2,694 Product Engineers jobs in Singapore

Overview:

WHAT YOU DO AT AMD CHANGES EVERYTHING

We care deeply about transforming lives with AMD technology to enrich our industry, our communities, and the world. Our mission is to build great products that accelerate next-generation computing experiences – the building blocks for the data center, artificial intelligence, PCs, gaming and embedded. Underpinning our mission is the AMD culture. We push the limits of innovation to solve the world's most important challenges. We strive for execution excellence while being direct, humble, collaborative, and inclusive of diverse perspectives.

AMD together we advance_

Responsibilities:

THE ROLE:

Staff Test Engineer is responsible for the test solution for a next-generation AMD Product. This position serves as the Test Engineering team's Technical member and go-to expert for solutions. This position requires engagement with Product, Design, Platform Engineering, Device Analysis, Quality and Reliability Engineering to attain test and characterization plan, 1st silicon bring-up, silicon debug, attainment and optimization of yield and performance distributions, test costs and product quality for next-generation AMD products.

THE PERSON:

We are looking for is one with a passion towards technical development, possesses broad technical leadership, critical problem solving and troubleshooting skills. The person must be a team player and have good and effective communications to deep dive into technical discussion with other members across the globe and use data to illustrate their points.

You will be independent, self-starter, well organized and have the sense of responsibility to see projects through beginning to the end. This person is expected to be market savvy and comfortable in a multi-tasking environment.

KEY RESPONSIBILITIES:

Key responsibilities for this role will differ according to the product life cycle and are as below:

• New product introduction phase:
• • Developing characterization and test coverage strategies/plans during pre-silicon phase
• Establishing pattern requirements and driving Design Verification deliveries during pre-silicon phase
• Executing the defined characterization and test plans on new silicon
• Design Wafer and Package Level Fuse modules for Test Programs
• Silicon Bring up and Post Silicon ownership including validation of Test Programs
• Perform new device characterization, circuit sensitivity analysis, interpret findings, guide deep-dive investigations to root-cause, and/or provide mitigation actions.
• Interface with global teams across the organization on root cause resolution for device failures.

• Foster and develop new ideas/concepts in device test/debug/DFT/DFM and follow-through to deliverable outcomes.

• Product health and cost target attainment during production phase:

• • Optimize test contents to meet/exceed business goal
• Lead effort to optimize product margin to meet business requirements, from Fab to Back-end-Test.

PREFERRED EXPERIENCE:

• Years of experiences in the Semiconductor industry.
• Experience must include technical and specialized knowledge in the areas below:
• • Strong DFT and ATE test methodologies.
• End to end ATE Test Prog development, validation and Debug skills including Pre and Post Silicon
• High Speed IO and AMS Pattern development and debug
• Strong ATE & test class/method development experience with Advantest 93k preferred.
• Test development experience of more than 1 full product cycle is preferred.
• Strong Python/Java/Perl/C++ coding skills
• Experience with Mentor or Synopsys or Cadence EDA tools or System Level Testing a plus

ACADEMIC CREDENTIALS:

• Bachelor/Master in Electrical/Electronic Engineering

LOCATION:

Singapore

Qualifications:

Benefits offered are described: AMD benefits at a glance.

AMD does not accept unsolicited resumes from headhunters, recruitment agencies, or fee-based recruitment services. AMD and its subsidiaries are equal opportunity, inclusive employers and will consider all applicants without regard to age, ancestry, color, marital status, medical condition, mental or physical disability, national origin, race, religion, political and/or third-party affiliation, sex, pregnancy, sexual orientation, gender identity, military or veteran status, or any other characteristic protected by law. We encourage applications from all qualified candidates and will accommodate applicants' needs under the respective laws throughout all stages of the recruitment and selection process.

Engineer, Product Development (Fresh Grad)
is responsible for development and establishment of new product and transfer process into production.

Responsibilities

• New product development as requested by customer and internal roadmap, and transfer into production
• New material, process & machine development and qualification, and transfer into production
• Troubleshoot process issue and improve process capabilities, yield and cycle time from customer NPI stage to LVM/HVM stage.
• Establish, review and update specifications, workflow, quality and safety related documentation for new products and transfer to production line.
• Coordinate and liaise with vendor/suppliers on process issue or quality issue.
• Support customer NPI activities and internal engineering activities.
• Handle and manage customer audits and 8D reports.
• Any other ad-hoc duties as assigned.

Requirement

• Minimum bachelor's degree in materials science, microelectronics, electrical or chemical engineering
• Knowledge in process engineering, process control engineering and yield enhancement preferred
• Knowledge in DOE, FMEA, and 8D reports
• Experience in semiconductor industry would be an added advantage

Engineer, Product Development is responsible for development and establishment of new product and transfer process into production.

Responsibilities

• New product development as requested by customer and internal roadmap, and transfer into production
• New material, process & machine development and qualification, and transfer into production
• Troubleshoot process issue and improve process capabilities, yield and cycle time from customer NPI stage to LVM/HVM stage.
• Establish, review and update specifications, workflow, quality and safety related documentation for new products and transfer to production line.
• Coordinate and liaise with vendor/suppliers on process issue or quality issue.
• Support customer NPI activities and internal engineering activities.
• Handle and manage customer audits and 8D reports.
  Any other ad-hoc duties as assigned.

Requirements

• Minimum bachelor's degree in materials science, microelectronics, electrical, chemical engineering or similar disciplines
• Experience in semiconductor manufacturing industry and working in cleanroom environment
• Minimum 3 years hands-on experience in product development or NPI work in area of Wafer-level Fanout packaging production line or LCD/FPD production line, focusing on Pick and Place/Die Attach process.
• Knowledge in process engineering, process control engineering and yield enhancement
• Experience in DOE, FMEA, and 8D reports

Engineer, Product Development
is responsible for development and establishment of new product and transfer process into production.

Responsibilities

• New product development as requested by customer and internal roadmap, and transfer into production
• New material, process & machine development and qualification, and transfer into production
• Troubleshoot process issue and improve process capabilities, yield and cycle time from customer NPI stage to LVM/HVM stage.
• Establish, review and update specifications, workflow, quality and safety related documentation for new products and transfer to production line.
• Coordinate and liaise with vendor/suppliers on process issue or quality issue.
• Support customer NPI activities and internal engineering activities.
• Handle and manage customer audits and 8D reports.
• Any other ad-hoc duties as assigned.

Requirements

• Minimum bachelor's degree in materials science, microelectronics, electrical, chemical engineering or similar disciplines

• Minimum 3-years' experience in product development or NPI work in area of Wafer-level Fanout packaging production line or LCD/FPD production line, focusing on processes such as:

• Die Preparation

• Recon
• Lithography
• PVD
• Wet etch

• Backend

• Knowledge in process engineering, process control engineering and yield enhancement

• Experience in DOE, FMEA, and 8D reports

Overview:

WHAT YOU DO AT AMD CHANGES EVERYTHING

We care deeply about transforming lives with AMD technology to enrich our industry, our communities, and the world. Our mission is to build great products that accelerate next-generation computing experiences – the building blocks for the data center, artificial intelligence, PCs, gaming and embedded. Underpinning our mission is the AMD culture. We push the limits of innovation to solve the world's most important challenges. We strive for execution excellence while being direct, humble, collaborative, and inclusive of diverse perspectives.

AMD together we advance_

Responsibilities:

THE ROLE:

Staff Test Engineer is responsible for the test solution for a next-generation AMD Product. This position serves as the Test Engineering team's Technical member and go-to expert for solutions. This position requires engagement with Product, Design, Platform Engineering, Device Analysis, Quality and Reliability Engineering to attain test and characterization plan, 1st silicon bring-up, silicon debug, attainment and optimization of yield and performance distributions, test costs and product quality for next-generation AMD products.

THE PERSON:

We are looking for is one with a passion towards technical development, possesses broad technical leadership, critical problem solving and troubleshooting skills. The person must be a team player and have good and effective communications to deep dive into technical discussion with other members across the globe and use data to illustrate their points.

You will be independent, self-starter, well organized and have the sense of responsibility to see projects through beginning to the end. This person is expected to be market savvy and comfortable in a multi-tasking environment.

KEY RESPONSIBILITIES:

Key responsibilities for this role will differ according to the product life cycle and are as below:

• New product introduction phase:
• • Developing characterization and test coverage strategies/plans during pre-silicon phase
• Establishing pattern requirements and driving Design Verification deliveries during pre-silicon phase
• Executing the defined characterization and test plans on new silicon
• Design Wafer and Package Level Fuse modules for Test Programs
• Silicon Bring up and Post Silicon ownership including validation of Test Programs
• Perform new device characterization, circuit sensitivity analysis, interpret findings, guide deep-dive investigations to root-cause, and/or provide mitigation actions.
• Interface with global teams across the organization on root cause resolution for device failures.
• Foster and develop new ideas/concepts in device test/debug/DFT/DFM and follow-through to deliverable outcomes.
• Product health and cost target attainment during production phase:
• • Optimize test contents to meet/exceed business goal
• Lead effort to optimize product margin to meet business requirements, from Fab to Back-end-Test.

PREFERRED EXPERIENCE:

• Strong hands on experiences in the Semiconductor industry.
• Experience must include technical and specialized knowledge in the areas below:
• • Strong DFT and ATE test methodologies.
• End to end ATE Test Prog development, validation and Debug skills including Pre and Post Silicon
• Design and review of ATE Hardware (DIB) Design Guidelines
• Strong ATE & test class/method development experience with Advantest 93k preferred.
• Test development experience of more than 1 full product cycle is preferred.
• Strong Python/Java/Perl/C++ coding skills
• Experience with Mentor or Synopsys or Cadence EDA tools or System Level Testing a plus

ACADEMIC CREDENTIALS:

• Bachelor/Master in Electrical/Electronic Engineering

LOCATION:

Singapore

Qualifications:

Benefits offered are described: AMD benefits at a glance.

AMD does not accept unsolicited resumes from headhunters, recruitment agencies, or fee-based recruitment services. AMD and its subsidiaries are equal opportunity, inclusive employers and will consider all applicants without regard to age, ancestry, color, marital status, medical condition, mental or physical disability, national origin, race, religion, political and/or third-party affiliation, sex, pregnancy, sexual orientation, gender identity, military or veteran status, or any other characteristic protected by law. We encourage applications from all qualified candidates and will accommodate applicants' needs under the respective laws throughout all stages of the recruitment and selection process.

Role Overview

In this role, you will have the unique opportunity to engage in Mechanical Design, using Solidworks and AutoCad. This is an exciting position that requires a highly motivated engineer with a keen sense of product development to produce technologically superior products.

Duties and Responsibilities

• Engage in Mechanical Design ,

  ">

  involve in conceptual design proposal, design and compilation of project budget, and develop new project ideas to drive business growth.

  ">

• Meet product quality standards and delivery targets by working closely with experienced team members who prioritize teamwork and collaboration.

  ">

Required Skills and Qualifications

• Hold a degree or diploma in Mechanical/Mechatronics/Precision Engineering;

  ">

• Have an interest in Industrial Automation field;

  ">

• Be proficient in Solidworks/Pro E or other 3D CAD software;

  ">

• Possess at least two years of relevant experience in Industrial Automation projects.

">

Benefits and Opportunities

This role offers a chance to work closely with an experienced team, collaborate on dynamic projects, and contribute to producing high-quality products.

**Job Overview**

As a design engineer, you will be responsible for preparing designs, sketches and reports with supporting calculations for projects. You will also supply drafting staff with information to assist in the production of detailed drawings, the development of quantities, materials lists and cost estimates as required.

Additionally, you will coordinate with suppliers, clients, consultants or commissioning engineers concerning the design, installation or construction and commissioning of assigned work. This includes preparing technical submissions for materials, construction methods and C&S shop drawings.

Other key responsibilities include resolving any construction issues on drawings and liaising closely with relevant departments as well as the authorities, to ensure consistency with contractual technical specifications and statutory rules and regulations. You will also report on work progress during meetings and attend site inspections as required.

• Key Responsibilities:
• supply drafting staff with information to assist in the production of detailed drawings, the development of quantities, materials lists and cost estimates
• coordinate with suppliers, clients, consultants or commissioning engineers concerning the design, installation or construction and commissioning of assigned work
• prepare technical submissions for materials, construction methods and C&S shop drawings
• resolve any construction issues on drawings and liaise closely with relevant departments as well as the authorities
• report on work progress during meetings and attend site inspections

**Required Skills and Qualifications:**

• Qualifications:
• bachelor's degree in a relevant discipline

Benefits: working independently, meeting delivery deadlines, excellent team spirit

Requirements:

• Skills:
• good knowledge of engineering design software and analytical tools
• excellent written and verbal communication skills
• ability to work independently and highly motivated

Work Details:

• Location:
• stationed at the project site in Changi
• 6 working days per week

We are looking for a skilled engineer to drive innovation in product development.

• Analyze technical requirements and develop new products according to implementation plans.
• Create functional specifications, electrical or firmware designs, and prototype models for evaluation.
• Collaborate with Lead Engineers in estimating return on investment and re-designing products according to implementation plans.
• Provide technical support for production lines and parts faculty investigations as needed.

• Bachelor of Mechanical Engineering or equivalent degree.
• Experience in analog or digital electrical hardware design.
• Entry-level candidates welcome to apply.

The ideal candidate should have a passion for innovation and product development. If you are interested in this opportunity, please submit your detailed resume via email to

We are looking for someone with strong technical, analytical, and problem-solving skills, as well as demonstrating the characteristic of an independent and resourceful individual.

The applicant must have a proficient understanding of x86 CPU and GPU architecture and functionality, as well as a broad understanding of various industry standard bus protocols, such as DDR, PCIe, and USB.

KEY RESPONSIBILITIES:

• Accountable to drive and develop SLT test regression infrastructure to test weekly Firmware / Software releases before integration to SLT Test Program
• Pre-emptively surface complex, novel, and non-recurring firmware / software issues and drive to resolution to improve SLT Test Program quality and integration time
• Conduct engineering evaluations and analysis to drive closure of production issues
• Influences technical decisions that have a significant impact on final product
• Develop and apply new debug techniques to enhance technical depth in Product and Test Engineering
• May provide technical supervision or mentoring junior engineers
• Upscale overall team capabilities on low level system debug for client data center product families

PREFERRED EXPERIENCE:

• 5-8 years relevenant industry experience
• Strong knowledge and working experience on X86 architecture, GPU architecture, SoC design and power management features
• Experience and with a good understanding of post silicon electrical and mixed signal circuitries
• Familiar with using analyzers and oscilloscopes, and other debug tools
• Experience with data center infrastructure is a plus
• Strong and effective presentation, written and verbal communication skills, and the ability to work with geographically distributed product engineering teams
• Excellent interpersonal, organizational, and analytical skills
• Software programming and scripting proficiency (C, C++, Java, Perl, Ruby, Java, Python)
• Proficiency in Windows, Unix, and Linux operating systems
• Working hours: Shifts working hours (night/weekend)

ACADEMIC CREDENTIALS:

BS/MS Electrical Engineering, Computer Engineering, or comparable disciplines