183 Propulsion Engineer jobs in Singapore

• Perform MRO services, covering planning, troubleshooting, diagnosing, minor repair and complete overhaul of major OEM marine propulsion equipment
• Generate field service report with appropriate photos of before and after repair for the final report to client
• Perform commissioning of new gearbox involving yard, basin and sea trials
• Able to interpret electrical drawings and perform basic troubleshooting of faults on electrical system with minimum guidance
• Assist Workshop Manager to prepare parts quotation for Purchaser to procure spares to conduct repair and / or overhaul
• Conduct daily Tool Box meeting and ensure compliance with workplace safety and health practices
• Ad-hoc duties as required in the workshop

Requirements

• At least Degree or Diploma in Mechanical Eng
• At least 3 years of exp in Marine Industry in propulsion
• Must be able to perform troubleshooting on propulsion related equipment with minimum guidance
• Require to travel overseas for assignment.
• Must be able to be deployed within short notice period
• Must possess good verbal and written English communication skills

Kindly understand that only shortlisted candidates will be notified.

Welead Solutions Pte Ltd

Poon Wai Soon, Bernard

Reg. No: R2197713

EA License No.: 23C1882

• Perform MRO services, covering planning, troubleshooting, diagnosing, minor repair and complete overhaul of major OEM marine propulsion equipment
• Generate field service report with appropriate photos of before and after repair for the final report to client
• Perform commissioning of new gearbox involving yard, basin and sea trials
• Able to interpret electrical drawings and perform basic troubleshooting of faults on electrical system with minimum guidance
• Assist Workshop Manager to prepare parts quotation for Purchaser to procure spares to conduct repair and / or overhaul
• Conduct daily Tool Box meeting and ensure compliance with workplace safety and health practices
• Ad-hoc duties as required in the workshop

Requirements

• At least Diploma or higher in Mechanical Eng
• At least 3 years of exp in Marine Industry in propulsion
• Must be able to perform troubleshooting on propulsion related equipment with minimum guidance
• Require to travel overseas for assignment.
• Must be able to be deployed within short notice period
• Must possess good verbal and written English communication skills

Kindly understand that only shortlisted candidates will be notified.

Welead Solutions Pte Ltd

Poon Wai Soon, Bernard

Reg. No: R2197713

EA License No.: 23C1882

• Perform MRO services, covering planning, troubleshooting, diagnosing, minor repair and complete overhaul of major OEM marine propulsion equipment
• Generate field service report with appropriate photos of before and after repair for the final report to client
• Perform commissioning of new gearbox involving yard, basin and sea trials
• Able to interpret electrical drawings and perform basic troubleshooting of faults on electrical system with minimum guidance
• Assist Workshop Manager to prepare parts quotation for Purchaser to procure spares to conduct repair and / or overhaul
• Conduct daily Tool Box meeting and ensure compliance with workplace safety and health practices
• Ad-hoc duties as required in the workshop

Requirements

• At least Degree in Mechanical Engineering or related subjects
• At least 3 years of exp in Marine Industry in propulsion
• Must be able to perform troubleshooting on propulsion related equipment with minimum guidance
• Require to travel overseas for assignment.
• Must be able to be deployed within short notice period
• Must possess good verbal and written English communication skills

Kindly understand that only shortlisted candidates will be notified.

Welead Solutions Pte Ltd

Poon Wai Soon, Bernard

Reg. No: R2197713

EA License No.: 23C1882

• Perform MRO services, covering planning, troubleshooting, diagnosing, minor repair and complete overhaul of major OEM marine propulsion equipment
• Generate field service report with appropriate photos of before and after repair for the final report to client
• Perform commissioning of new gearbox involving yard, basin and sea trials
• Able to interpret electrical drawings and perform basic troubleshooting of faults on electrical system with minimum guidance
• Assist Workshop Manager to prepare parts quotation for Purchaser to procure spares to conduct repair and / or overhaul
• Conduct daily Tool Box meeting and ensure compliance with workplace safety and health practices
• Ad-hoc duties as required in the workshop

Requirements

• At least Degree in Mechanical Eng
• At least 3 years of exp in Marine Industry in propulsion
• Must be able to perform troubleshooting on propulsion related equipment with minimum guidance
• Require to travel overseas for assignment.
• Must be able to be deployed within short notice period
• Must possess good verbal and written English communication skills

Kindly understand that only shortlisted candidates will be notified.

Welead Solutions Pte Ltd

Poon Wai Soon, Bernard

Reg. No: R2197713

EA License No.: 23C1882

Organisation/Company SINGAPORE INSTITUTE OF TECHNOLOGY (SIT) Research Field Engineering Researcher Profile First Stage Researcher (R1) Country Singapore Application Deadline 31 Dec 2025 - 00:00 (UTC) Type of Contract Other Job Status Full-time Is the job funded through the EU Research Framework Programme? Not funded by a EU programme Is the Job related to staff position within a Research Infrastructure? No
Offer Description
As a University of Applied Learning, SIT works closely with industry in our research pursuits. Our research staff will have the opportunity to be equipped with applied research skill sets that are relevant to industry demands while working on research projects in SIT.
The primary responsibility of this role is to deliver on an industry innovation research project where you will be part of the research team to perform modelling and real-time simulation of electric vessel’s onboard microgrid and propulsion system.
Key Responsibilities
Participate in and manage the research project with Principal Investigator (PI), Co-PIs and the research team members to study, evaluate, propose and innovate solutions to the marine electrical propulsion systems of various e-vessel types including their protections and energy management to enhance reliability, safety, efficiency, density and to reduce the total cost of ownership.
Work with research team to deliver the work scope and undertake the following responsibilities in the project.
Develop digital twins of the detailed electrical power system architectures of various e-vessels based on the concept design in real-time simulation environment such as OPAL-RT and/or Typhoon HIL and conduct real time simulation studies/experimentation.
Design and develop an intelligent and optimal energy management system (EMS) controller for the optimal operation and coordinated control of e-vessel microgrid of multiple energy sources considering cost, carbon, and operation constraints.
Perform HIL/real-time simulation studies/experiments with EMS controller for various cases to demonstrate performance and recommend improvements at unit, sub-system and whole system level.
Dynamic, thermal, and stability analysis of the electrical propulsion systems of various e-vessel types
Perform simulation studies for onboard microgrid and connection to shore charging infrastructure including protection systems and their coordination
Propose and innovate solutions for operational challenges in hardware such as common mode noise, electromagnetic interference, filter design, etc.
Evaluate and recommend efficient and reliable power system architecture(s) with other merits of high-density and light-weight.
Carry out Risk Assessment, and ensure compliance with Work, Safety and Health Regulations.
Test the relevant power electronics and drives system hardware and troubleshoot the challenging problems.
Work independently, as well as within a team, to ensure proper operation and maintenance of equipment and assist in laboratory management.
Coordinate procurement and liaison with vendors/suppliers.
Mentor students involved in the research project
For those hired at senior levels, management responsibilities may be included
Job Requirements
Have a Master’s or PhD’s degree in Electrical Engineering or equivalent from a recognized University. Major in Power Engineering will be advantageous.
Minimum 5 years of relevant experience in power electronics, drives, control algorithms, optimization techniques, and optimal energy management algorithm development for the optimal operation of the microgrid system.
Strong knowledge of power electronics, drives, and control is highly preferred. Experience with hardware testing and real-time simulation will be advantageous.
Knowledge and experience in fault diagnosis and analysis and protection systems will be advantageous
Knowledge of software such as ETAP and MATLAB/Simulink
Prior knowledge and experience in marine electrical propulsion system architectures and digital twins will be a bonus
Experienced and committed to participating in project meetings.
Self-motivated team player and good project management skills.
Excellent communication and interpersonal skills.
Able to build and maintain healthy working relationships with people within (staff and PIs/co-PIs within the programme) and external to the university (industry partners and funding agencies).
Self-directed learner who believes in continuous learning and development
Proficient in technical writing and presentation
Possess strong analytical and critical thinking skills
Show strong initiative and take ownership of work
#J-18808-Ljbffr

Founded in the early 1960s, Tacam Steel was created to support public housing and industrial growth. They initially gained recognition for their steel and aluminum window louvres, which were among the first locally manufactured products to receive a U.K. patent. Over the years, Tacam Steel has become a leading steel door manufacturer in the region, known for high-quality, performance-specific steel doors. Today, they are part of the Techsteel Corporation Group and have a strong reputation for their products used in prestigious buildings across the UK, Singapore, Malaysia, and other regions.

Key roles and responsibilities

1. Technical Support & Product Development

· Partner with the Technical Manager in all technical matters relating to design, manufacturing process control, and new product development.

· Liaise with Professional Engineers to obtain endorsed calculations for pressure-rated or blast-rated door sets.

· Support Sales and Processing departments on technical aspects concerning door performance requirements. (fire, acoustic, structural).

2. Testing & Compliance

· Coordinate fire, acoustic, and mock-up testing (internal/external), inspect test specimens, and interpret results.

· Prepare detailed test report while ensuring timely renewal of Certificates of Conformity.

· Ensure compliance with Singapore standards (BCA) and international certifications (ISO), and other certifications.

3. Process Improvement & Troubleshooting

· Collaborate with cross-functional teams to troubleshoot production issues and implement corrective action.

· Drive continuous improvement initiatives for mechanical and electromechanical systems.

4. Documentation & Project Support

· Prepare and maintain accurate technical documentation, including test reports and performance summaries.

· Collaborate with department heads and process supervisors to troubleshoot issues and implement/monitor preventive and corrective actions for continuous improvement.

Requirements

Must-Have (Critical Core Skills):

· Bachelor's in mechanical / mechatronics engineering

· A minimum of 5 years of experience in designing for high mix low volume manufacturing environment

. Strong working knowledge of material properties and steel fabrication processes including welding

· Proficient in AutoCAD for architectural drafting.

· Ability to work independently with minimal supervision.

· Strong problem-solving skills and attention to detail.

Good-to-Have (Emerging Skills):

· Familiarity with Revit / BIM Modelling for door system integration.

· Knowledge in theoretical calculations related to the field of statics, dynamics and kinematics.

· Prior working experience in metal door manufacturing and fire certification testing.

• Develop and design mechanical and plumbing systems (HVAC, hot/cold water, drainage, medical gases) using software like AutoCAD and BIM.
• Collaborate with architects, project managers, and contractors to develop project plans and budgets.
• Review contractor submittals, shop drawings, and technical documents for mechanical and plumbing services.
• Assist in the creation and revision of maintenance and test plans for systems.
• Strong communication and teamwork skills to work effectively with diverse project stakeholders.
• Ability to perform field inspections, testing, and supervision of on-site installation work.

• Develop and design mechanical and plumbing systems (HVAC, hot/cold water, drainage, medical gases) using software like AutoCAD and BIM .
• Collaborate with architects, project managers, and contractors to develop project plans and budgets.
• Review contractor submittals, shop drawings, and technical documents for mechanical and plumbing services.
• Assist in the creation and revision of maintenance and test plans for systems.
• Strong communication and teamwork skills to work effectively with diverse project stakeholders.
• Ability to perform field inspections, testing, and supervision of on-site installation work.

• Develop and design mechanical and plumbing systems (HVAC, hot/cold water, drainage, medical gases) using software like AutoCAD and BIM .
• Collaborate with architects, project managers, and contractors to develop project plans and budgets.
• Review contractor submittals, shop drawings, and technical documents for mechanical and plumbing services.
• Assist in the creation and revision of maintenance and test plans for systems.
• Strong communication and teamwork skills to work effectively with diverse project stakeholders.
• Ability to perform field inspections, testing, and supervision of on-site installation work.