1,013 Qc Technician jobs in Singapore

Join to apply for the QC Technician role at Thermo Fisher Scientific

3 days ago Be among the first 25 applicants

Join to apply for the QC Technician role at Thermo Fisher Scientific

When you’re part of the team at Thermo Fisher Scientific, you’ll do important work. Surrounded by collaborative colleagues, you’ll have the support and opportunities that only a global leader can give you. Our respected, growing organization has an outstanding strategy for the near term and beyond. Take your place on our strong team, and help us make significant contributions to the world.

Location/Shift Specific Information

Singapore - No. 7 Gul Circle

Shift - 12 hours rotating shift (Shift change every 4 months)

Discover Impactful Work:

• Perform QC testing of GeneChip products to ensure compliance with quality specifications, particularly in compliance with ISO 13485, MDSAP and 21- CFR – 820 requirements.
• Perform target preparation for Cytoscan and Axiom.
• Support in lab investigation relating to product failures & participate in the implementation of corrective actions as necessary.
• Support and conduct experiment /analysis to support new product release & enhancement of test methods.
• Support FQC Shift lead and Supervisors in accomplishing tasks as assigned.
  
  

• This telephone line is reserved solely for job seekers with disabilities requiring accessibility assistance or an accommodation in the job application process. Messages left for other purposes, such as not being able to get into the career website, following up on an application, or other non-disability related technical issues will not receive a response.
  
  

• Seniority level Not Applicable

• Employment type Full-time

• Job function Quality Assurance, Product Management, and Engineering
• Industries Pharmaceutical Manufacturing and Biotechnology Research

Referrals increase your chances of interviewing at Thermo Fisher Scientific by 2x

Get notified about new Quality Control Technician jobs in Singapore, Singapore .

Johor Baharu, Johore, Malaysia 4 months ago

We’re unlocking community knowledge in a new way. Experts add insights directly into each article, started with the help of AI.

• Perform in-process and final product inspections according to work instructions and specifications.
• Conduct tests on raw materials, semi-finished, and finished products using tools like calipers, micrometers, hardness testers, etc.
• Document inspection results and maintain detailed QC records.
• Identify non-conforming products and assist in root cause analysis and corrective action implementation.
• Support calibration and maintenance of measuring and test equipment.
• Participate in internal audits and continuous improvement activities.
• Collaborate with production teams to ensure quality objectives are met.

• Bachelor’s Degree in Engineering, Industrial Technology, Manufacturing, or a related field.
• 1–3 years of QC or QA experience in a manufacturing environment.
• Familiar with quality control processes, tools, and techniques.
• Knowledge of measurement tools and test equipment used in manufacturing quality control.
• Ability to read and interpret technical drawings and specifications.
• Strong analytical, observation, and documentation skills.
• Team player with good communication skills.

Job Description

When you’re part of the team at Thermo Fisher Scientific, you’ll do important work. Surrounded by collaborative colleagues, you’ll have the support and opportunities that only a global leader can give you. Our respected, growing organization has an outstanding strategy for the near term and beyond. Take your place on our strong team, and help us make significant contributions to the world.

Singapore - No. 7 Gul Circle

Shift - 12 hours rotating shift (Shift change every 4 months)

• Perform QC testing of GeneChip products to ensure compliance with quality specifications, particularly in compliance with ISO 13485, MDSAP and 21- CFR – 820 requirements.
• Perform target preparation for Cytoscan and Axiom.
• Support in lab investigation relating to product failures & participate in the implementation of corrective actions as necessary.
• Support and conduct experiment /analysis to support new product release & enhancement of test methods.
• Support FQC Shift lead and Supervisors in accomplishing tasks as assigned.

We offer competitive remuneration, annual incentive plan bonus, healthcare, and a range of employee benefits. Thermo Fisher Scientific offers employment with an innovative, forward-thinking organization, and outstanding career and development prospects. We offer an exciting company culture that stands for integrity, intensity, involvement, and innovation!

Our Mission is to enable our customers to make the world healthier, cleaner and safer. Watch as our colleagues explain 5 reasons to work with us . As one team of 100,000+ colleagues, we share a common set of values - Integrity, Intensity, Innovation and Involvement - working together to accelerate research, solve complex scientific challenges, drive technological innovation and support patients in need. #StartYourStory at Thermo Fisher Scientific, where diverse experiences, backgrounds and perspectives are valued.

Thermo Fisher Scientific is an EEO/Affirmative Action Employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran status, disability or any other legally protected status.

Job Seekers with a Disability: Thermo Fisher Scientific offers accessibility service for job seekers requiring accommodations in the job application process. For example, this may include individuals requiring assistance because of hearing, vision, mobility, or cognitive impairments. If you are a job seeker with a disability, or assisting a person with a disability, and require accessibility assistance or an accommodation to apply for one of our jobs, please submit a request by telephone at 1- *. Please include your contact information and specific details about your required accommodation to support you during the job application process.

*This telephone line is reserved solely for job seekers with disabilities requiring accessibility assistance or an accommodation in the job application process. Messages left for other purposes, such as not being able to get into the career website, following up on an application, or other non-disability related technical issues will not receive a response.

About Company:
Our client was established in 1997. A wholly owned subsidiary of a major chemical company in Japan. They produce Super-Pure Hydrogen Peroxide and Ammonium Hydroxide for the semiconductor industry.

Job Description:
- Reports to the section engineer and/or designate
- Carry out all laboratory tests and measurements accurately in accordance to procedure and upkeep/maintain the instruments/facilities in good running conditions
- Prepares standards and reagents for analysis in accordance to procedure and ensure that all related documentation is maintained
- Perform basic maintenance and troubleshooting of instruments and write the maintenance report after troubleshooting/maintenance
- Handle ISO Documentation/Raw Data for QA Department
- Accurately update internal Statistical Process Control (SPC) charts and monitor the charts
- Assist in training for staff for QC Section-related activities when required
- Maintains and checks inventory of all storage samples and ensure all relevant records are maintained
- Perform receiving of QA department purchase and ensure that received items and all related document are correct at the point of receipt
- Assist in audit preparation
- Support the QA Section in its activities as and when required
- Involved in near miss identification and provide work improvement (QEHS) suggestions
- Maintains the general upkeep and cleanliness of the laboratory and related areas by performing housekeeping
- Strictly adhere to all EHS/QMS procedures in all aspects of the activities and observe line discipline and 5S
- Performs any other tasks as instructed by the supervisor, engineer, QC section manager and HOD

Job Requirements:
- Diploma in Chemical or science discipline preferred
- Those with no experience are welcome to apply
- Experience with analytical instruments like ICP-MS, AAS, etc.
- Ability to communicate clearly in both writing and verbally and good interpersonal skills
- Basic understanding of ISO9001, ISO14001 and OHSAS18001 standards will be an advantage
- Proficient in Microsoft Office Tools
- Able to work in cleanroom environment

Compensation:
- Work location: Tuas, Singapore
- Working hour: Monday to Friday, 8.30am to 5.30pm
- Overtime and night shift may required
- Uniform provided.
- Annual leaves of 14 days (+1 additional day per completed year)
- Annual Wage Supplement entitlement
- Variable bonus
- Variable allowances (Transport and shift allowance)
- Medical and dental benefits

Location : 15 Joo Koon Circle, pick up points at MRT stations (Boon Lay, Pioneer, Choa Chu Kang, Jurong East, Woodlands)

Benefits:

• Transport allowance: $240/month
• Shift Allowance: $4/night
• Shift Premium: 200/month
• Annual Wage Supplement (AWS) of 1-month basic salary
• Variable Bonus

Responsibilities:

• Perform auxiliary / component incoming inspection per procedure.
• Perform mold-line in-process inspection per procedure.
• Perform semi-finish / finished goods inspection (visual / dimensional / document review) per procedure.
• Participate in product characteristics trend monitoring and effective escalation and follow-ups.
• Ensure all inspection activities are accurate and adequately documented (e.g. SAP system, Ms. Office, etc.)
• Exercise appropriate control to documentation records and retained samples.
• Ensure all related calibration activities are timely and appropriately performed.
• Support non-routine assignments initiated by supervisors (e.g. Handle customer complaint, Mold-monitoring activities, etc.)
• Other duties as assigned by superior.

Education and Experience:

• Able to work night shift - 7pm to 7.15am
• Academic qualification preferably Nitec or Higher Nitec in Engineering or relevant fields, and/or equivalent qualification
• Computer literate (e.g. Ms. Office skills).
• Good communication & teamwork skills.
• Self-motivated and positive thinking.
• Added advantage with cGMP and ISO working experience.
• Preferably with exposure to medical device, pharmaceutical or related manufacturing environment.

Enjoy a responsible role working in a small team of highly experienced production operators in a clean manufacturing environment. Get away from inspecting the same item every day, join our team to increase your exposure to a high mix of materials and components.

Requirements

• Minimum NiTEC | Certificate (or equivalent) or ASNT | PCN in an NDT discipline
• Existing working knowledge of piping components
• Use XRF PMI machines (training provided)
• Well versed in the use of micrometers, verrniers, thread gauges and other measuring equipment
• Able to read and understand international dimensional specifications

Responsibilities

• Measure components against dimensions and tolerances on engineering drawings
• Calibrate quality control instrument and equipment
• Inspect finished items and incoming raw materials for compliance
• Compile inspection reports
• Assist staff with inspection tasks and other ad hoc duties

Advantages

The following optional skills or work experience would be an advantage

• An existing ASNT or PCN qualification in dye-pen or other NDT

Others

• 5.5 days per week (overtime available)
• Jurong (25 mins direct bus from Boon Lay MRT)

Information:

• Salary: $2000 - $,500 Basic
• Attendance: 25
• Working hours: Mon - Fri, 8am - 5.15pm

Responsibilities:

• Perform sampling incoming quality inspection
• Perform using equipment such as Vernier Caliper, Micrometer, Guages, Profile Projector and Smart Scope

Requirements:

• 'O' Level / ITE/Diploma

Interested applicants, send in your updated resume by clicking "Apply Now".

Michelle Koh

EA License No.: 23C1894

EA Personnel No.: R1656105

Location : 15 Joo Koon Circle, pick up points at MRT stations (Boon Lay, Pioneer, Choa Chu Kang, Jurong East, Woodlands)

Benefits:

• Transport allowance: $240/month
• Shift Allowance: $4/night
• Shift Premium: 200/month
• Annual Wage Supplement (AWS) of 1-month basic salary
• Variable Bonus

Responsibilities:

• Perform auxiliary / component incoming inspection per procedure.
• Perform mold-line in-process inspection per procedure.
• Perform semi-finish / finished goods inspection (visual / dimensional / document review) per procedure.
• Participate in product characteristics trend monitoring and effective escalation and follow-ups.
• Ensure all inspection activities are accurate and adequately documented (e.g. SAP system, Ms. Office, etc.)
• Exercise appropriate control to documentation records and retained samples.
• Ensure all related calibration activities are timely and appropriately performed.
• Support non-routine assignments initiated by supervisors (e.g. Handle customer complaint, Mold-monitoring activities, etc.)
• Other duties as assigned by superior.

Education and Experience:

• Able to work night shift - 7pm to 7.15am
• Academic qualification preferably Nitec or Higher Nitec in Engineering or relevant fields, and/or equivalent qualification
• Computer literate (e.g. Ms. Office skills).
• Good communication & teamwork skills.
• Self-motivated and positive thinking.
• Added advantage with cGMP and ISO working experience.
• Preferably with exposure to medical device, pharmaceutical or related manufacturing environment.