• Collaborate with colleagues to administer and improve existing safety management systems, ensuring alignment with industry best practices and regulatory requirements.
• Provide training programs for employees on workplace safety, health, and environmental practices to enhance awareness and compliance.

To excel as a safety management specialist, you will require:

• A minimum of 5 years of experience in a related field, preferably in construction or a similar industry.
• Valid certifications in occupational health and safety (OHS) and relevant safety management qualifications.
• Strong analytical and problem-solving skills to identify and mitigate risks.
• Excellent communication and interpersonal skills to collaborate with cross-functional teams and stakeholders.

As a valued member of our team, you will have access to professional growth opportunities, collaborative working environments, and opportunities for continuous learning and skill development.

Job description:

As part of the Changi East Safety function, you will join the team responsible for ensuring that construction works and related activities are conducted safely in compliance with aerodrome safety, workplace safety & health (WSH) and site operations compliance and requirements. The team ensures safety by leveraging various means, ranging from culture promulgation to the development and deployment of digital interventions.

Job Description:

• Assist in managing effective safety management systems for T5 development works.
• Manage projects and explore the adoption of technology related to safety and operations, including but not limited to identify potential gaps to safety & operational requirements contributing to the timely completion of T5 works.
• Drive collaboration to maintain safety and operations procedures, facilitate consensus building amongst stakeholders whenever there are differing requirements, organise safety trainings, and conduct safety evaluations for construction tenders.
• Serve as the secretariat for meetings with stakeholders to achieve key milestones. This includes but not limited to setting meeting agendas, performance reporting, compiling safety data for trend analysis, and review risk assessments.

Job Requirements:

• Degree in any discipline with at least 1-3 years of relevant working experience with large corporations or government agencies (preferably in Safety Management, or a related field).
• Possess drive, initiative, meticulous and able to multi-task effectively in a dynamic and fast-paced work environment.
• Strong communication skills and the ability to work collaboratively with internal and external stakeholders at all levels.
• This is a contract position

We are seeking a skilled professional to join our team as a Safety Management System Administrator.

• Implement and maintain permit-to-work systems, ensuring compliance with relevant regulations and safety protocols.
• Serve as secretary of the Project WSH Committee, coordinating meetings and disseminating information to staff and subcontractors on site activities and actions.
• Maintain strict adherence to WSH Acts, Regulations, and in-house rules, guaranteeing a safe working environment for all personnel.
• Conduct regular safety inspections to verify levels of compliance, identifying areas for improvement and recommending corrective measures.
• Liaise with government agencies regarding safety concerns and take necessary actions to mitigate risks.
• Develop and implement comprehensive safety training programs to enhance employee knowledge and promote a culture of safety.

About the Role: The successful candidate will possess excellent organizational and communication skills, with the ability to work effectively within a dynamic team environment. Strong analytical and problem-solving abilities, coupled with a keen eye for detail, are essential for this position.

Key Responsibilities:

• Coordinating and implementing safety management initiatives
• Collaborating with stakeholders to achieve safety goals
• Providing guidance and support to employees on safety procedures
• Monitoring and reporting on safety performance metrics

Benefits: As a valued member of our team, you can expect a competitive compensation package, opportunities for professional growth and development, and a dynamic work environment that prioritizes safety and well-being.

What We Offer: A chance to make a tangible impact on workplace safety, collaborate with like-minded professionals, and grow your career in a supportive and inclusive organization.

SMRT Corporation Ltd (SMRT) is a public transport services provider. Our primary business is to manage and operate train services on the North-South Line, the East-West Line, the Circle Line, the new Thomson East-Coast Line and the Bukit Panjang Light Rail Transit. This is complemented by our bus, taxi and private hire vehicle services.

An exciting and rewarding career is waiting for you at SMRT. Join us and embark on a journey that matters. You Matter – we take care of you and your well-being. Your Work Matters – your ideas and contributions work towards building the future of our transport system and create positive impacts to the community. Your Development Matters – we offer diverse careers and learning opportunities for our people to grow you to the fullest of your potential.

Come onboard the SMRT journey today.

Vision

Moving People. Enhancing Lifestyles

Core Values

Respect, Integrity, Safety & Service, Excellence

As a Technology Development (TD) Process Hazard Analysis (PHA) Engineer at Micron Technology, Inc., you will be responsible for reviewing, identifying, characterizing, and mitigating process hazards and risks associated with semiconductor manufacturing through systematic review of chemicals, processes, equipment and technologies. You will be part of the TD Operations team at Micron and will play an integral role in the development, implementation and sustainment of a risk-based Process Safety program and to achieve a world class process safety environment while enabling technology and innovation and by cultivating a culture of "safety first". This role will be a crucial interface between TD and HVM.

• Support implementation of Micron's risk-based process safety management system
• Work with site Facility, Fab Engineers, and EHS team members to define and implement process safety solutions and strategies for controlling process hazards associated with chemistries, tools, and facilities systems
• Identify and characterize process hazards in processes, equipment, and technologies using Preliminary Screening Process (PrSP) for facility systems and Relative Risk Analysis (RRA) for Fab tools.
• Review, and conduct hazard and operability studies on tools and systems
• Identify and drive the resolution of potential process safety issues on first-of-a-kind tools, chemicals, and materials. Prepare transfer documentation and training for manufacturing
• Effectively partner with EHS teams, facilities, operations, engineering groups, global process safety teams, and suppliers on mitigating or controlling identified hazards and risks. Drive key suppliers to enable safe and compliant equipment installations and chemical usage
• Evaluate process chemistries, including reactivity, byproduct formation, and other material characteristics (i.e. flammability, corrosives, etc.)
• Collaborate with manufacturing sites to review first-of-a-kind tool installations as well as chemical applications that fall outside of process transfer from PHA.
• Transfer of PHA documents to the receiving sites. This covers HAZOPs, RRA, SRD, and other correlated information, allowing the sites where it is received to comprehend and assess for alignment with local codes, setup, and requirements.
• Engage with TD engineers and receiving sites to support the efficient handover of PHA activities
• Participate and lead incident investigations when Process Safety is involved

Requirements:

• BS, or MS in Chemical Engineering, Mechanical Engineering, Environmental Engineering, Chemistry, Materials Sciences or a related field
• At least 5 years of relevant working experience
• Semiconductor industry experience is a must
• Proficient in communication, able to comprehend and relay highly technical or complex information to a diverse audience in English
• Excellent analytical and problem-solving skills with great attention to detail
• Proficient with Microsoft Office including PowerPoint, Excel, Word, etc.
• A high level of self-motivation with the ability to work with minimal direction
• Familiarity with semiconductor processes and equipment