46 Satellite Engineer jobs in Singapore

Maintenance Engineer (Satellite, RF, Network)

Responsibilities

• Involved in maintaining and supporting Satellite, Radio Frequency and Network Communication Systems.
• Responsible for troubleshooting Satellite, RF and Network System.
• Managed integrated systems consisting of electrical, mechanical and electronic subsystems.
• Involved in troubleshooting of Satellite Communication System, Frequency and baseband equipment using common engineering tools and support test equipment.
• Responsible for Technical writing, testing and use of support test equipment.
• Good in writing documentation, manual and instructions.
• Knowledge of Radio Frequency Engineering drawings or Electrical circuits.

Requirements

• Strong knowledge of Satellite, Radio Frequency and Network Communication Maintenance work.
• Good in handling Satellite Communication system and Network Alcatel/Cisco Switches and Routers.
• Good in Maintenance and Support work.
• Involved in Network Communication System support and Satellite, RF Maintenance.
• Diploma in Engineering in Electrical/Electronics and Communication / Information Technology or equivalent.
• Minimum 5 years of Satellite, Network and RF Maintenance and Support experience.
• Standby/recall duties are required on the rotational basis

We respect your privacy and all communication will be treated with confidentiality.

Please contact us or apply in-confidence to us with you updated MS Word Resume to :

Yong Jeline (Reg. No. R )

STAR CAREER CONSULTING PTE LTD (EA License: 20C0353)

Maintenance Engineer (Satellite, RF, Network)

Responsibilities

• Involved in maintaining and supporting Satellite, Radio Frequency and Network Communication Systems.
• Responsible for troubleshooting Satellite, RF and Network System.
• Managed integrated systems consisting of electrical, mechanical and electronic subsystems.
• Involved in troubleshooting of Satellite Communication System, Frequency and baseband equipment using common engineering tools and support test equipment.
• Responsible for Technical writing, testing and use of support test equipment.
• Good in writing documentation, manual and instructions.
• Knowledge of Radio Frequency Engineering drawings or Electrical circuits.

Requirements

• Strong knowledge of Satellite, Radio Frequency and Network Communication Maintenance work.
• Good in handling Satellite Communication system and Network Alcatel/Cisco Switches and Routers.
• Good in Maintenance and Support work.
• Involved in Network Communication System support and Satellite, RF Maintenance.
• Diploma in Engineering in Electrical/Electronics and Communication / Information Technology or equivalent.
• Minimum 5 years of Satellite, Network and RF Maintenance and Support experience.
• Standby/recall duties are required on the rotational basis

We respect your privacy and all communication will be treated with confidentiality.

Please contact us or apply in-confidence to us with you updated MS Word Resume to :

Yong Jeline (Reg. No. R )

STAR CAREER CONSULTING PTE LTD (EA License: 20C0353)

Consultant Engineer (Satellite, RF, Network)

Responsibilities

• Involved in maintaining and supporting Satellite, Radio Frequency and Network Communication Systems.
• Responsible for troubleshooting Satellite, RF and Network System.
• Managed integrated systems consisting of electrical, mechanical and electronic subsystems.
• Involved in troubleshooting of Satellite Communication System, Frequency and baseband equipment using common engineering tools and support test equipment.
• Responsible for Technical writing, testing and use of support test equipment.
• Good in writing documentation, manual and instructions.
• Knowledge of Radio Frequency Engineering drawings or Electrical circuits.

Requirements

• Strong knowledge of Satellite, Radio Frequency and Network Communication Maintenance work.
• Good in handling Satellite Communication system and Network Alcatel/Cisco Switches and Routers.
• Good in Maintenance and Support work.
• Involved in Network Communication System support and Satellite, RF Maintenance.
• Diploma in Engineering in Electrical/Electronics and Communication / Information Technology or equivalent.
• Minimum 3 years of Satellite, Network and RF Maintenance and Support experience.

We respect your privacy and all communication will be treated with confidentiality.

Please contact us or apply in-confidence to us with you updated MS Word Resume to :

Yong Jeline (Reg. No. R )

STAR CAREER CONSULTING PTE LTD (EA License: 20C0353)

Consultant Engineer (Satellite, RF, Network)

Responsibilities

• Involved in maintaining and supporting Satellite, Radio Frequency and Network Communication Systems.
• Responsible for troubleshooting Satellite, RF and Network System.
• Managed integrated systems consisting of electrical, mechanical and electronic subsystems.
• Involved in troubleshooting of Satellite Communication System, Frequency and baseband equipment using common engineering tools and support test equipment.
• Responsible for Technical writing, testing and use of support test equipment.
• Good in writing documentation, manual and instructions.
• Knowledge of Radio Frequency Engineering drawings or Electrical circuits.

Requirements

• Strong knowledge of Satellite, Radio Frequency and Network Communication Maintenance work.
• Good in handling Satellite Communication system and Network Alcatel/Cisco Switches and Routers.
• Good in Maintenance and Support work.
• Involved in Network Communication System support and Satellite, RF Maintenance.
• Diploma in Engineering in Electrical/Electronics and Communication / Information Technology or equivalent.
• Minimum 3 years of Satellite, Network and RF Maintenance and Support experience.

We respect your privacy and all communication will be treated with confidentiality.

Please contact us or apply in-confidence to us with you updated MS Word Resume to :

Yong Jeline (Reg. No. R )

STAR CAREER CONSULTING PTE LTD (EA License: 20C0353)

Development:

• Lead the development and implementation of Group and partners OEMs’ new repair capabilities. gather market data, investment requirements, perform feasibility studies. Develop new test benches, Coordinate trainings
• Analyze technical data, gather market data, investment requirements to perform feasibility studies and Return on Investment.
• Develop, source new equipment, consumables and chemicals and support investments linked to testing & repair policies.
• Drive the progress of the tasks, pilot projects’ milestones review, report advancement, track investments and expenses, monitor contractors and suppliers, devise maintenance plans.
• Perform self-assessments, engineering studies, build up justification file and liaise with QA for smooth airworthiness application and repair capability integration.
• Liaise with the OEMs to clarify any confusion
• Establish calibration requirements
• Review Testability and perform Shop validation
• Follow-up the testing & repair ramp-up with the workshops and support the Entry Into Service for new programs.
• Develop and draft user documentations and training materials. Conduct briefing or training sessions.
• Ensure SEDSA contract terms & conditions are understood & satisfied. Pro-actively manage contractual issues with 3rd Parties and suppliers.
• Manage SAFRAN OEMs Support investment and be actively involved in repair policies
• Develop excellent relationships across multiple organizations & with all levels of workshops and other Company personnel.
• Safeguard interest of SAFRAN ELECTRONICS & DEFENCE SERVICES ASIA (SEDSA) and partners OEMs
• Support the Entry Into Service for new programs
• Develop the Integrated Logistic Support at SEDSA levels

Support & maintain new capabilities

• Coordinate with Product Support Engineer (PSE), and Operations personal to ensure optimal customer support
• Assist Maintenance personals when required.
• Implement systems or components modifications following notification of change for Service Bulletins (SB), Service Information Letters (SIL) or CMM. Support workshop implementation of new requirements upon fleet upgrade and retrofit campaigns.
• Assist on Request For Information or Request For Quotation for technical/commercial proposals
• Help sourcing for material, suppliers, 3rd parties, alternatives
• Take a pro-active approach, initiate creative solutions to maintenance issues and assist the workshops in implementing best practices, Continuous Improvement, LEAN operations, cost reductions and applying lessons-learned from previous or bench-marked experiences
• Ensure that communication between all stakeholders – HQ, OEMs, Workshops, Operation, QA, Sales, CI, Supply Chain, Customers, and Suppliers - is optimum.
• Report to management. Flow down relevant and timely information.

Health, Safety & Environment

• Comply with all health, safety and environment (HSE) regulations as prescribed by law and company’s policies.
• Actively participate and contribute to HSE initiatives & Corporate HSE programs and in HSE risk communications & mitigations.

Perform any other duties as assigned

Experience and Qualifications:

• Degree in Mechanical/Electrical/Aeronautical Engineering
• At least 3 years of Aviation Engineering experience, Technical Support Aircraft Maintenance and Repair Operations, in OEM or MRO environment
• Proficient in product support and trouble shooting procedures
• Hands-on experience on design and wiring of electronics test fixtures
• Experience in OEM technical support, or related MRO operations/engineering
• Must be familiar with technical support environment, processes, and manuals used for aircraft maintenance. Working knowledge of the Aviation Airworthiness requirements like Part 145 is advantageous
• Effective Project Management and interpersonal skills
• Experience in calibration requirements and procedures
• Proficient with Microsoft software applications
• Working knowledge of the Aviation Airworthiness requirements like Part 145 is advantageous
• Sound knowledge of quality systems such as ISO9000 and AS9110
• Excellent attitude, good team player, motivated, driven, committed, reliable. Take ownership of the projects
• Rigorous and organized. Ability to multi task in a dynamic environment
• Excellent communications skills. Well versed in written and spoken English
• Able to think ahead, process data, make decisions and solve problems.

• Bedok - East, Singapore
• Monday to Friday (8am - 5.15pm)
• 1 Year Contract (Renewable / Convertible)
• Reputable MNC with strong safety culture - Aerospace Industry

Responsibilities

• Investigate workplace accidents and liaise with internal specialists and external authorities to identify root causes and prevent recurrence.
• Monitor compliance with permits, licenses, and statutory regulations.
• Conduct regular EHS communications across departments and stakeholders.
• Utilize problem-solving tools (CORE/CPS) to address complex EHS challenges.
• Support site audits: ISO14001, ISO45001, ISO50001, Safety Management Systems, etc.
• Perform machine/equipment audits and support workplace inspections and WSH meetings.
• Track and analyze EHS performance metrics to identify hazards and recommend improvements.
• Assist in emergency response training and fire drill exercises.
• Deliver EHS awareness programs for all staff levels to ensure regulatory compliance.
• Participate in process safety assessments and review risk documentation (RA, JSA, JHA, HAZOP).
• Keep the site's legal register and EHS layouts up to date in accordance with changes or technological advancements.

Requirements

• Diploma in Engineering, Chemistry, or Environmental Engineering (or equivalent).
• Registered Workplace Safety and Health Officer (WSHO) certification is preferred.
• Prior experience in the Aerospace or Manufacturing industry is a plus.

Applicants who possess relevant experience for the above responsibilities are most welcome to apply. If you do not possess the above experience, your application will still be considered on individual merits and you may be contacted for other opportunities.

By submitting your personal data and/or resume, you give consent to collection, use and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

**We regret to inform that only shortlisted candidates would be notified

Interested applicants may send their resume to or click APPLY NOW

Talentvis Singapore Pte Ltd | EA License No: 04C3537

EA Personnel Name: Mok Mun Teng (Katrina) | EA Personnel No: R

Location:
Seletar, Singapore
As a Manufacturing Services Engineer for Fan Blade Singapore Facility, you will provide support to the Manufacturing Services Leader to ensure that the organization’s goals are delivered. You will be responsible for coordinating, at plant and cell level, for the Manufacturing Services organization’s service lines. Your task is to ensure that all aspects of external Service Provider partnerships are delivered and monitored in line with business requirements.
Key Accountabilities
Work closely with the designated in-charge to deliver the Manufacturing Services objectives.
Coordinate designated aspects of external Service Provider partnerships delivered by Manufacturing Services, in line with business requirements and company standards.
Provide data analysis and identifying opportunities to improve cell and machine performance
Support implementation of the company Health & Safety Standards which may include taking the role of Responsible Person (RP) or Assistant RP for specified activities.
Develop framework contracts and Service Level Agreements for external Service Providers
Coach and lead maintenance activities for a team of technicians and plan/execute all aspects of manufacturing services activities.
Engaging in quality control activities to guarantee that manufacturing services practices adhere to both internal benchmarks and external regulations or certifications.
Expected to hold key secondary appointments in the Manufacturing Services lines such as:
Take the lead for Fixture Care, developing the service to the business and ensuring that the Fixture Care service providers are monitored against agreed performance levels.
Direct all aspects of the partnership with the Material Revert Service Provider at cell and plant level, measuring and monitoring performance against implemented Service Level Agreements.
Develop and implement Energy Management plans, strategies and initiatives for Manufacturing Services at cell and plant level.
Manage the Calibration requirements of the business and oversee the Calibration Service Provider monitoring performance against implemented Service Level Agreements.
Administer the business requirements for Engineering Inspections.
Interface with the Fluid Management Service Provider at cell and plant level ensuring that the required service levels are achieved.
In conjunction with the business Risk Manager and Manufacturing Services Leader (MSL), manage the Property Risk improvement plans.
Liaise with other MSEs within the company, in order to deliver objectives and goals across the whole of Manufacturing Services.
Effective utilization of predictive and other non-destructive testing methodologies designed to proactively identify and isolate inherent reliability problems to prevent unplanned equipment breakdowns.
Effective application of data analysis techniques such as Statistical Process Control (SPC), Reliability modelling and prediction, root cause analysis (RCA), failure reporting, analysis and corrective action system (FRACAS).
System administrator for Maximo, Gage In site & Statutory Inspection Database with all manufacturing equipment records and maintenance activities.
Behavioural and Technical Competencies
Asset Management and Reliability Maintenance
HS&E and Risk Management
Supplier Relationship Management
Cross Boundary Collaboration
Accountability and Leadership
Project Management Communicating and Influencing
Quality improvement and Quality assurance
Able to work collaboratively with stakeholders at various levels and Exceptional communication skills.
High understanding of electrical, electronic systems, computer numerical control systems and a knowledge of mechanical, hydraulic systems
Education and Experience
Bachelor’s Degree in Electrical/Mechanical/Mechatronics/Aerospace Engineering.
Working experience with proven track records in asset management and reliability maintenance.
Personnel handling and management skills with experiences in managing continuous improvement projects.
Systematic problem-solving skills relating to handling of equipment troubleshooting and operational support issues and customer/ vendor relationships. Excellent interpersonal, communication and facilitation skills are a must.
Must be conversant with industry regulations, best practices and maintenance management fundamentals such as Total Productive Maintenance (TPM) and Reliability Centered Maintenance (RCM). Knowledge of Maximo system.
Qualifications in project management lean six sigma or any other relevant certifications will be advantageous.
#J-18808-Ljbffr

Overview
Location:
East Singapore
Industry:
Aerospace (MNC)
Great for Career Development & Resume Boost
Join a
renowned MNC in the Aerospace sector
known for its strong workplace culture and professional development opportunities. We are looking for a passionate
WSHO Officer
who is eager to make a difference and grow in a structured and supportive environment.
Responsibilities
Investigate workplace accidents and liaise with internal specialists and external authorities to identify root causes and prevent recurrence.
Monitor compliance with permits, licenses, and statutory regulations.
Conduct regular EHS communications across departments and stakeholders.
Utilize problem-solving tools (CORE/CPS) to address complex EHS challenges.
Support site audits: ISO14001, ISO45001, ISO50001, Safety Management Systems, etc.
Perform machine/equipment audits and support workplace inspections and WSH meetings.
Track and analyze EHS performance metrics to identify hazards and recommend improvements.
Assist in emergency response training and fire drill exercises.
Deliver EHS awareness programs for all staff levels to ensure regulatory compliance.
Participate in process safety assessments and review risk documentation (RA, JSA, JHA, HAZOP).
Keep the site’s legal register and EHS layouts up to date in accordance with changes or technological advancements.
Qualifications
Diploma in Engineering, Chemistry, or Environmental Engineering (or equivalent).
Registered Workplace Safety and Health Officer (RWSHO)
certification is
preferred .
Prior experience in the Aerospace or Manufacturing industry is a plus.
Why Join Us
Reputable
MNC with strong safety culture
Opportunity for
contract renewal or conversion
to permanent
Valuable exposure to
international standards
(ISO certifications)
Located in the
East
– convenient and accessible
Excellent opportunity to
boost your resume
and expand your EHS expertise
Ready to take your EHS career to the next level? Apply now and be part of a high-performing Aerospace team!
Applicants who possess relevant experience for the above responsibilities are most welcome to apply. If you do not possess the above experience, your application will still be considered on individual merits and you may be contacted for other opportunities.
By submitting your personal data and/or resume, you give consent to collection, use and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.
We regret to inform that only shortlisted candidates would be notified
Interested applicants may send their resume to

or click APPLY NOW
Talentvis Singapore Pte Ltd | EA License No: 04C3537
EA Personnel Name: Ong Hui Shan (Gwen) | EA Personnel No: R
#J-18808-Ljbffr

Responsibilities
In charge of performing quality assurance functions with regard to the product, process and maintain quality management system while ensuring compliance with all customers’ requirements
Responsible for reviewing and revising quality procedures and quality control instructions
Liaise with customers / vendors / suppliers on non-conformance activities, perform root cause analysis and determine effective corrective actions to reduce or eliminate the cost of poor quality
In charge of performing internal audits to evaluate quality system, products, and processes
In charge of performing vendors’ and on-site audits as required
Drive down monthly Cost of Poor Quality/ scrap
Qualifications
Degree in Mechanical / Aeronautical Engineering / other relevant disciplines
Minimum 2 years of experience in Quality Management System and NADCAP
How to apply
To submit your application, please apply online or call + for private and confidential discussion.
Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.
RN Care Pte. Ltd.
EA License No: 17C8900
#J-18808-Ljbffr