450 Quality Assurance Director jobs in Singapore

Responsibilities
Establishes Quality and Reliability standards by studying Product and Consumer requirements with other members of Management as well as with Operations’ personnel.
Establishes input material standards through engagement with manufacturing and engineering personnel; conferring, coaching and negotiating with suppliers; devising testing methods and procedures to ensure conformance.
Establishes In-process Product and Process monitoring standards by understanding Product, Process & Customer needs; devising testing methods and procedures; enforcing compliance.
Establishes standards for the disposition of finished product by devising evaluation tests, methods and procedures.
Establishes rework standards, where applicable by devising inspection and physical testing methods and procedures.
Establishes Product Quality documentation system by drafting and updating Quality Assurance procedures.
Maintains Product Quality by enforcing Quality Assurance policies and procedures as well as applicable regulatory requirements.
Collaborate with members of Management to develop and deploy New Product Introduction, Engineering Design, Manufacturing and Training methods targeting Excursion-free Ramp.
Collates Product and Process Quality Reports for analyzing and summarizing the information and tracking trends to trigger timely Corrective/Preventive/improvement initiatives thereby preventing Excursions.
Completes Quality Assurance Operational requirements by scheduling and assigning employees; following up on work results.
Maintains Quality Assurance Organization structure by Recruiting, Selecting, Orienting and Training employees.
Motivates and Retains Quality Assurance Staff by Coaching, Counseling, and Disciplining employees, where needed; Planning, Monitoring and Appraising outcome from the business Objectives’ perspective as strategized by the Executive Management of the company.
Maintains Professional and Technical Knowledge by attending educational workshops; reviewing professional publications; establishing personal networks; participating in professional societies.
Achesieve financial objectives by preparing the Quality Assurance budget; scheduling expenditures; analyzing variances; initiating corrective actions to address gaps, if any, in a timely manner.
Works together with the Team with Passion to achieve targeted Objectives.
Ensures Integrity and be the Voice of the Plant and Voice of the Customers protecting interests of both parties
Required Experience and Qualifications
(Required knowledge, skills and experience---however acquired):
Degree in Electrical/Electronics/Mechanical/Chemical Engineering or Material Physics
More than 10 years experience in Packaging, Test, Wafer Sort, Wafer Bumping and associated Backend Operations out of which at least 5 years in managerial position.
Preferably experienced in a multi-cultural environment with exposure to Global customer-base.
Knowledge of Quality tools such as 8D systematic problem solving methodology, FMEA, statistical tools such as JMP is desirable.
Good understanding of ISO9000, TS16949, ISO14001 and OHSAS18001 besides Regulatory requirements such as ROHS, REACH, Conflict Free sourcing initiatives etc.
#J-18808-Ljbffr

Associate Director, DevOps & Quality Assurance
Get AI-powered advice on this job and more exclusive features.
At AIA we’ve started an exciting movement to create a healthier, more sustainable future for everyone. As pioneering innovators for over 100 years, we’re transforming our organisation to be faster, simpler and more connected to develop digital solutions and experiences that help more people live Healthier, Longer, Better Lives. To get there, we need people with tech/digital/analytics expertise and passion to help develop positive, sustainable change through digitally enhanced experiences that will impact the lives of millions of people.
If you believe in developing a better tomorrow, read on.
About The Role
The incumbent will be a key driver of our engineering-driven culture and be responsible for designing and implementing strategic initiatives that leverage AI and Machine Learning to create self-healing, automated, and cloud-native operational systems. This is a hands-on leadership role for a technically proficient individual with the vision and negotiation skills to champion change, eliminate manual processes, and foster a culture of collaboration across our engineering, DevOps, and Site Reliability Engineering (SRE) teams.
What You Will Do
Strategy & Leadership: Design and implement a multi-year strategy to automate and optimize IT operations using AI/ML-driven solutions, predictive analytics, and self-healing systems. Drive the cultural change towards a proactive, autonomous operations model and continuous delivery mindset. Evangelize and implement modern SRE practices across engineering teams.
DevOps Implementation: Lead the organizational cultural transformation towards engineering-driven practices and DevOps excellence
AIOps Implementation: Lead the development and deployment of AIOps platforms to proactively identify and resolve issues, reduce alert fatigue, and improve infrastructure and application observability and performance.
Process Transformation: Spearhead initiatives to eliminate traditional operations bottlenecks, automate manual processes, and establish new standards for operational efficiency and system reliability.
Team Collaboration: Foster a collaborative and integrated environment across product engineering, DevOps, and Site Reliability Engineering (SRE) teams to ensure shared ownership and accountability for the full application lifecycle.
Platform Modernization: Guide the evolution of our CI/CD pipelines, container orchestration on Kubernetes, and cloud-native infrastructure to support autonomous and proactive operations.
Cultural Change: Act as a change agent within the organization, articulating the vision for an engineering-driven culture and using excellent communication and negotiation skills to build consensus and drive adoption of new methodologies.
Hands-on Contribution: Remain deeply hands-on with the technology stack, actively contributing to architectural design, code reviews, and key technical decisions to ensure a seamless bridge between innovation and execution.
What You Should Have
Degree from a recognized University in Information Technology, Computer Science, Computer Engineering.
Certifications in AIOps, DevOps, AWS/Azure/GCP, ITIL, or related fields are a plus. GenAI certifications (e.g., NVIDIA, Google, Databricks) are highly desirable.
A minimum of 10-15 years of deep DevOps & SRE Experience: Extensive, hands-on experience in DevOps and SRE principles, including CI/CD pipeline automation, infrastructure-as-code, and observability.
AI/ML for Operations: Proven experience in designing or implementing AI/ML-driven solutions for IT operations, covering both infrastructure and application observability, such as log analysis, anomaly detection, and predictive maintenance.
Modern Technology Stack: Strong practical experience with technologies:
Languages: Java, NodeJs, Python
Front-end: ReactJs
Containerization & Orchestration: Docker and Kubernetes
CI/CD: GitHub Actions, Bamboo, or similar tools
Infrastructure as Code & Observability Tools: Terraform, CloudFormation, ELK, Dynatrace, Prometheus, Grafana, Datadog etc.
Proficiency in scripting (Python, PowerShell)
Cloud-Native Architecture: Expertise in designing and managing cloud-native systems, microservices architectures, and distributed systems.
Experience with microservices architecture and API management.
Knowledge of security best practices and DevSecOps implementations.
Ensure automated systems are complied with security, governance, and regulatory standards.
Proven track record of successfully implementing AIOps/NoOps strategies in large-scale enterprises, preferably in highly regulated industries such as financial insurance.
Requires in-depth experience, knowledge and skills in own discipline.
Uses best practices and knowledge of internal/external business issues to improve products or services.
Ability to work in high-pressure environment, troubleshoot complex issues across on-prem and cloud quickly, and successfully handle multiple priorities.
Have systematic problem-solving approach, effective communications skills and have sense of ownership and drive.
Works independently with minimal guidance.
Manage resource and ability to perform capacity planning.
Applies best practices and knowledge of internal/external business issues to improve products or services in own discipline.
Solves moderately complex problems; takes a new perspective on existing solutions.
Interprets customer needs, assesses requirements and identifies solutions to non-standard requests.
Explains information and persuades others in straightforward situations.
Makes decisions for own work priorities and allocation of time to meet deadlines.
Is accountable for technical contribution to project team or sub-team.
Builds awareness of costs related to own work.
Build a career with us as we help our customers and the community live Healthier, Longer, Better Lives.
You must provide all requested information, including Personal Data, to be considered for this career opportunity. Failure to provide such information may influence the processing and outcome of your application. You are responsible for ensuring that the information you submit is accurate and up-to-date.
ABOUT AIA
For over a century, AIA has served the ever-changing needs of our customers across Asia-Pacific. Our Purpose to help millions of people live Healthier, Longer, Better Lives is at the heart of everything we do. As pioneering innovators, we’re now transforming AIA to be faster, simpler and more connected to create better solutions and impactful experiences for our customers and communities. AIA encourages and enables our people to act with clarity, courage and humanity in service of our Purpose.
JOIN US
At AIA, we believe in empowering every one of our people to find their "better" – in the work they do, the career they build, the life they live and the difference they make. Whether it’s investing better wellbeing, inspiring better learning, building better relationships, or making a better impact on customers, a career at AIA will challenge you to find new ways to pursue your ‘better’.
AIA is committed to building a vibrant, diverse, and inclusive workforce for all employees to thrive in. Join us if you believe in creating a better tomorrow!
Seniorities, Employment Type & Industry
Seniority level: Director
Employment type: Full-time
Job function: Management and Manufacturing
Industries: Insurance
Referrals increase your chances of interviewing at AIA Singapore by 2x.
Get notified about new Director of DevOps jobs in Singapore, Singapore.
#J-18808-Ljbffr

Job Description & Requirements
Review the inspection history to summarize the integrity status of the plant equipment and piping systems.
Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.
Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan
Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).
Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.
Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.
Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.
Provide recommendations and timely updates on equipment degradation problems.
Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.
Preparation of final inspection reports with all findings, abnormalities and recommendations.
Ensure quality of inspected items to meet project requirements and standards.
Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.
Read, understand project related ITP, procedures, specification requirements.
Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.
Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication.
Knowledge in welding inspection
Eligibility Criteria
Graduate Engineers with 3-6 years of relevant experience.
Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.
Experience in Refinery and Oil & Gas must.
Experience in QA/QC and Knowledge in Non-Destructive Testing methods.
Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.
Work Independently and can work in Singapore and other countries.
Fluent Reading, Speaking and Writing in English.
Willing to commit 24 months contract/ project completion.
Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.
Energetic & Result Orientated
#J-18808-Ljbffr

Requirements:
Recognized Degree in related field
Experience in working with Contractors
Relevant experience in Civil/ Building, preferably with experience in facade installation works
Good team player and adaptable to dynamic environment
Responsibilities:
Responsible for effective implementation of overall project quality management system (QMS).
Preparation of relevant reports for recommendation and continuously improvements for the project.
Responsible for managing team of QA/QC engineers.
Preparation and compilation of Inspection and Test Plan (ITP), Project Quality Plan (PQP) and Operation Maintenance and Manual (OMM).
Ensure the requirements of Project Quality Plan/Manual is implemented and adhered to the assigned project.
Liaise with Clients' and Sub-Contractors' Quality representatives.
Participate in audits by Clients' team of the Company's systems implemented on assigned Projects.
Investigate and document and resolve any Clients' complaints about Quality.
Make recommendations to Project team regarding improvements on Quality.
Assist Project and QA/QC Team in inspection and testing as necessary.
Liaise with Independent Inspection and Testing Agency in respect of factory and Site inspections in line with Project Specification requirements.
Maintaining, improving and implementing Project Quality system and Quality plans in conjunction with the project team.
Investigation of Quality deficiencies and implementation of corrective action as well as recommendation for preventive actions.
Identify and document Quality problems, seek solutions and verify the implementation of solutions.
Any other duties as directed by Managing Director
Checking that all non-conforming materials, components and equipment are promptly identified and segregated pending their final disposition.
Liaise with RE/RTO and all other parties in respect of inspection and handing over of installed steel and facade elements.
Perform inspection and check for all quality related procedures.
Coordinate with the managers and supervisors of the projects.
Responsible for closure of Non-conformance reports and Site Instruction.
#J-18808-Ljbffr

Job Description & Requirements

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

· Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated

Job Description & Requirements

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

· Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated

Job Description & Requirements

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

· Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated

Job Description & Requirements

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

· Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

Job Description & Requirements

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

· Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated