724 Quality Assurance Certifications jobs in Singapore

Quality Assurance Quality Control Engineer
Strategic Resourcer at Airswift Malaysia
Position title: Senior QA/QC Engineer
Tenure: 1 year contract
Salary Offered: Open for discussion
Job Description:
Prepare and conduct Project Specific Quality requirements training to production Supervisors and Sub-contractors QC Personnel
Establish Work Procedures and Instructions
Support QA/QC Manager in establishing WPS, PQR and WQT Qualifications.
Act as Project Lead QA/QC and control the entire project Quality Assurance and Control activities during construction phase.
Oversee the Inspector’s performance on the project towards monitoring and control of workmanship towards quality.
Update inspection status and records on a daily basis
Attend weekly client progress review, Internal and Sub-Contractors meeting to discuss quality issues
Liaise with client with regard to quality matters on project specifics
Schedule and conduct Project Specific Quality Audit as planned
Monitor the compilation of Piping Test Packages
Monitor administration and submission of ITRs for Project
Prepare and maintain Weekly Weld Rejection Rate Summary
Monitor the issue and close-out of NCR’s for the project and maintain its register
Monitor progressive compilation of the MDR for the project as work progress
Job Requirements:
Singapore national or Singapore PR only
Degree in Mechanical Engineering
Minimum 5 years of working experience in welding inspections of structural, piping fabrication, welding jobs including Non-Destructive testing.
Possess a valid Welding Inspectors Certificate (AWS or CSWIP)
Experience in handling project audit and liaise with internal & external auditor
Knowledge in structural fabrication, piping isometric drawing and materials
Experience in piping line walk, reinstatement inspections by clear understanding of isometric drawings
Excellent written and good communication skills, able to interact with people of all levels and teamwork
Seniority level
Mid-Senior level
Employment type
Contract
Job function
Quality Assurance
Industries
Oil and Gas
#J-18808-Ljbffr

Job Description & Requirements
Review the inspection history to summarize the integrity status of the plant equipment and piping systems.
Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.
Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan.
Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).
Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.
Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.
Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.
Provide recommendations and timely updates on equipment degradation problems.
Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.
Preparation of final inspection reports with all findings, abnormalities and recommendations.
Ensure quality of inspected items to meet project requirements and standards.
Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.
Read, understand project related ITP, procedures, specification requirements.
Review documents and drawings as per specification – Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.
Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication.
Knowledge in welding inspection.
Eligibility Criteria
Graduate Engineers with 3-6 years of relevant experience.
Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.
Experience in Refinery and Oil & Gas must.
Experience in QA/QC and Knowledge in Non-Destructive Testing methods.
Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.
Work Independently and can work in Singapore and other countries.
Fluent Reading, Speaking and Writing in English.
Willing to commit 24 months contract/ project completion.
Team Worker, Mature, Meticulous, Pro‐Active Work Attitude & Work Independent.
Energetic & Result Orientated.
#J-18808-Ljbffr

Requirements:
Recognized Degree in related field
Experience in working with Contractors
Relevant experience in Civil/ Building, preferably with experience in facade installation works
Good team player and adaptable to dynamic environment
Responsibilities:
Responsible for effective implementation of overall project quality management system (QMS).
Preparation of relevant reports for recommendation and continuously improvements for the project.
Responsible for managing team of QA/QC engineers.
Preparation and compilation of Inspection and Test Plan (ITP), Project Quality Plan (PQP) and Operation Maintenance and Manual (OMM).
Ensure the requirements of Project Quality Plan/Manual is implemented and adhered to the assigned project.
Liaise with Clients' and Sub-Contractors' Quality representatives.
Participate in audits by Clients' team of the Company's systems implemented on assigned Projects.
Investigate and document and resolve any Clients' complaints about Quality.
Make recommendations to Project team regarding improvements on Quality.
Assist Project and QA/QC Team in inspection and testing as necessary.
Liaise with Independent Inspection and Testing Agency in respect of factory and Site inspections in line with Project Specification requirements.
Maintaining, improving and implementing Project Quality system and Quality plans in conjunction with the project team.
Investigation of Quality deficiencies and implementation of corrective action as well as recommendation for preventive actions.
Identify and document Quality problems, seek solutions and verify the implementation of solutions.
Any other duties as directed by Managing Director
Checking that all non-conforming materials, components and equipment are promptly identified and segregated pending their final disposition.
Liaise with RE/RTO and all other parties in respect of inspection and handing over of installed steel and facade elements.
Perform inspection and check for all quality related procedures.
Coordinate with the managers and supervisors of the projects.
Responsible for closure of Non-conformance reports and Site Instruction.
#J-18808-Ljbffr

Job Description & Requirements

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

· Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated

Job Description & Requirements

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

· Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

Job Description & Requirements

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

· Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated

Job Description & Requirements

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

· Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

Job Purpose

Lead and manage the company’s QA/QC system across all EPC/EPCM projects to ensure full compliance with project specifications, client requirements, codes, and regulatory standards while fostering a strong quality culture.

Key Responsibilities

• Develop, implement, and maintain the Quality Management System (QMS) aligned with ISO standards and project requirements.
• Prepare and review Project Quality Plans, ITPs, method statements, and QA/QC procedures .
• Lead internal and external quality audits , including subcontractor and supplier assessments.
• Manage and oversee inspections and testing activities across projects.
• Lead NCR management, root cause analysis, corrective and preventive actions .
• Prepare and present quality performance reports and KPIs to management and clients.
• Conduct quality training and awareness programs for project teams.
• Liaise with clients, consultants, and regulatory bodies on all QA/QC matters.
• Drive continuous improvement initiatives to enhance quality performance.

Qualifications & Experience

• Degree in Mechanical, Electrical, Civil Engineering, or Quality Management.
• 10+ years of QA/QC experience in EPC/EPCM or construction, with 3+ years in a managerial role.
• ISO 9001 Lead Auditor certification preferred.
• Experience with BCA CONQUAS/QM implementation.

Core Competencies

• Strong leadership and team management skills.
• In-depth knowledge of QA/QC codes, standards, and processes.
• Excellent communication, report writing, and analytical skills.

Job description

• To develop, control and continuously improve the Management Systems (MS) such as HACCP / Food Safety in accordance to company's requirements and to provide support to all divisions in managing quality related issues.
• Procedures (standard operating procedures) and working instructions are maintained and updated regularly.
• To oversee all internal audits and to ensure that feedback is provided to improve performance.
• To assist in preparation of the organization for customer audits and external accreditation reviews (e.g. HACCP).
• To develop effective non-conformance, corrective action loops ensuring that recurrence of non-conformance is avoided.
• Conceptualize new label or pamphlet designs and design with Adobe Photoshop or Adobe Illustrator (preferred).
• Basic understanding of Sales of Food Act to ensure conformance in label & carton design.
• Order stickers: Work with departments to order stickers when stock runs low, work with Sales to ensure stocks to order are sufficient.
• Order corporate brochure.
• To take charge of online correspondence with government bodies such as SPRING Singapore and IE Singapore to discuss initiatives, incentive programs, and facilitates claims, where applicable.
• Generate weekly and monthly sales report for management & sales team.
• Take minutes for internal & external meetings.

Requirements

• Diploma and/or above in food science or related field
• Microsoft Office applications
• Able to work in a fast-paced environment
• Alternate Saturday off
• Entry level