104 Plumbing jobs in Singapore

• Install, inspect, service, and repair refrigeration and air conditioning systems.
• Diagnose mechanical and electrical faults in HVAC/R systems.
• Perform routine maintenance on commercial and residential cooling systems.
• Recharge systems with refrigerant and check for leaks.
• Read and interpret technical drawings, schematics, and manuals.
• Calibrate thermostats and ensure systems operate efficiently.
• Maintain records of repairs, maintenance schedules, and compliance checks.
• Comply with health and safety standards and regulations.
• Recommend system upgrades or replacements when needed.
• Work independently or as part of a team in various settings (residential, commercial, or industrial).

• Diploma or Certificate in Refrigeration and Air Conditioning Engineering or equivalent.
• Proven experience as an HVAC/R technician or engineer.
• Knowledge of refrigeration cycles, electrical systems, and control systems.
• EPA or equivalent certification for handling refrigerants (if applicable).
• Strong problem-solving skills and attention to detail.
• Ability to work in confined spaces or at heights, as required.
• Valid driver's license (if fieldwork is involved).
• Good communication and customer service skills.

• Experience with energy-efficient and smart ACMV and HVAC systems.
• Familiarity with Building Management Systems (BMS).
• Knowledge of local HVAC codes and safety regulations.
• Welding and brazing skills.

• Work may involve travel to client sites or facilities.
• May require overtime, weekend, or on-call shifts.
• Work in varying environments, including hot or cold temperatures.
• Technical Skills

1. HVAC System Installation & Repair
   Installing air conditioning, refrigeration, and ventilation systems
   Diagnosing faults and carrying out repairs
2. Refrigeration Cycle Knowledge
   Understanding the thermodynamic cycle (evaporation, compression, condensation, expansion)
3. Electrical & Electronic Skills
   Wiring systems, reading circuit diagrams
   Knowledge of control systems and sensors
4. Mechanical Aptitude
   Understanding of compressors, condensers, evaporators, and fans
   Ability to use tools and machinery safely
5. System Design & Sizing
   Load calculations for appropriate system selection
   Ductwork and piping design
6. Refrigerant Handling
   Safe handling of refrigerants (e.g., R-410A, R-134a)
   Knowledge of recovery, recycling, and leak detection procedures
   EPA 608 certification (or equivalent depending on country)
7. Energy Efficiency & Environmental Compliance
   Knowledge of green technologies (like inverter systems, VRF/VRV systems)
   Awareness of climate regulations and refrigerant phase-outs (e.g., F-Gas regulations)
8. Computer & Software Proficiency
   Using diagnostic tools and software (e.g., BMS systems, HVAC design tools like AutoCAD, Revit MEP)

1. Blueprint Reading
   Interpreting technical drawings and schematics
2. Welding & Brazing
   Joining refrigerant piping and components
3. Preventive Maintenance
   Scheduling and executing regular maintenance
   Keeping detailed service records
4. Testing & Calibration
   Using gauges, multimeters, leak detectors, and pressure sensors

· Obtained a valid Plumber License with PUB in Singapore.

· Supervision of water services works by the company

· Submission to relevant authorities' water service submission

· Advise of Engineers on works that require submissions and procedures

· Ensure compliance of work activities to prevailing regulations

Qualifications/Requirements:

· Holds a valid Plumber License with PUB in Singapore.

· TEAM player

· Positive Attitudes

We are seeking a skilled and experienced Air-Conditioning and Refrigeration Engineer to install, maintain, and repair HVAC (Heating, Ventilation, Air Conditioning) and refrigeration systems. The ideal candidate will ensure optimal performance, energy efficiency, and compliance with safety and environmental standards.

• Install, inspect, service, and repair refrigeration and air conditioning systems.
• Diagnose mechanical and electrical faults in HVAC/R systems.
• Perform routine maintenance on commercial and residential cooling systems.
• Recharge systems with refrigerant and check for leaks.
• Read and interpret technical drawings, schematics, and manuals.
• Calibrate thermostats and ensure systems operate efficiently.
• Maintain records of repairs, maintenance schedules, and compliance checks.
• Comply with health and safety standards and regulations.
• Recommend system upgrades or replacements when needed.
• Work independently or as part of a team in various settings (residential, commercial, or industrial).

• Diploma or Certificate in Refrigeration and Air Conditioning Engineering or equivalent.
• Proven experience as an HVAC/R technician or engineer.
• Knowledge of refrigeration cycles, electrical systems, and control systems.
• EPA or equivalent certification for handling refrigerants (if applicable).
• Strong problem-solving skills and attention to detail.
• Ability to work in confined spaces or at heights, as required.
• Valid driver's license (if fieldwork is involved).
• Good communication and customer service skills.

• Experience with energy-efficient and smart ACMV and HVAC systems.
• Familiarity with Building Management Systems (BMS).
• Knowledge of local HVAC codes and safety regulations.
• Welding and brazing skills.

• Work may involve travel to client sites or facilities.
• May require overtime, weekend, or on-call shifts.
• Work in varying environments, including hot or cold temperatures.
• Technical Skills

1. HVAC System Installation & Repair
   
   Installing air conditioning, refrigeration, and ventilation systems
   
   Diagnosing faults and carrying out repairs
2. Refrigeration Cycle Knowledge
   
   Understanding the thermodynamic cycle (evaporation, compression, condensation, expansion)
3. Electrical & Electronic Skills
   
   Wiring systems, reading circuit diagrams
   
   Knowledge of control systems and sensors
4. Mechanical Aptitude
   
   Understanding of compressors, condensers, evaporators, and fans
   
   Ability to use tools and machinery safely
5. System Design & Sizing
   
   Load calculations for appropriate system selection
   
   Ductwork and piping design
6. Refrigerant Handling
   
   Safe handling of refrigerants (e.g., R-410A, R-134a)
   
   Knowledge of recovery, recycling, and leak detection procedures
   
   EPA 608 certification (or equivalent depending on country)
7. Energy Efficiency & Environmental Compliance
   
   Knowledge of green technologies (like inverter systems, VRF/VRV systems)
   
   Awareness of climate regulations and refrigerant phase-outs (e.g., F-Gas regulations)
8. Computer & Software Proficiency
   
   Using diagnostic tools and software (e.g., BMS systems, HVAC design tools like AutoCAD, Revit MEP)

1. Blueprint Reading
   
   Interpreting technical drawings and schematics
2. Welding & Brazing
   
   Joining refrigerant piping and components
3. Preventive Maintenance
   
   Scheduling and executing regular maintenance
   
   Keeping detailed service records
4. Testing & Calibration
   
   Using gauges, multimeters, leak detectors, and pressure sensors

**Position Title:** Technician – Electrical & Plumbing

**Responsibilities:**

* Perform daily inspection, maintenance, and repair of electrical systems, plumbing, and related building facilities.

* Attend to tenant and management feedback regarding electrical and plumbing issues, ensuring timely resolution.

* Conduct preventive maintenance to ensure safe and efficient operation of all equipment.

* Assist with installation, modification, and reinstatement works when required.

* Respond promptly to emergencies such as power failures, leaks, or burst pipes, and carry out necessary corrective actions.

* Maintain accurate records of maintenance activities and submit reports as required.

* Monitor and coordinate works carried out by contractors to ensure compliance with safety and quality standards.

* Adhere to all Standard Operating Procedures (SOPs), workplace safety, and regulatory requirements.

**Requirements:**

* NITEC, Higher NITEC, or equivalent technical qualifications in Electrical or Plumbing.

* Minimum 2–3 years of relevant experience in electrical and plumbing maintenance (experience in commercial or residential properties is preferred).

* Good knowledge of troubleshooting techniques for electrical and plumbing systems.

* Ability to work independently and as part of a team.

* Willing to respond to emergency call-outs and perform overtime when required.

Roles & Responsibilities:

1. Installs, maintains, and repairs pipes and fixtures associated with water distribution and sanitation systems according to safety standards and building codes.

2. Inspects drainage and other plumbing systems for compliance with local regulations.

3. Inspects and conducts water tank maintenance work in compliance with PUB requirements.

4. Collaborates with contractors, other workers to ensure the smooth completion of work.

5. Leads and directs high-pressure construction projects, ensuring uncompromising quality and meeting stringent deadlines.

6. Adapts to sun exposure or hazardous environments.

7. Is hands-on and does not mind getting their hands dirty.

8. Must be able to work day or night shifts if required.

9. Must be able to work on weekends or public holidays if needed.

10. Exhibits unwavering flexibility, working extended hours, weekends, and frequently traveling between sites.

Requirements:

1. 5 years of hands-on experience with at least 3 years in relevant work.

2. Deep knowledge of plumbing and sanitary works.

3. Knowledge of cutting-edge equipment, safety protocols, and industry best practices.

4. Proven ability to thrive under extreme pressure and maintain composure in challenging situations.

Scope of works:

• Vacuum Tanker Service
• High-Pressure Water Jetting
• High Suction Vacuum Service (Grease Trap, Septic Tanks)
• Standard Chemical Portable Toilet
• Hoist Portable Toilet
• VIP Portable Toilet
• Plumbing service
• Changing of PVC and cast iron pipes
• Clearing choke of kitchen floor trap
• Clearing toilet choke
• Clearing choke of sink pipeline

**Position Title:** Technician – Electrical & Plumbing

**Responsibilities:**

* Perform daily inspection, maintenance, and repair of electrical systems, plumbing, and related building facilities.

* Attend to tenant and management feedback regarding electrical and plumbing issues, ensuring timely resolution.

* Conduct preventive maintenance to ensure safe and efficient operation of all equipment.

* Assist with installation, modification, and reinstatement works when required.

* Respond promptly to emergencies such as power failures, leaks, or burst pipes, and carry out necessary corrective actions.

* Maintain accurate records of maintenance activities and submit reports as required.

* Monitor and coordinate works carried out by contractors to ensure compliance with safety and quality standards.

* Adhere to all Standard Operating Procedures (SOPs), workplace safety, and regulatory requirements.

**Requirements:**

* NITEC, Higher NITEC, or equivalent technical qualifications in Electrical or Plumbing.

* Minimum 2–3 years of relevant experience in electrical and plumbing maintenance (experience in commercial or residential properties is preferred).

* Good knowledge of troubleshooting techniques for electrical and plumbing systems.

* Ability to work independently and as part of a team.

* Willing to respond to emergency call-outs and perform overtime when required.

The Project Lead is responsible for overseeing the planning, coordination, and execution of plumbing-related projects from inception to completion.

• Identify business opportunities and engage with new clients to support market development across various industries in Singapore.
• Develop proposals, presentations, and reports for internal stakeholders and external partners to ensure alignment with project goals and specifications.
• Maintain strong relationships with key stakeholders and business partners to foster long-term collaboration and drive business growth.
• Structure and coordinate strategic partnerships and joint initiatives to achieve organizational objectives.
• Review and manage large-scale commercial agreements to ensure compliance with regulatory standards.
• Oversee project execution, including on-site and factory-level activities, to ensure timely delivery and adherence to project specifications.
• Provide technical guidance on the application, performance, and upkeep of power-related systems and equipment.
• Apply knowledge of service operations tools and platforms to enhance project coordination and execution.
• Balance technical expertise with business acumen to prioritize tasks and deliver results across cross-functional teams.
• Develop project scope, cost estimates, timelines, and resource plans to inform project decisions.
• Coordinate with engineers, contractors, plumbing technicians, and site supervisors to ensure seamless project execution.
• Ensure compliance with plumbing codes, health & safety standards, and building regulations.
• Manage procurement and logistics of plumbing materials and subcontractor services.
• Monitor project progress and adjust timelines or resources as needed to maintain project momentum.
• Maintain accurate documentation, schedules, reports, and permits.
• Proactively resolve project issues, delays, or cost overruns.
• Conduct site visits and quality control checks to ensure project quality and adherence to specifications.

We are seeking a Purchaser to join our team. The ideal candidate will be responsible for sourcing and evaluating materials required for projects, comparing prices from multiple suppliers to ensure the best value, arranging material transportation and scheduling drivers for timely delivery, maintaining strong product knowledge of plumbing hardware and construction materials, and preparing purchase orders and thoroughly checking invoices and delivery orders for accuracy.

• Sourcing and evaluating materials required for projects
• Comparing prices from multiple suppliers to ensure the best value
• Arranging material transportation and scheduling drivers for timely delivery
• Maintaining strong product knowledge of plumbing hardware and construction materials
• Preparing purchase orders and thoroughly checking invoices and delivery orders for accuracy

• Minimum N level qualification
• At least 1 year of working experience in a related field
• Familiarity with Sanitary & Plumbing trade is an advantage

• A competitive salary package up to SGD 3200
• A performance bonus
• A permanent role

An efficient application process ensures that every resume is reviewed within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Job Summary:

The position of a Licensed Plumbing Specialist is open to highly skilled and experienced individuals who can oversee the installation and maintenance of plumbing systems, ensuring compliance with industry standards and regulations.

Key Responsibilities:

• Supervise the installation and maintenance of plumbing systems, adhering to technical specifications and safety protocols
• Collaborate with project managers, engineers, and other stakeholders to discuss progress and resolve any issues that may arise
• Inspect and test plumbing systems to ensure they are functioning properly and meet the required standards
• Develop and implement quality control procedures to prevent defects and ensure customer satisfaction
• Train and mentor junior staff members to enhance their skills and knowledge

Requirements:

• Possess a valid License Plumber License
• Minimum 8 years of experience in plumbing installation and maintenance
• Proficiency in Autocad drawing and submission of drawings to clients and stakeholders
• Excellent communication and problem-solving skills