37 Maintaining Production Lines jobs in Singapore

Job Summary:

The Maintenance Technician / Sr. Technician supports pharmaceutical manufacturing by performing scheduled Preventative maintenance and will be responsible for maintaining and troubleshooting equipment used in the production of tablets, ointments, and nasal sprays, ensuring smooth and compliant operations within a cGMP environment.

Key Responsibilities:

• Perform routine preventive maintenance and corrective repairs on manufacturing equipment including Granulation line, tablet compression machine, coating machines, ointment mixers, nasal spray filling machines, blister/tablet bulk packing lines and associated utilities (HVAC, compressed air, water systems).
• Troubleshoot mechanical, electrical, pneumatic, and control system faults promptly to minimize production downtime.
• Assist in installation, calibration, and qualification (IQ/OQ/PQ) of new or upgraded equipment according to cGMP and company SOPs.
• Maintain detailed maintenance logs, reports, and documentation ensuring compliance with regulatory and internal audit requirements.
• Support continuous improvement initiatives by identifying equipment reliability issues and proposing enhancements.
• Ensure adherence to safety standards, cleanroom protocols, and cGMP practices within manufacturing areas.
• Coordinate with production, quality assurance, and engineering teams for timely maintenance scheduling and equipment validation.
• Manage spare parts inventory and recommend procurement to avoid delays.
• Participate in emergency breakdown response, performing root cause analysis and implementing corrective actions.
• Maintain tools, instruments, and calibration devices, ensuring they are in proper working order and calibrated as required.
• Provide technical support during equipment inspections, audits, and regulatory visits.

Qualifications:

• Education: Diploma or Technical Certificate in Mechanical/Electrical Engineering or related field.
• Experience: 2–5 years of calibration experience in a regulated pharmaceutical, biotech, or GMP manufacturing environment. Troubleshooting experience on various instruments like pressure transmitters, temperature, relative humidity sensors etc. is must.
• Minimum 3 years of experience in pharmaceutical manufacturing maintenance, preferably with exposure to solid oral dosage, topical formulations, and nasal spray equipment.
• Experience with equipment qualification (IQ/OQ/PQ) and validation documentation.
• Familiarity with preventive maintenance programs and root cause failure analysis.
• Knowledge of safety standards.
• Training/certification in Good Manufacturing Practices (GMP) is preferred.
• Certifications (preferred):
  
  Training in USP <41>, <1251>, and <1058> practices
• Skills:
  
  Strong understanding of GMP, FDA 21 CFR Part 11, and data integrity principles.

Working knowledge of risk/principal-based equipment / instrument classification.

Excellent documentation and problem-solving skills.

Physical & Work Environment Requirements:

• Ability to work in cleanroom, lab, and utility areas following gowning and safety protocols.
• Able to lift up to 25 lbs and work on ladders, if needed.
• Occasional weekend or off-shift support may be required.

ALG is seeking a skilled and proactive Maintenance Technician to join our client's Plant Facilities team. The role focuses on maintaining production equipment and plant facilities, ensuring smooth operations and optimal performance.

This is a 1 year contract role with high likelihood of extension or conversion to permanent.

• Maintain and implement a preventive maintenance program for all production equipment and plant facilities.
• Fabricate jigs and fixtures to support manufacturing processes.
• Address maintenance and repair requests from various departments.
• Log and track maintenance work orders, TPM downtime, compressor operation hours, hot work permits, and equipment checklists.
• Oversee daily start-up of production and facilities machinery.
• Ensure upkeep of facility services, including air conditioning, sprinkler systems, plumbing, power, and lighting.
• Perform scheduled Preventive Maintenance (PM) and Total Productive Maintenance (TPM).
• Conduct weekly Single Point Training sessions for production operators.

• Trade certificate, preferably in Electrical or Mechanical Engineering.
• Proficiency in computer skills, including MS Word, Excel, and PowerPoint.
• Relevant experience in machinery and equipment repair and maintenance.

If you're interested in this role, please APPLY NOW ! Do note that only shortlisted candidates will be notified.

EA License Number : 11C4379 | Registration Number: R

Job responsibilities

• Attend and address all electrical and mechanical problems related to plant equipment effectively and efficiently
• Carry out routine preventive and predictive maintenance activities with compliance to required standards
• Establish equipment normal operating parameters and perform preventive maintenance according to the schedule
• Perform calibration of transducers and signal transmitters according to standard operations
• Work with Engineering team for timely completion of modification/upgrading/set-up of machines
• Liaise with equipment vendors for technical matters and spare parts

Job Requirements

• Diploma / NITEC in Engineering (Electrical / Electronics) or equivalent
• Knowledge on troubleshooting Wire bond machine
• Strong technical knowledge is required in electrical circuits/ controls / pneumatic diagrams
• Able to use electrical measuring instruments and perform calibration
• Able to work independently with minimum supervision
• Able to perform shift duties

Job Summary:

The Maintenance Technician / Sr. Technician supports pharmaceutical manufacturing by performing scheduled Preventative maintenance and will be responsible for maintaining and troubleshooting equipment used in the production of tablets, ointments, and nasal sprays, ensuring smooth and compliant operations within a cGMP environment.

Key Responsibilities:

• Perform routine preventive maintenance and corrective repairs on manufacturing equipment including Granulation line, tablet compression machine, coating machines, ointment mixers, nasal spray filling machines, blister/tablet bulk packing lines and associated utilities (HVAC, compressed air, water systems).
• Troubleshoot mechanical, electrical, pneumatic, and control system faults promptly to minimize production downtime.
• Assist in installation, calibration, and qualification (IQ/OQ/PQ) of new or upgraded equipment according to cGMP and company SOPs.
• Maintain detailed maintenance logs, reports, and documentation ensuring compliance with regulatory and internal audit requirements.
• Support continuous improvement initiatives by identifying equipment reliability issues and proposing enhancements.
• Ensure adherence to safety standards, cleanroom protocols, and cGMP practices within manufacturing areas.
• Coordinate with production, quality assurance, and engineering teams for timely maintenance scheduling and equipment validation.
• Manage spare parts inventory and recommend procurement to avoid delays.
• Participate in emergency breakdown response, performing root cause analysis and implementing corrective actions.
• Maintain tools, instruments, and calibration devices, ensuring they are in proper working order and calibrated as required.
• Provide technical support during equipment inspections, audits, and regulatory visits.

Qualifications:

• Education: Diploma or Technical Certificate in Mechanical/Electrical Engineering or related field.
• Experience: 2–5 years of calibration experience in a regulated pharmaceutical, biotech, or GMP manufacturing environment. Troubleshooting experience on various instruments like pressure transmitters, temperature, relative humidity sensors etc. is must.
• Minimum 3 years of experience in pharmaceutical manufacturing maintenance, preferably with exposure to solid oral dosage, topical formulations, and nasal spray equipment.
• Experience with equipment qualification (IQ/OQ/PQ) and validation documentation.
• Familiarity with preventive maintenance programs and root cause failure analysis.
• Knowledge of safety standards.
• Training/certification in Good Manufacturing Practices (GMP) is preferred.
• Certifications (preferred):
  Training in USP <41>, <1251>, and <1058> practices
• Skills:
  Strong understanding of GMP, FDA 21 CFR Part 11, and data integrity principles.
  Working knowledge of risk/principal-based equipment / instrument classification.
  Excellent documentation and problem-solving skills.

Physical & Work Environment Requirements:

• Ability to work in cleanroom, lab, and utility areas following gowning and safety protocols.
• Able to lift up to 25 lbs and work on ladders, if needed.
• Occasional weekend or off-shift support may be required.

Job Summary:

The Maintenance Technician / Sr. Technician supports pharmaceutical manufacturing by performing scheduled Preventative maintenance and will be responsible for maintaining and troubleshooting equipment used in the production of tablets, ointments, and nasal sprays, ensuring smooth and compliant operations within a cGMP environment.

Key Responsibilities:

• Perform routine preventive maintenance and corrective repairs on manufacturing equipment including Granulation line, tablet compression machine, coating machines, ointment mixers, nasal spray filling machines, blister/tablet bulk packing lines and associated utilities (HVAC, compressed air, water systems).
• Troubleshoot mechanical, electrical, pneumatic, and control system faults promptly to minimize production downtime.
• Assist in installation, calibration, and qualification (IQ/OQ/PQ) of new or upgraded equipment according to cGMP and company SOPs.
• Maintain detailed maintenance logs, reports, and documentation ensuring compliance with regulatory and internal audit requirements.
• Support continuous improvement initiatives by identifying equipment reliability issues and proposing enhancements.
• Ensure adherence to safety standards, cleanroom protocols, and cGMP practices within manufacturing areas.
• Coordinate with production, quality assurance, and engineering teams for timely maintenance scheduling and equipment validation.
• Manage spare parts inventory and recommend procurement to avoid delays.
• Participate in emergency breakdown response, performing root cause analysis and implementing corrective actions.
• Maintain tools, instruments, and calibration devices, ensuring they are in proper working order and calibrated as required.
• Provide technical support during equipment inspections, audits, and regulatory visits.

Qualifications:

• Education: Diploma or Technical Certificate in Mechanical/Electrical Engineering or related field.
• Experience: 2–5 years of calibration experience in a regulated pharmaceutical, biotech, or GMP manufacturing environment. Troubleshooting experience on various instruments like pressure transmitters, temperature, relative humidity sensors etc. is must.
• Minimum 3 years of experience in pharmaceutical manufacturing maintenance, preferably with exposure to solid oral dosage, topical formulations, and nasal spray equipment.
• Experience with equipment qualification (IQ/OQ/PQ) and validation documentation.
• Familiarity with preventive maintenance programs and root cause failure analysis.
• Knowledge of safety standards.
• Training/certification in Good Manufacturing Practices (GMP) is preferred.
• Certifications (preferred):
  Training in USP <41>, <1251>, and <1058> practices
• Skills:
  Strong understanding of GMP, FDA 21 CFR Part 11, and data integrity principles.
  Working knowledge of risk/principal-based equipment / instrument classification.
  Excellent documentation and problem-solving skills.

Physical & Work Environment Requirements:

• Ability to work in cleanroom, lab, and utility areas following gowning and safety protocols.
• Able to lift up to 25 lbs and work on ladders, if needed.
• Occasional weekend or off-shift support may be required.

(Job ID: )

Responsibilities:

• Perform maintenance and replacement of equipment
• Terminate electrical cables at gantries.
• Troubleshoot and rectify equipment faults.
• Attend full training provided by the company.
• Perform any other tasks and duties as directed by supervisory personnel or Management.

Requirements:

• Nitec or Higher NITEC in Mechatronics, Electrical or Electronics
• Possess a Singapore Class 3 or 3A Driving License due to the need for site travelling.
• Minimum 2 years of technical experience.
• Willing to work at height in outdoor environments.
• Able to work on rotating shifts

To apply, kindly send your updated resume to 

We regret that only shortlisted candidates will be notified.

However, all applications will be updated to our resume bank for future opportunities.

Please kindly refer to the Privacy Policy of Good Job Creations for your reference:

EA Licence No.: 07C5771

EA Personnel Reg. No.: R

EA Personnel Name: Edmund Ting Chao Siong

Scope of Responsibilities

Execute the fixed equipment (tanks) out of service inspection and repair projects at the facility.

· Facilitate the preparation works with assigned maintenance project contractor including scope of work, MSRA, ITP。

· Implement process including Management of Change, Pre-start up Safety Review, Control of Work.

· Oversee contractors progress, performance and the quality of work performed by contractor.

· Liaise with API inspection for finding follow up.

· Maintain inspection records, tank summary sheets, and update maintenance plans.

Competency Requirements

· Bachler degree in engineering (Mechanical).

· Family with API 653 & 570 standard.

· years of experience in oil and gas industry.

· Terminal / lubricant plant experience is preferred.

Mitra Engineering Services is an industrial engineering business specializing in dust collection and air filtration systems, and we're expanding our team to support the next stage of growth. If you're ambitious, results-oriented and want a sales role where your success directly determines your rewards, this is the opportunity for you.

Roles & Responsibilities

We are a growing company looking for a technician to help maintain our dust collection machines. You will travel to customer sites, check the machines, and make sure they run safely. If you like hands-on work and solving problems, this role is for you.

Key Responsibilities:

• Install and repair machines
• Do regular checks and maintenance
• Fix simple mechanical and electrical problems
• Write short reports after each job
• Talk to customers and provide support
• Follow safety rules at all times

Working hours: Mon-Fri, 08:00 - 17:30 (OT Eligible)

Requirements

• ITE or equivalent level qualification in Mechanical/Electrical Engineering
• 2-3 years of experience working with industrial equipment
• Understanding of mechanical and electrical systems.
• Ability to read simple technical drawings.
• Problem-solving skills and good attitude
• Willing to travel to customer sites

Ensure the integrity, reliability, and safe operation of fixed equipment assets across the fuel storage terminal and lubricant blending plant.

Scope of Responsibilities:

Execute the fixed equipment (tanks) out of service inspection and repair projects at the facility.

• Facilitate the preparation works with assigned maintenance project contractor including scope of work, MSRA, ITP。

• Implement process including Management of Change, Pre-start up Safety Review, Control of Work.

• Oversee contractors progress, performance and the quality of work performed by contractor.

• Liaise with API inspection for finding follow up.

• Maintain inspection records, tank summary sheets, and update maintenance plans.

Competency Requirements:

• Bachler degree in engineering (Mechanical).

• Family with API 653 & 570 standard.

• 5 years of experience in oil and gas industry.

• Terminal / lubricant plant experience is preferred.