18 Material Science jobs in Singapore

Responsibilities

· To lead a group of sputter EAs to conduct daily sputtering work

· To develop new multilayers thin film structure for new hard disk media programs

· To duplicate hard disk media structure based on design transferred

· To monitor sputter process

Requirements

· Bachelor/ Master’s Degree in Materials Science and Engineering (Chemistry/ Physics/ Mechanical/ Electronics)

· Candidates without experience are welcome to apply.

· Sputtering-related skills in PVD, CVD process, Minitab, Microsoft excel.

To find out more about this opportunity, please contact Lionel Liew at .

We regret that only shortlisted candidates will be notified.

GMP Technologies (S) Pte Ltd | EA Licence: 11C3793 | EA Personnel: Lionel Liew | Registration No: R

This is in partnership with the Employment and Employability Institute Pte Ltd (“e2i”).

e2i is the empowering network for workers and employers seeking employment and employability solutions. e2i serves as a bridge between workers and employers, connecting with workers to offer job security through job-matching, career guidance and skills upgrading services, and partnering employers to address their manpower needs through recruitment, training, and job redesign solutions. e2i is a tripartite initiative of the National Trades Union Congress set up to support nation-wide manpower and skills upgrading initiatives.

By applying for this role, you consent to GMP Technologies (S) Pte Ltd’s PDPA and e2i’s PDPA .

Overview
NTI-NTU Corporate Laboratory is a collaboration between Nanofilm Technologies International Limited (Nanofilm, NTI), Nanyang Technological University (NTU) and supported by Singapore under RIE2025. The Laboratory’s objective is to propel Innovation and Technologies commercialisation through NTU’s innovation and NTI’s deep technology. NTI-NTU Corporate Laboratory aligns with Singapore’s RIE2025 handbook, which emphasises the nation’s commitment to research and innovation to drive economic growth and address national challenges.
The Nanyang Technological University NTI-NTU Corporate Laboratory is seeking to hire a Research Fellow. The selected candidate will innovate hybridized composite materials and thin film coatings.
Responsibilities
Simulate, design, fabricate and characterize plasma process equipment.
Familiar with COMSOL software to simulate the influence of magnetic field on plasma flow.
Conduct diverse design simulations to refine processes.
Optimize vacuum coating processes, and lead R&D efforts in material science for application development.
Drive the development and implementation of coating techniques.
Oversee the transition from experimental designs to scalable solutions.
Prepare and deliver comprehensive reports to satisfy the stipulations of funding entities and corporate mandates.
Qualifications
Ph.D. in a relevant engineering or science discipline is required.
At least 2 years of combined specialized post-doctoral experience in industry or a recognized research institute.
Expertise in plasma physics, plasma source design, plasma control system design and a strong track record of research publications and patent filings are essential.
Applicants must demonstrate effective collaboration skills in multidisciplinary settings.
Hiring Institution
NTU
Seniority level
Mid-Senior level
Employment type
Full-time
Job function
Engineering and Information Technology
Industries
Higher Education
We regret that only shortlisted candidates will be notified.
#J-18808-Ljbffr

Overview
Research Fellow (Electrical and Electronic Engineering/Material Science/Physics) at Nanyang Technological University Singapore. The School of Electrical and Electronic Engineering is a founding school with a culture of excellence. It hosts over 3,000 undergraduate students and 2,000 graduate students and ranks 4th in Electrical & Electronic Engineering in the 2025 QS World University Rankings by Subjects. For details, view:
Responsibilities
Carbon Nanotubes growth, transfer and characterization
Waveguide/filters/lens device fabrication
High frequency characterization of fabricated passive devices
Work together with collaborators on waveguides design
Draft research papers for academic journals
Mentor new manpower (PhD or FYP students) if applicable
Prepare research proposals and conduct presentations at seminars
Support the school in various teaching activities, including supervising labs and tutorials
Qualifications
PhD degree in Electrical and Electronic Engineering and/or Electronic and Communication Engineering from top universities
Expertise in Carbon Nanotubes material
Experience with Carbon Nanotubes manipulation
Experience in cleanroom processes such as UV Lithography, E-Beam PVD, Sputtering, RIE, etc
At least 2 years research experience in related area
Good communication skills and the ability to work with team members and collaborators
Publication track record is an advantage
Meticulous and good with data
Self-Motivated and takes initiative
Independent and can work well with a team
Organized and detail oriented
Ability to adapt to changing priorities
Job Details
Seniority level: Mid-Senior level
Employment type: Full-time
Job function: Research, Analyst, and Information Technology
Industries: Higher Education
Hiring Institution: NTU
#J-18808-Ljbffr

The School of Chemistry, Chemical Engineering and Biotechnology is seeking for a full-time Research Fellow.
The Research Fellow will work together with R&D team to conduct the following tasks.
Key Responsibilities
Development of new machine learning modeling approaches
Development of new advanced control and optimization algorithms
Optimization of carbon capture process operation
Provide regular project updates to principal investigator and funding agency
Report writing/presentation
Job Requirements
PhD degree in an engineering field related to this project
Experience in dynamic modeling, machine learning and optimization & controls
Having basic knowledge in carbon capture, utilisation and storage (preferable)
Good command of English, both oral and written with ability to communicate effectively with a wide range of individual and professional groups
We regret that only shortlisted candidates will be notified.
Hiring Institution: NTU
#J-18808-Ljbffr

Research Fellow (Electrical and Electronic Engineering/Material Science/Physics) page is loaded# Research Fellow (Electrical and Electronic Engineering/Material Science/Physics)locations:
NTU Main Campus, Singaporetime type:
Full timeposted on:
Posted Todayjob requisition id:
R School of Electrical and Electronic Engineering is one of the founding Schools of the Nanyang Technological University. Built on a culture of excellence, the School is renowned for its high academic standards and research. With over 3,000 undergraduates students and 2,000 graduate students it is one of the largest EEE schools in the world and ranks 4th in the field of Electrical & Electronic Engineering in the 2025 QS World University Rankings by Subjects.Today, the School has become one of the world’s largest engineering schools that nurtures competent engineers and researchers. Each year, the School graduates over a thousand students who are ready to take on great ambitions and challenges.For more details, please view:We are looking for a Research Fellow (RF) who is experienced in device and microfabrication to support our research Novel Carbon Nanotube Transfer Technology. The role will be working together closely with our research team and our collaborators using the Carbon Nanotube transfer technology for the fabrication of high frequency passive devices.**Key Responsibilities:**The RF will work on a project to conduct the research on carbon-based passive devices for high frequency applications with our research team and our collaborators. The roles of this position include:* Carbon Nanotubes growth, transfer and characterization* Waveguide/filters/lens device fabrication* High frequency characterization of fabricated passive devices* Work together with collaborators on waveguides design* Draft research papers for academic journals* Mentor new manpower (PhD or FYP students) if there is any* Prepare research proposals and conduct presentations at seminars.* Support the school in various teaching activities, including instructing or supervision of labs and tutorials**Job Requirement:*** PhD degree in Electrical and Electronic Engineering and/or Electronic and Communication Engineering from top universities* Expertise in Carbon Nanotubes material* Experienced with Carbon Nanotubes manipulation* Experienced in cleanroom process such as UV Lithography, E-Beam PVD, Sputtering, RIE, etc* At least 2 years research experience in related area* Good communication skills and the ability to work with team members and collaborators* Publication track record is an advantage* Meticulous and good with data* Self-Motivated and takes initiative* Independent and can work well with a team* Organized and detail oriented* Ability to adapt to changing prioritiesWe regret to inform that only shortlisted candidates will be notified.Hiring Institution: NTUNTU is also home to world-class autonomous institutes – the National Institute of Education, S Rajaratnam School of International Studies, Earth Observatory of Singapore, and Singapore Centre for Environmental Life Sciences Engineering – and various leading research centres such as the Nanyang Environment & Water Research Institute (NEWRI) and Energy Research Institute @ NTU ( ).Ranked amongst the world’s top universities by QS, NTU has also been named the world’s top young university for the past seven years. The University’s main campus is frequently listed among the Top 15 most beautiful university campuses in the world and has 57 Green Mark-certified (equivalent to LEED-certified) buildings, of which 95% are certified Green Mark Platinum. Apart from its main campus, NTU also has a campus in Novena, Singapore’s healthcare district.Under the NTU Smart Campus vision, the University harnesses the power of digital technology and tech-enabled solutions to support better learning and living experiences, the discovery of new knowledge, and the sustainability of resources.For more information, visit
#J-18808-Ljbffr

Overview
Research Fellow (Materials Science/Engineering) at National University of Singapore
Responsibilities
Conducting literature reviews
Planning and implementing experiments
Writing progress reports
Other lab activities
Writing papers
Qualifications
PhD or doctorate in Materials Science, Polymer Chemistry, Biomedical Engineering, Chemical Engineering, Mechanical Engineering or related fields
Good attitude, self-motivated, good team player
Excellent command / highly proficient in spoken and written English
Experience with biodegradable or stimuli-responsive materials is highly desirable
More Information
Location: Kent Ridge Campus
Organization: College of Design and Engineering
Department: Mechanical Engineering
Employee Referral Eligible: No
Job requisition ID: 30267
Seniority level
Not Applicable
Employment type
Full-time
Job function
Research, Analyst, and Information Technology
Industries
Higher Education
Education Administration Programs
Strategic Management Services
#J-18808-Ljbffr

(Job ID: )
Responsibilities
Serve as the key link between customers, workshop teams, and testing departments, ensuring instructions are accurately translated into internal work instructions.
Manage test planning and internal communication to ensure smooth operations and high customer satisfaction.
Interpret and translate customer instructions into clear internal work instructions, aligning with quotations, specifications, and referenced standards.
Provide technical input to the Sales Administration Department for accurate scoping of quotations and work orders.
Liaise with customers to clarify test requirements, provide technical advice, and address queries on sample preparation, testing methods, and turnaround times.
Coordinate job scheduling between Workshop and Test Departments, ensuring timely prioritization and readiness of samples.
Support process improvements by reviewing SOPs and contributing to training and development initiatives for junior staff and workshop teams.
Perform any other ad hoc duties as assigned.
Requirements
Bachelor’s degree in Materials Science, Mechanical Engineering, or related field.
2–4 years of relevant laboratory experience under ISO/IEC 17025:2017.
Strong understanding of metallic materials, alloy specifications, and chemical compositions (steel, stainless steel, nickel, cobalt, aluminum, titanium).
Knowledge of welding processes, consumables, and material properties in industrial applications.
Strong technical foundation in materials engineering and analytical testing techniques.
Advantage:
Certifications such as CWI, CSWIP 3.1, or PCN Level 2 in Visual Inspection.
To apply, kindly send your updated resume to

We regret that only shortlisted candidates will be notified. However, all applications will be updated to our resume bank for future opportunities.
Please kindly refer to the Privacy Policy of Good Job Creations:
EA Licence No.: 07C5771
EA Personnel Reg. No.: R
EA Personnel Name: Edmund Ting Chao Siong
#SCR-edmund-ting
#J-18808-Ljbffr

(Job ID: )

Responsibilities:

• Serve as the key link between customers, workshop teams, and testing departments, ensuring instructions are accurately translated into internal work instructions.
• Manage test planning and internal communication to ensure smooth operations and high customer satisfaction.
• Interpret and translate customer instructions into clear internal work instructions, aligning with quotations, specifications, and referenced standards.
• Provide technical input to the Sales Administration Department for accurate scoping of quotations and work orders.
• Liaise with customers to clarify test requirements, provide technical advice, and address queries on sample preparation, testing methods, and turnaround times.
• Coordinate job scheduling between Workshop and Test Departments, ensuring timely prioritization and readiness of samples.
• Support process improvements by reviewing SOPs and contributing to training and development initiatives for junior staff and workshop teams.
• Perform any other ad hoc duties as assigned.

Requirements:

• Bachelor’s degree in Materials Science, Mechanical Engineering, or related field.
• 2–4 years of relevant laboratory experience under ISO/IEC 17025:2017.
• Strong understanding of metallic materials, alloy specifications, and chemical compositions (steel, stainless steel, nickel, cobalt, aluminum, titanium).
• Knowledge of welding processes, consumables, and material properties in industrial applications.
• Strong technical foundation in materials engineering and analytical testing techniques.
• Advantage: Certifications such as CWI, CSWIP 3.1, or PCN Level 2 in Visual Inspection.

To apply, kindly send your updated resume to

We regret that only shortlisted candidates will be notified. However, all applications will be updated to our resume bank for future opportunities.

Please kindly refer to the Privacy Policy of Good Job Creations:

EA Licence No.: 07C5771
EA Personnel Reg. No.: R
EA Personnel Name: Edmund Ting Chao Siong

#SCR-edmund-ting

(Job ID: )

Responsibilities:

• Serve as the key link between customers, workshop teams, and testing departments, ensuring instructions are accurately translated into internal work instructions.
• Manage test planning and internal communication to ensure smooth operations and high customer satisfaction.
• Interpret and translate customer instructions into clear internal work instructions, aligning with quotations, specifications, and referenced standards.
• Provide technical input to the Sales Administration Department for accurate scoping of quotations and work orders.
• Liaise with customers to clarify test requirements, provide technical advice, and address queries on sample preparation, testing methods, and turnaround times.
• Coordinate job scheduling between Workshop and Test Departments, ensuring timely prioritization and readiness of samples.
• Support process improvements by reviewing SOPs and contributing to training and development initiatives for junior staff and workshop teams.
• Perform any other ad hoc duties as assigned.

Requirements:

• Bachelor’s degree in Materials Science, Mechanical Engineering, or related field.
• 2–4 years of relevant laboratory experience under ISO/IEC 17025:2017.
• Strong understanding of metallic materials, alloy specifications, and chemical compositions (steel, stainless steel, nickel, cobalt, aluminum, titanium).
• Knowledge of welding processes, consumables, and material properties in industrial applications.
• Strong technical foundation in materials engineering and analytical testing techniques.
• Advantage: Certifications such as CWI, CSWIP 3.1, or PCN Level 2 in Visual Inspection.

To apply, kindly send your updated resume to

We regret that only shortlisted candidates will be notified. However, all applications will be updated to our resume bank for future opportunities.

Please kindly refer to the Privacy Policy of Good Job Creations:

EA Licence No.: 07C5771
EA Personnel Reg. No.: R
EA Personnel Name: Edmund Ting Chao Siong

#SCR-edmund-ting