287 Inspection Technician jobs in Singapore

• Technician Exp
• No Exp Are Welcome To Apply & Training Will Be Provided
• Mon - Fri / Rotating Shifts

• Responsible for 50% Taping Operations and 50% Laser Operations or Laser Inspection
• Taping Operations
  Apply aluminum tape to aerospace component
  Remove and clean the component using abrasives and chemical
  Work with Laser Engineers and Quality Inspectors to process customer's part
  Assist in receiving, inspecting and shipping of newly received and finish processed parts
  Routine maintenance and troubleshooting of the equipment
  Control and perform preventive maintenance routines
  Manual loading and unloading of critical aerospace component
  Ensure all documentation is completed accurately and maintained in accordance with process control standards
  Read and interpret technical documentation, including work instructions, data cards, and KPIs
• Laser Operations
  Assist Laser Operators in running control strips according to data cards and interpreting the results
  Manually load and unload aerospace components into robotic processing stations
  Collaborate with Laser Operators and Technicians to process aerospace parts efficiently in a fast-paced environment
  Cross-check rectification points on rectification sheets with those programmed to prevent laser contact with exposed metal surfaces
  Support continuous improvement initiatives and maintain control parameters critical to the laser peening process
• In-Process Inspection
  Perform visual and dimensional inspections of aerospace components and verify processing parameters based on customer specifications
  Ensure timely deliveries by maintaining product conformity and service quality
  Communicate effectively with the production team and contribute to performance management processes
  Conduct periodic inspections and calibration of precision tools, ensuring accurate records are maintained
  Maintain current versions of customer specifications, drawings, and inspection records
  Ensure proper tagging and identification of processed components as agreed with the customer
  Actively participate in continuous improvement initiatives
  Perform hands-on inspections aligned with customer requirements and interpret associated documentation (drawings, specifications, data cards, etc.)
  Investigate quality concerns and implement corrective and preventive actions to resolve issues
  Promote a safe working environment and contribute to Environmental Health & Safety (EHS) initiatives in collaboration with the Quality Manager, Division Manager, and customers

• Possess a Diploma / Nitec in Engineering
• Possess some technical experience
• No experience are welcome to apply and training will be provided
• Good communications and interpersonal skills
• Able to work rotating shift (morning, noon & night shift)

• Mon - Fri (7am - 4:30pm / 4.30pm - 2am / 10pm - 7.30am) (Biweekly Rotation)
• Salary up to $2500 + $00 - 400/mth Shift Allowance + OT + AWS + VB
• Seletar Aerospace (Transport provided)

• Reason for leaving each past & current employment
• Salary drawn for each past & current employment
• Expected Salary
• Earliest availability date

• Technician Exp
• No Exp Are Welcome To Apply & Training Will Be Provided
• Mon – Fri / Rotating Shifts

Job Scope:

• Responsible for 50% Taping Operations and 50% Laser Operations or Laser Inspection
• Taping Operations
  Apply aluminum tape to aerospace component
  Remove and clean the components using abrasives and chemical
  Work with Laser Engineers and Quality Inspectors to process customer’s part
  Assist in receiving, inspecting and shipping of newly received and finish processed parts
  Routine maintenance and troubleshooting of the equipment
  Control and perform preventive maintenance routines
  Manual loading and unloading of critical aerospace component
  Ensure all documentation is completed accurately and maintained in accordance with process control standards
  Read and interpret technical documentation, including work instructions, data cards, and KPIs
• Laser Operations
  Assist Laser Operators in running control strips according to data cards and interpreting the results
  Manually load and unload aerospace components into robotic processing stations
  Collaborate with Laser Operators and Technicians to process aerospace parts efficiently in a fast-paced environment
  Cross-check rectification points on rectification sheets with those programmed to prevent laser contact with exposed metal surfaces
  Support continuous improvement initiatives and maintain control parameters critical to the laser peening process
• In-Process Inspection
  Perform visual and dimensional inspections of aerospace components and verify processing parameters based on customer specifications
  Ensure timely deliveries by maintaining product conformity and service quality
  Communicate effectively with the production team and contribute to performance management processes
  Conduct periodic inspections and calibration of precision tools, ensuring accurate records are maintained
  Maintain current versions of customer specifications, drawings, and inspection records
  Ensure proper tagging and identification of processed components as agreed with the customer
  Actively participate in continuous improvement initiatives
  Perform hands-on inspections aligned with customer requirements and interpret associated documentation (drawings, specifications, data cards, etc.)
  Investigate quality concerns and implement corrective and preventive actions to resolve issues
  Promote a safe working environment and contribute to Environmental Health & Safety (EHS) initiatives in collaboration with the Quality Manager, Division Manager, and customers

Requirements:

• Possess a Diploma / Nitec in Engineering
• Possess some technical experience
• No experience are welcome to apply and training will be provided
• Good communications and interpersonal skills
• Able to work rotating shift (morning, noon & night shift)

Other Information:

• Mon – Fri (7am - 4:30pm / 4.30pm - 2am / 10pm – 7.30am) (Biweekly Rotation)
• Salary up to $2500 + $00 - 400/mth Shift Allowance + OT + AWS + VB
• Seletar Aerospace (Transport provided)

To apply please click on the APPLY NOW button or email your resume to with the following details inside your resume for faster processing:

• Reason for leaving each past & current employment
• Salary drawn for each past & current employment
• Expected Salary
• Earliest availability date

We regret only shortlisted candidates will be notified. By submitting any application or résumé to us, you will be deemed to have agreed and consented to us collecting, using, retaining and disclosing your personal information to prospective employers for their consideration.

Yoong Poh Feng

EA License | 14C7092

EA Registration Number | R1105076

• Technician Exp
• No Exp Are Welcome To Apply & Training Will Be Provided
• Mon – Fri / Rotating Shifts

Job Scope:

• Responsible for 50% Taping Operations and 50% Laser Operations or Laser Inspection
• Taping Operations
  Apply aluminum tape to aerospace component
  Remove and clean the component using abrasives and chemical
  Work with Laser Engineers and Quality Inspectors to process customer’s part
  Assist in receiving, inspecting and shipping of newly received and finish processed parts
  Routine maintenance and troubleshooting of the equipment
  Control and perform preventive maintenance routines
  Manual loading and unloading of critical aerospace component
  Ensure all documentation is completed accurately and maintained in accordance with process control standards
  Read and interpret technical documentation, including work instructions, data cards, and KPIs
• Laser Operations
  Assist Laser Operators in running control strips according to data cards and interpreting the results
  Manually load and unload aerospace components into robotic processing stations
  Collaborate with Laser Operators and Technicians to process aerospace parts efficiently in a fast-paced environment
  Cross-check rectification points on rectification sheets with those programmed to prevent laser contact with exposed metal surfaces
  Support continuous improvement initiatives and maintain control parameters critical to the laser peening process
• In-Process Inspection
  Perform visual and dimensional inspections of aerospace components and verify processing parameters based on customer specifications
  Ensure timely deliveries by maintaining product conformity and service quality
  Communicate effectively with the production team and contribute to performance management processes
  Conduct periodic inspections and calibration of precision tools, ensuring accurate records are maintained
  Maintain current versions of customer specifications, drawings, and inspection records
  Ensure proper tagging and identification of processed components as agreed with the customer
  Actively participate in continuous improvement initiatives
  Perform hands-on inspections aligned with customer requirements and interpret associated documentation (drawings, specifications, data cards, etc.)
  Investigate quality concerns and implement corrective and preventive actions to resolve issues
  Promote a safe working environment and contribute to Environmental Health & Safety (EHS) initiatives in collaboration with the Quality Manager, Division Manager, and customers

Requirements:

• Possess a Diploma / Nitec in Engineering
• Possess some technical experience
• No experience are welcome to apply and training will be provided
• Good communications and interpersonal skills
• Able to work rotating shift (morning, noon & night shift)

Other Information:

• Mon – Fri (7am - 4:30pm / 4.30pm - 2am / 10pm – 7.30am) (Biweekly Rotation)
• Salary up to $2500 + $00 - 400/mth Shift Allowance + OT + AWS + VB
• Seletar Aerospace (Transport provided)

To apply please click on the APPLY NOW button or email your resume to with the following details inside your resume for faster processing:

• Reason for leaving each past & current employment
• Salary drawn for each past & current employment
• Expected Salary
• Earliest availability date

We regret only shortlisted candidates will be notified. By submitting any application or résumé to us, you will be deemed to have agreed and consented to us collecting, using, retaining and disclosing your personal information to prospective employers for their consideration.

Yoong Poh Feng

EA License | 14C7092

EA Registration Number | R1105076

Location: Kaki Bukit
Working Hours: Monday to Friday, 8:00am – 5:45pm
Salary: Up to $3,500 (Depending on Experience)

Key Responsibilities

• Perform annual inspection and servicing of lifts according to regulatory and safety standards
• Prepare inspection reports and ensure documentation is accurate and complete
• Identify and report safety or performance issues during inspection
• Liaise with clients, contractors, or relevant authorities when needed

Requirements

• Minimum 2 years of hands-on experience in annual lift inspections
• Familiar with lift safety standards and maintenance procedures
• Possess own transport
• Independent, responsible, and safety-conscious

To apply, please click on "Apply Now" or email your most recent resume to / Whatsapp 85017683.

Ho Tze Chin Kenny (R1762905)
Recruit Lync Pte Ltd (22C1000)

• Prepare and evaluate metallurgical samples; generate detailed reports.
• Inspect incoming materials for quality compliance.
• Maintain lab inventory and ensure proper housekeeping (6S).
• Assist with calibration and record management.

Requirements:

• Nitec in Precision Engineering, Aerospace Machining, or equivalent.
• At least 2 years’ experience in MRO QA or related lab environment.
• Proficient with measuring tools like callipers and micrometres.
• Basic understanding of GD&T drawings.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at

EA Licence: 19C9701

Registration: R1326740

Responsibilities:

• Prepare and evaluate metallurgical samples; generate detailed reports.
• Inspect incoming materials for quality compliance.
• Maintain lab inventory and ensure proper housekeeping (6S).
• Assist with calibration and record management.

Requirements:

• Nitec in Precision Engineering, Aerospace Machining, or equivalent.
• At least 2 years’ experience in MRO QA or related lab environment.
• Proficient with measuring tools like callipers and micrometres.
• Basic understanding of GD&T drawings.

Salary: $2,000 to $3,000

If you are keen to apply for the position, kindly email your detailed resume in MS Word to
Please note that only shortlisted candidates will be notified.

Ref: 0867321

EA Licence: 19C9701
Registration: R1326740

• Prepare and evaluate metallurgical samples; generate detailed reports.
• Inspect incoming materials for quality compliance.
• Maintain lab inventory and ensure proper housekeeping (6S).
• Assist with calibration and record management.

Requirements:

• Nitec in Precision Engineering, Aerospace Machining, or equivalent.
• At least 2 years’ experience in MRO QA or related lab environment.
• Proficient with measuring tools like callipers and micrometres.
• Basic understanding of GD&T drawings.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at

EA Licence: 19C9701

Registration: R1326740

#J-18808-Ljbffr

Responsibilities:

• Prepare and evaluate metallurgical samples; generate detailed reports.
• Inspect incoming materials for quality compliance.
• Maintain lab inventory and ensure proper housekeeping (6S).
• Assist with calibration and record management.

Requirements:

• Nitec in Precision Engineering, Aerospace Machining, or equivalent.
• At least 2 years’ experience in MRO QA or related lab environment.
• Proficient with measuring tools like callipers and micrometres.
• Basic understanding of GD&T drawings.

Salary: $2,000 to $3,000

If you are keen to apply for the position, kindly email your detailed resume in MS Word to
Please note that only shortlisted candidates will be notified.

Ref: 0867321

EA Licence: 19C9701
Registration: R1326740

• Prepare and evaluate metallurgical samples; generate detailed reports.
• Inspect incoming materials for quality compliance.
• Maintain lab inventory and ensure proper housekeeping (6S).
• Assist with calibration and record management.

Requirements:

• Nitec in Precision Engineering, Aerospace Machining, or equivalent.
• At least 2 years’ experience in MRO QA or related lab environment.
• Proficient with measuring tools like callipers and micrometres.
• Basic understanding of GD&T drawings.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at

EA Licence: 19C9701

Registration: R1326740