146 Maintenance Services jobs in Singapore
Maintenance Services Representative Lead
Posted 6 days ago
Job Viewed
Job Description
**Maintenance Services Representative Lead - Auckland, New Zealand**
**Responsibilities**
**Panasonic Avionics Corporation (PAC)** is headquartered in California, with offices and regional centers in Dubai, Hong Kong, Singapore, Japan, Europe and UK; system production facilities in Osaka; as well as field service, maintenance and sales facilities worldwide.
**MAINTENANCE SERVICES REPRESENTATIVE LEAD - PERMANENT FULL-TIME**
**(AUCKLAND AIRPORT, NEW ZEALAND)**
Currently we have an opportunity for a qualified Maintenance Services Representative Lead (permanent full-time) to be based in our Auckland office. This is a rotating shiftwork position (including weekends), with average work hours of 40 hours per week, averaged over a year.
**The role:**
Supervises line station personnel and operations as assigned at the Line Stations. Line station operations are the performance of aircraft level maintenance & logistics but may include other duties as assigned.
Carry out all line maintenance activities and systems troubleshooting using basic computer and electronic theories as well as test equipment in accordance with regulations, policies and approved procedures.
Remove and replace components and equipment in accordance with regulations, policies and procedures.
Complete all administrative duties associated with maintenance actions performed.
Line Maintenance responsibilities may vary by location subject to contractual obligations.
**Aircraft Maintenance and Support:**
+ Lead team, perform and certify line maintenance, including IFE, in an efficient and effective manner during transit checks in accordance with contractual obligations or Panasonic Line Maintenance Procedures (LMP) and report the findings in an efficient and effective manner.
+ Maintenance tasks include component replacement, adjustments, inspections, functional tests and certification but are not limited to:
+ Troubleshoot aircraft systems to identify necessary repairs to restore full functionality, which may require the removal and replacement of defective line replaceable units (LRU)
+ Remove and replace LRUs in accordance with all approved applicable reference documentation.
+ Perform Cabin Sweep's in accordance with contractual obligations or Panasonic LMP's (Line Maintenance Procedures) and report findings.
+ Perform Built-in Test (BIT) and manual testing.
+ Assist with Software and Media Loading.
+ Clean components and equipment racks in accordance with contractual obligations.
+ Complete aircraft documentation in accordance with regulatory and contractual obligations.
+ Perform defect rectification on airframe, engine and systems in accordance with contractual obligations.
+ Ensure timely escalation and coordination with the Supervisor or Manager of any problem occurring in the assigned aircraft area.
+ Perform other reasonable related duties as assigned by Supervisor or Management
+ May be required to work on other aircraft equipment as trained and authorised.
+ Communicate and interface with the customer.
+ Certify for all work completed under a company issued or airline issued authority in accordance with governing regulations.
+ Coordinate between customer and Panasonic Avionics Corporation (PAC) divisions to monitor system performance against contractual level.
+ Actively promote the PAC Safety Management System (SMS) culture.
+ Perform and maintain high quality standards to ensure Panasonic and Airline Quality Assurance (QA) processes are followed.
**Administrative/Documentation:**
+ Accurate completion of Panasonic and airline required maintenance documentation, including electronic data entry and/or paper based systems within a timely manner to meet QA standards.
+ Lead station operations, optimising resources utilisation and expense.
+ Produce the shift roster to meet contractual obligations and operational requirements.
+ Ensures staff comply with PAC and customer procedures.
+ Ensure resources, including tools and test equipment, are available to maintain customer contractual obligations and compliance with regulatory requirements.
+ Execute and monitor inventory, cycle counting, packaging and shipping of inventory.
+ Maintain high standards of health and safety, housekeeping and tool care.
+ Perform other reasonable related duties as assigned by immediate Supervisor or Management.
**Knowledge / Skill Requirements:**
+ Ability to work in a team environment.
+ Ability to understand wiring diagrams and other technical documentation
+ Ability to follow standard practices and procedures in analysing situations and data from which answers can be obtained to rectify defects and restore system functionality.
+ Essential Aircraft maintenance experience includes but is not limited to:
+ Ability to determine if a LRU requires replacement.
+ Ability to determine if a unit is bad from stock or requires further troubleshooting.
+ Ability to use basic troubleshooting equipment and associated techniques.
+ Ability to carry out aircraft refueling, oil uplift, brake and wheel changes.
+ Ability to carry out airframe and engine visual check.
+ Ability to carry out defect rectification.
+ Ability to carry out aircraft push back
+ Excellent communication skills.
+ Ability to supervise and coach subordinates
+ Exhibit supervisory skill and ability to lead staff and coordinate shift activity
+ Ability to work in a high-stress, high-pressure environment.
+ Proficient in Word, Excel, Outlook (MS products).
+ Basic knowledge of Linux command line use.
+ Provide and receive appropriate instructions
+ Use professional concepts while applying company policies and procedures to resolve a variety of issues.
+ Excellent English language knowledge
**Education/Experience Requirements:**
+ Hold appropriate valid aircraft license / Authority required to certify customers different aircraft types/systems at assigned location
+ Minimum 5 years Aircraft maintenance experience including 3 years of exercising certification privilege.
+ IFE or related aircraft type experience is an advantage
+ 12 months experience on Panasonic IFEC or relevant aircraft systems.
+ Secondary/Technical School degree.
**Other Requirements:**
+ Must have the legal right to work in assigned country through nationality, visa or work permits.
+ Ability to pass extensive security and background checks.
+ May require both international and domestic travel, up to 25% of time, to other line station locations to provide relief from time to time as required.
+ Must hold a valid driver's license and be able to meet the requirements of the airport authority for access and vehicle operation on their premises.
+ Ability to work a rotating shift roster that spans 24 hours, 7 days a week, 365 days a year.
+ Manual dexterity and the ability to grasp and work with tool, parts and equipment.
+ Ability to:
+ Climb and work from ladder or platform and,
+ Sitting, standing, bending or twisting for extended periods and
+ To lift up to 50 pounds and
+ Operate under extreme weather conditions and in confined spaces for extended periods and
+ Ability to cope with environmental conditions which may include exposure to congestion and varying noise levels.
At **Panasonic Avionics New Zealand** we realise the most important aspects in leading our industry are the bright minds behind everything we do. We are proud to offer our employees a highly competitive, comprehensive, and flexible benefits program.
_Panasonic is proud to be an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, national origin, disability status, protected veteran status, and any other characteristic protected by law or company policy. All qualified individuals are required to perform the essential functions of the job with or without reasonable accommodation. Pre-employment drug testing is required for safety sensitive positions or as may otherwise be required by contract or law. Due to the high volume of responses, we will only be able to respond to candidates of interest. Thank you for your interest in the position._
REQ-
HEAD OF FINANCE | AVIATION & MAINTENANCE SERVICES
Posted today
Job Viewed
Job Description
HEAD OF FINANCE | AVIATION & MAINTENANCE SERVICES
Our client is a profitable and well-established large aviation and maintenance services group recognized for delivering high-quality service solutions while fostering strong partnerships with clients and employees.
The Head of Finance will lead a team of 10+ finance staff (onshore/offshore) reporting directly to the CEO. Responsibilities include leading financial planning, budgeting, forecasting, and analysis to support sustainable growth and profitability. The role also involves overseeing the preparation of accurate financial statements and consolidated reports in compliance with regulatory standards, managing cash flow forecasts and working capital, implementing robust financial controls and policies, ensuring tax and governance compliance, and leading a high-performing finance team. Additionally, the Head of Finance should spearhead finance transformation initiatives focused on digitalization and process improvements.
The ideal candidate should be a qualified accountant with over 10 years of progressive finance experience, including at least 5 years in a leadership role. Prior experience in the Big Four is advantageous. Candidates should possess strong communication skills, a collaborative mindset, and keen attention to detail. The work location is Ubi, Singapore.
Pan & Company Pte Ltd | Licence 18S9074 R
Seniority level
Mid-Senior level
Employment type
Full-time
Job function
Finance, Management, and Project Management
Industries
Facilities Services and Airlines and Aviation
#J-18808-Ljbffr
Equipment Maintenance Technician
Posted today
Job Viewed
Job Description
Job Summary:
The Maintenance Technician / Sr. Technician supports pharmaceutical manufacturing by performing scheduled Preventative maintenance and will be responsible for maintaining and troubleshooting equipment used in the production of tablets, ointments, and nasal sprays, ensuring smooth and compliant operations within a cGMP environment.
Key Responsibilities:
- Perform routine preventive maintenance and corrective repairs on manufacturing equipment including Granulation line, tablet compression machine, coating machines, ointment mixers, nasal spray filling machines, blister/tablet bulk packing lines and associated utilities (HVAC, compressed air, water systems).
- Troubleshoot mechanical, electrical, pneumatic, and control system faults promptly to minimize production downtime.
- Assist in installation, calibration, and qualification (IQ/OQ/PQ) of new or upgraded equipment according to cGMP and company SOPs.
- Maintain detailed maintenance logs, reports, and documentation ensuring compliance with regulatory and internal audit requirements.
- Support continuous improvement initiatives by identifying equipment reliability issues and proposing enhancements.
- Ensure adherence to safety standards, cleanroom protocols, and cGMP practices within manufacturing areas.
- Coordinate with production, quality assurance, and engineering teams for timely maintenance scheduling and equipment validation.
- Manage spare parts inventory and recommend procurement to avoid delays.
- Participate in emergency breakdown response, performing root cause analysis and implementing corrective actions.
- Maintain tools, instruments, and calibration devices, ensuring they are in proper working order and calibrated as required.
- Provide technical support during equipment inspections, audits, and regulatory visits.
Qualifications:
- Education: Diploma or Technical Certificate in Mechanical/Electrical Engineering or related field.
- Experience: 2–5 years of calibration experience in a regulated pharmaceutical, biotech, or GMP manufacturing environment. Troubleshooting experience on various instruments like pressure transmitters, temperature, relative humidity sensors etc. is must.
- Minimum 3 years of experience in pharmaceutical manufacturing maintenance, preferably with exposure to solid oral dosage, topical formulations, and nasal spray equipment.
- Experience with equipment qualification (IQ/OQ/PQ) and validation documentation.
- Familiarity with preventive maintenance programs and root cause failure analysis.
- Knowledge of safety standards.
- Training/certification in Good Manufacturing Practices (GMP) is preferred.
Certifications (preferred):
Training in USP <41>, <1251>, and <1058> practices
Skills:
Strong understanding of GMP, FDA 21 CFR Part 11, and data integrity principles.
- Working knowledge of risk/principal-based equipment / instrument classification.
- Excellent documentation and problem-solving skills.
Physical & Work Environment Requirements:
- Ability to work in cleanroom, lab, and utility areas following gowning and safety protocols.
- Able to lift up to 25 lbs and work on ladders, if needed.
- Occasional weekend or off-shift support may be required.
Equipment Maintenance Technician
Posted today
Job Viewed
Job Description
Job Summary:
The Maintenance Technician / Sr. Technician supports pharmaceutical manufacturing by performing scheduled Preventative maintenance and will be responsible for maintaining and troubleshooting equipment used in the production of tablets, ointments, and nasal sprays, ensuring smooth and compliant operations within a cGMP environment.
Key Responsibilities:
- Perform routine preventive maintenance and corrective repairs on manufacturing equipment including Granulation line, tablet compression machine, coating machines, ointment mixers, nasal spray filling machines, blister/tablet bulk packing lines and associated utilities (HVAC, compressed air, water systems).
- Troubleshoot mechanical, electrical, pneumatic, and control system faults promptly to minimize production downtime.
- Assist in installation, calibration, and qualification (IQ/OQ/PQ) of new or upgraded equipment according to cGMP and company SOPs.
- Maintain detailed maintenance logs, reports, and documentation ensuring compliance with regulatory and internal audit requirements.
- Support continuous improvement initiatives by identifying equipment reliability issues and proposing enhancements.
- Ensure adherence to safety standards, cleanroom protocols, and cGMP practices within manufacturing areas.
- Coordinate with production, quality assurance, and engineering teams for timely maintenance scheduling and equipment validation.
- Manage spare parts inventory and recommend procurement to avoid delays.
- Participate in emergency breakdown response, performing root cause analysis and implementing corrective actions.
- Maintain tools, instruments, and calibration devices, ensuring they are in proper working order and calibrated as required.
- Provide technical support during equipment inspections, audits, and regulatory visits.
Qualifications:
- Education: Diploma or Technical Certificate in Mechanical/Electrical Engineering or related field.
- Experience: 2–5 years of calibration experience in a regulated pharmaceutical, biotech, or GMP manufacturing environment. Troubleshooting experience on various instruments like pressure transmitters, temperature, relative humidity sensors etc. is must.
- Minimum 3 years of experience in pharmaceutical manufacturing maintenance, preferably with exposure to solid oral dosage, topical formulations, and nasal spray equipment.
- Experience with equipment qualification (IQ/OQ/PQ) and validation documentation.
- Familiarity with preventive maintenance programs and root cause failure analysis.
- Knowledge of safety standards.
- Training/certification in Good Manufacturing Practices (GMP) is preferred.
- Certifications (preferred):
Training in USP <41>, <1251>, and <1058> practices - Skills:
Strong understanding of GMP, FDA 21 CFR Part 11, and data integrity principles.
Working knowledge of risk/principal-based equipment / instrument classification.
Excellent documentation and problem-solving skills.
Physical & Work Environment Requirements:
- Ability to work in cleanroom, lab, and utility areas following gowning and safety protocols.
- Able to lift up to 25 lbs and work on ladders, if needed.
- Occasional weekend or off-shift support may be required.
Equipment Maintenance Professional
Posted today
Job Viewed
Job Description
We are seeking a skilled Maintenance Engineer to join our team. The ideal candidate will have a strong background in equipment maintenance and be able to develop and implement effective maintenance schedules.
The successful candidate will be responsible for maintaining and updating preventive maintenance specifications, calibrating equipment as needed, and performing troubleshooting and support engineering activities to resolve issues promptly.
They will also be responsible for managing spare parts and inventory levels effectively and driving improvement projects to enhance efficiency and productivity.
Equipment Maintenance Specialist
Posted today
Job Viewed
Job Description
Maintenance Technicians play a vital role in ensuring the seamless operation of equipment and facilities. They are responsible for performing routine maintenance tasks, conducting thorough inspections, and implementing corrective actions.
The ideal candidate will possess strong problem-solving skills, attention to detail, and excellent communication skills. A background in electronics or mechanical engineering is essential, with prior experience in maintenance or lift industry highly advantageous.
Key Responsibilities- Perform routine maintenance tasks to prevent equipment failures and ensure safety compliance.
- Conduct thorough inspections and analysis to identify potential issues and implement corrective actions.
- Keep accurate records of maintenance activities and provide detailed reports as required.
- Strong problem-solving skills and attention to detail.
- Excellent communication skills.
- Background in electronics or mechanical engineering.
- Prior experience in maintenance or lift industry (advantageous).
Equipment Maintenance Specialist
Posted today
Job Viewed
Job Description
Equipment Maintenance Specialist
We are seeking a skilled Equipment Maintenance Specialist to join our team. In this role, you will be responsible for troubleshooting, calibration, repair and maintenance of assigned Testers and Handlers platform.
- Troubleshoot and resolve technical issues with equipment to minimize downtime and ensure optimal performance.
- Perform routine maintenance tasks to prevent equipment failures and extend its lifespan.
- Collaborate with cross-functional teams to identify and implement process improvements.
Requirements
- Degree in Electronic, Electrical, Mechanical or Mechatronics Engineering or equivalent.
- Strong analytical and problem-solving skills with ability to work independently.
- Excellent communication and teamwork skills.
- Able to commit to either 12-hr permanent day/night shift.
Benefits
- Opportunity to work with state-of-the-art equipment and technology.
- Professional development opportunities to enhance your skills and knowledge.
- Competitive salary and benefits package.
Others
- Maintain accurate records of equipment maintenance activities.
- Participate in on-call rotation to ensure 24/7 support.
Be The First To Know
About the latest Maintenance services Jobs in Singapore !
Equipment Maintenance Specialist
Posted today
Job Viewed
Job Description
Job Description
We are seeking a highly skilled Equipment Maintenance Specialist to perform tasks in a fast-paced working environment. The role involves servicing and maintenance of equipment, installation of machinery, and collecting customer equipment performance indices.
Key Responsibilities:
- Performing preventative maintenance with customers
- Liaising directly with customers for their requirements
- Project coordination for installation and training
- Planning project deadlines and carrying out tasks accordingly
- Performing on-call and standby duty as required
- Identifying and resolving technical issues
Requirements:
- Degree in Electrical/Electronic Engineering or equivalent
- Class 3 driving licence preferred
- Experience in setting up and servicing of FPI Cleaning Line or high vacuum systems or heat treatment furnaces preferred
- Excellent problem-solving skills and hands-on individual competency in electronics, electrical systems, and mechanical systems
- Good communication skills
Benefits:
The ideal candidate will be independent, self-motivated, and have excellent communication and teamwork skills.
Equipment Maintenance Professionals
Posted today
Job Viewed
Job Description
Maintenance Technicians are responsible for performing routine maintenance tasks on equipment to ensure optimal performance and prevent breakdowns.
- Maintain, repair, and upgrade equipment as required
- Perform daily inspections to identify potential issues
- Develop and implement preventative maintenance plans to minimize downtime
- Collaborate with colleagues to resolve complex maintenance issues
- Carry out routine maintenance tasks according to schedule
- Perform corrective maintenance as required
- Identify and report safety hazards
- Participate in training programs to enhance skills and knowledge
- N Level / O Level in Engineering or relevant working experience
- Possession of a valid driving license
- Ability to work at heights
Equipment Maintenance Professional
Posted today
Job Viewed
Job Description
We are seeking a skilled Equipment Maintenance Professional to join our team. In this role, you will be responsible for ensuring the smooth operation of food production equipment by troubleshooting, repairing, and maintaining it.
Your duties will include executing emergency breakdown protocols, assisting in resolving downtime issues, cleaning equipment, and maintaining hygiene requirements. You will also collate and coordinate maintenance work, sometimes working with contractors, and comply with cleanliness and safety regulations while setting up and maintaining food manufacturing equipment.
- Troubleshoot and repair food production equipment
- Assist in resolving downtime issues
- Clean and maintain equipment hygiene requirements
- Collate and coordinate maintenance work
- Comply with cleanliness and safety regulations
- Minimum 1 year of experience in maintenance work and engineering field, preferably in food manufacturing
- 'O' level or NTC3 or NITEC in Mechanical Engineering
- Able to perform shift work and willing to learn new skills
- Positive work attitude