476 Heating jobs in Singapore

We are seeking a skilled and experienced Air-Conditioning and Refrigeration Engineer to install, maintain, and repair HVAC (Heating, Ventilation, Air Conditioning) and refrigeration systems. The ideal candidate will ensure optimal performance, energy efficiency, and compliance with safety and environmental standards.

• Install, inspect, service, and repair refrigeration and air conditioning systems.
• Diagnose mechanical and electrical faults in HVAC/R systems.
• Perform routine maintenance on commercial and residential cooling systems.
• Recharge systems with refrigerant and check for leaks.
• Read and interpret technical drawings, schematics, and manuals.
• Calibrate thermostats and ensure systems operate efficiently.
• Maintain records of repairs, maintenance schedules, and compliance checks.
• Comply with health and safety standards and regulations.
• Recommend system upgrades or replacements when needed.
• Work independently or as part of a team in various settings (residential, commercial, or industrial).

• Diploma or Certificate in Refrigeration and Air Conditioning Engineering or equivalent.
• Proven experience as an HVAC/R technician or engineer.
• Knowledge of refrigeration cycles, electrical systems, and control systems.
• EPA or equivalent certification for handling refrigerants (if applicable).
• Strong problem-solving skills and attention to detail.
• Ability to work in confined spaces or at heights, as required.
• Valid driver's license (if fieldwork is involved).
• Good communication and customer service skills.

• Experience with energy-efficient and smart ACMV and HVAC systems.
• Familiarity with Building Management Systems (BMS).
• Knowledge of local HVAC codes and safety regulations.
• Welding and brazing skills.

• Work may involve travel to client sites or facilities.
• May require overtime, weekend, or on-call shifts.
• Work in varying environments, including hot or cold temperatures.
• Technical Skills

1. HVAC System Installation & Repair
   
   Installing air conditioning, refrigeration, and ventilation systems
   
   Diagnosing faults and carrying out repairs
2. Refrigeration Cycle Knowledge
   
   Understanding the thermodynamic cycle (evaporation, compression, condensation, expansion)
3. Electrical & Electronic Skills
   
   Wiring systems, reading circuit diagrams
   
   Knowledge of control systems and sensors
4. Mechanical Aptitude
   
   Understanding of compressors, condensers, evaporators, and fans
   
   Ability to use tools and machinery safely
5. System Design & Sizing
   
   Load calculations for appropriate system selection
   
   Ductwork and piping design
6. Refrigerant Handling
   
   Safe handling of refrigerants (e.g., R-410A, R-134a)
   
   Knowledge of recovery, recycling, and leak detection procedures
   
   EPA 608 certification (or equivalent depending on country)
7. Energy Efficiency & Environmental Compliance
   
   Knowledge of green technologies (like inverter systems, VRF/VRV systems)
   
   Awareness of climate regulations and refrigerant phase-outs (e.g., F-Gas regulations)
8. Computer & Software Proficiency
   
   Using diagnostic tools and software (e.g., BMS systems, HVAC design tools like AutoCAD, Revit MEP)

1. Blueprint Reading
   
   Interpreting technical drawings and schematics
2. Welding & Brazing
   
   Joining refrigerant piping and components
3. Preventive Maintenance
   
   Scheduling and executing regular maintenance
   
   Keeping detailed service records
4. Testing & Calibration
   
   Using gauges, multimeters, leak detectors, and pressure sensors

We are seeking a skilled Tank Heating Specialist to join our Operations team.

The successful candidate will be responsible for operating boilers in our depot, ensuring maintenance programs are followed, and providing technical expertise to optimize operations efficiency.

• Operate boiler systems : Manage boiler water chemical dosage, pre-test boiler water, and perform steam heating according to requirements.
• Maintain boiler equipment : Liaise with contractors for servicing and repairs, ensuring compliance with industry standards.
• Ensure operational safety : Monitor boiler performance, temperature readings, and sample recording to prevent dark smoke emissions and chemical leaks.
• Support tank preparation : Assist in preparing tanks for cleaning and maintenance tasks.

• GCE 'O' Levels
• Class 1/2 Boiler Attendant certificate of competency
• At least 1-2 years of experience in related field

• Operate the boilers in the depot which include chemical dosage, pre-test of the boiler water and water softener dosage / treatment.
• Ensure boiler maintenance program is followed; liaise with contractors on servicing and repairs of the boiler and related equipment and accessories include returned lines, steam hoses / connections, steam returned lines, steam pressure control valves, water tank, etc and liaise with the Ministry of Labour Factory Inspectorate during annual inspection and feedback to the Operations Manager for action.
• Carry out steam heating in accordance to requirement with proper temperature reading and recording Samples to be collected and labeled. Both laden tanks and samples to be delivered timely and ensure to observe all safety precautions at work and meet OHSE management requirement.
• Observe no dark smoke emitted from the chimney and no chemical / oil / diesel leakage from drums, diesel storage tank or forklift truck.
• Assist to prepare tanks for cleaning.

• GCE 'O' Levels
• Required to have Class 2 Boiler Attendant certificate of competency. For Lead position, Class 1 Boiler Attendant certificate of competency is required.
• At least 1 to 2 years of working experience in the related field

• A full-time and permanent role
• Working Hours: Monday-Friday:
• First shift: 12.00am to 9.00am
• Second shift: 7.30am to 4.30pm
• Third shift: 3.00pm to 12.00am
• 5 days' work week with rest day on Sundays
• A competitive compensation package, including a 13th month
• Good Flexible Medical Benefits for you and your family members

• Complete the online application form and send it to us along with your CV
• Short-listed candidate, will be invited to attend interview at our depot

Are you as excited as we are when we talk about the storage and distribution of bulk liquids at our state-of-the-art tank containers and terminals located in key markets? Could this be the scene for your next career move? We are currently recruiting for a Lead / Tank Heating Technician to join our Operations team.

Stolt Tank Containers (STC) is a leading provider of door-to-door transportation services for bulk- liquid chemicals and food-grade products. With a fleet of more than 45,000 tank containers, STC is the only operator with its own worldwide network of 22 owned and joint venture depots. Our culture champions digitalization, collaboration and continuous improvement, as well as a commitment to a sustainable future.

You will be joining a professional and international team with extensive knowledge of the industry. As part of our Operations team, you will provide your technical expertise and synergize effort for operations efficiency. Your expertise ensures that we will continue to set the industry benchmark for seamless and efficient operations.

Key Responsibilities

• Operate the boilers in the depot which include chemical dosage, pre-test of the boiler water and water softener dosage / treatment.
• Ensure boiler maintenance program is followed; liaise with contractors on servicing and repairs of the boiler and related equipment and accessories include returned lines, steam hoses / connections, steam returned lines, steam pressure control valves, water tank, etc and liaise with the Ministry of Labour Factory Inspectorate during annual inspection and feedback to the Operations Manager for action.
• Carry out steam heating in accordance to requirement with proper temperature reading and recording Samples to be collected and labeled. Both laden tanks and samples to be delivered timely and ensure to observe all safety precautions at work and meet OHSE management requirement.
• Observe no dark smoke emitted from the chimney and no chemical / oil / diesel leakage from drums, diesel storage tank or forklift truck.
• Assist to prepare tanks for cleaning.

Qualifications

• GCE 'O' Levels
• Required to have Class 2 Boiler Attendant certificate of competency. For Lead position, Class 1 Boiler Attendant certificate of competency is required.
• At least 1 to 2 years of working experience in the related field

What we offer

Join us and become part of a family-founded organization where your contribution counts.

• A full-time and permanent role
• Working Hours: Monday-Friday:
• First shift: 12.00am to 9.00am
• Second shift: 7.30am to 4.30pm
• Third shift: 3.00pm to 12.00am
• 5 days’ work week with rest day on Sundays
• A competitive compensation package, including a 13th month
• Good Flexible Medical Benefits for you and your family members

How to apply

• Complete the online application form and send it to us along with your CV
• Short-listed candidate, will be invited to attend interview at our depot

Got questions about the process? Contact .

About Stolt-Nielsen

Stolt Tankers is a division of Stolt-Nielsen Limited (SNL), focused on opportunities in logistics, distribution, and aquaculture. The Stolt-Nielsen portfolio consists of its three global bulk liquid and chemicals logistics businesses: Stolt Tankers, Stolthaven Terminals and Stolt Tank Containers – Stolt Sea Farm and investments in LNG. Stolt-Nielsen Limited is listed on the Oslo Stock Exchange (Oslo Børs: SNI). Our values: We act pragmatically, collaborate for success, commit to go further, and seek creative solutions.

Disclaimer for recruitment agencies

We don’t accept any unsolicited applications or CVs from recruitment and selection agencies.

We are seeking a highly skilled HVAC specialist to join our team. The ideal candidate will have a strong background in installing, maintaining and repairing ventilation and air conditioning systems and equipment.

• Installation, maintenance and repair of heating, ventilation and air conditioning systems and equipment.
• Identification of potential maintenance risks on equipment.
• Diagnostic analysis of electrical and mechanical faults in HVAC systems.
• Cleaning, adjustment and repair of systems, including warranty services.
• Prompt and efficient emergency repairs.
• Provision of technical direction and on-the-job training.
• Maintenance of daily logs and records of all maintenance functions.
• Ensuring compliance with appliance standards and Occupational Health and Safety regulations.
• Compliance with service standards, work instructions and customer requirements.
• Assistance with customer queries.

A strong understanding of safety protocols and procedures is essential for this role. The successful candidate will be able to work efficiently and effectively in a fast-paced environment while providing excellent customer service.

The successful candidate will also have the opportunity to work with a variety of HVAC systems and equipment, including installation, maintenance and repair of commercial and residential units.

We offer competitive compensation packages, comprehensive benefits, and opportunities for professional growth and development.

Our company is committed to providing a safe and healthy work environment, and we take pride in our commitment to excellence in everything we do.

We are seeking a skilled and experienced Air-Conditioning and Refrigeration Engineer to install, maintain, and repair HVAC (Heating, Ventilation, Air Conditioning) and refrigeration systems. The ideal candidate will ensure optimal performance, energy efficiency, and compliance with safety and environmental standards.

• Install, inspect, service, and repair refrigeration and air conditioning systems.
• Diagnose mechanical and electrical faults in HVAC/R systems.
• Perform routine maintenance on commercial and residential cooling systems.
• Recharge systems with refrigerant and check for leaks.
• Read and interpret technical drawings, schematics, and manuals.
• Calibrate thermostats and ensure systems operate efficiently.
• Maintain records of repairs, maintenance schedules, and compliance checks.
• Comply with health and safety standards and regulations.
• Recommend system upgrades or replacements when needed.
• Work independently or as part of a team in various settings (residential, commercial, or industrial).

• Diploma or Certificate in Refrigeration and Air Conditioning Engineering or equivalent.
• Proven experience as an HVAC/R technician or engineer.
• Knowledge of refrigeration cycles, electrical systems, and control systems.
• EPA or equivalent certification for handling refrigerants (if applicable).
• Strong problem-solving skills and attention to detail.
• Ability to work in confined spaces or at heights, as required.
• Valid driver’s license (if fieldwork is involved).
• Good communication and customer service skills.

• Experience with energy-efficient and smart ACMV and HVAC systems.
• Familiarity with Building Management Systems (BMS).
• Knowledge of local HVAC codes and safety regulations.
• Welding and brazing skills.

• Work may involve travel to client sites or facilities.
• May require overtime, weekend, or on-call shifts.
• Work in varying environments, including hot or cold temperatures.
• Technical Skills

1. HVAC System Installation & Repair
   Installing air conditioning, refrigeration, and ventilation systems
   Diagnosing faults and carrying out repairs
2. Refrigeration Cycle Knowledge
   Understanding the thermodynamic cycle (evaporation, compression, condensation, expansion)
3. Electrical & Electronic Skills
   Wiring systems, reading circuit diagrams
   Knowledge of control systems and sensors
4. Mechanical Aptitude
   Understanding of compressors, condensers, evaporators, and fans
   Ability to use tools and machinery safely
5. System Design & Sizing
   Load calculations for appropriate system selection
   Ductwork and piping design
6. Refrigerant Handling
   Safe handling of refrigerants (e.g., R-410A, R-134a)
   Knowledge of recovery, recycling, and leak detection procedures
   EPA 608 certification (or equivalent depending on country)
7. Energy Efficiency & Environmental Compliance
   Knowledge of green technologies (like inverter systems, VRF/VRV systems)
   Awareness of climate regulations and refrigerant phase-outs (e.g., F-Gas regulations)
8. Computer & Software Proficiency
   Using diagnostic tools and software (e.g., BMS systems, HVAC design tools like AutoCAD, Revit MEP)

1. Blueprint Reading
   Interpreting technical drawings and schematics
2. Welding & Brazing
   Joining refrigerant piping and components
3. Preventive Maintenance
   Scheduling and executing regular maintenance
   Keeping detailed service records
4. Testing & Calibration
   Using gauges, multimeters, leak detectors, and pressure sensors

• Technical Expertise: Proficient in reading and interpreting technical drawings, blueprints, and manuals.
• Installation: Skilled in assembling and installing industrial machinery and equipment according to specifications.
• Troubleshooting: Strong problem-solving skills to diagnose and fix issues efficiently.
• Basic Electrical Knowledge: Understanding wiring, voltage, and safety protocols
• Tool Proficiency: Comfortable using hand tools, drills, multimeters, and cable testers
• System Setup: Ability to follow schematics and install devices like sensors, panels, or laser heads
• Mechanical Aptitude: Assembling mounts, brackets, and enclosures with precision
• Computer Literacy: Navigating installation software, firmware updates, and basic configuration

• Engineering related field of study.
• Singaporean/Permanent resident

As an Electrical Installation Technician, you will be responsible for the preparation and installation of electrical wiring and cabling in junction boxes/panels. This role requires a high level of technical expertise and attention to detail.

• Preparation and installation of electrical wiring and cabling in junction boxes/panels.
• Maintenance and repair of electrical systems.
• Mounting and fixing electrical components such as meters, gateways, and junction boxes on site.
• Knowledge of basic conduit, trunking, cable tray, and cable laying works.
• Use of basic hand tools such as screwdrivers, pliers, cutters, etc. safely and effectively.

• Diploma in Electrical Engineering or similar field.
• At least 2 years of experience in electrical installation.
• Bilingual in English and Mandarin to converse with Mandarin speaking associates.

5.5 Days: Monday - Friday 8am – 5pm & Saturday 8am – 12pm

As our business expands, we’re seeking a skilled installation technician to join us. The ideal candidate will bring hands-on technical expertise. Responsibilities include system setup, troubleshooting primarily involving precision laser technologies. Strong communication and problem-solving skills are essential, along with the flexibility to adapt in fast-paced environments.

Key skills

• Technical Expertise: Proficient in reading and interpreting technical drawings, blueprints, and manuals.
• Installation: Skilled in assembling and installing industrial machinery and equipment according to specifications.
• Troubleshooting: Strong problem-solving skills to diagnose and fix issues efficiently.
• Basic Electrical Knowledge : Understanding wiring, voltage, and safety protocols
• Tool Proficiency : Comfortable using hand tools, drills, multimeters, and cable testers
• System Setup : Ability to follow schematics and install devices like sensors, panels, or laser heads
• Mechanical Aptitude : Assembling mounts, brackets, and enclosures with precision
• Computer Literacy : Navigating installation software, firmware updates, and basic configuration
  

Requirements:

• Engineering related field of study.
• Singaporean/Permanent resident