957 Full Time Installer jobs in Singapore

• Interpret and work from blueprints, technical drawings, and verbal instructions.
• Measure, cut, and shape wood, plywood, drywall, and other materials accurately.
• Construct frameworks, formwork, scaffolding, partitions, and other wooden structures.
• Install doors, windows, flooring, cabinets, and other fixtures as required.
• Inspect and repair damaged frameworks or other structural elements.
• Ensure all carpentry work complies with safety regulations and site requirements.
• Maintain tools and equipment in good working condition.
• Coordinate with other construction professionals and tradespeople on-site.

• Minimum 2–3 years of experience in construction carpentry.
• Proficiency with carpentry tools and machinery (e.g., saws, drills, levels, nail guns).
• Familiarity with various types of wood and building materials.
• Ability to read and interpret blueprints and site layouts.
• Physically fit with good stamina and strength for manual tasks.
• Strong attention to detail and commitment to safety practices.
• Must intention to hard work physically.
• Need to work long hours
• Maximum works under sun.

Job Responsibilities:

• Perform the necessary accessories installation on new cars before delivery.
• Ensure all accessories are duly installed.
• Ensure timely job completion.
• Other duties as assigned by the Superior.

Job Requirements:

• Preferably candidates with relevant work experience in the Automotive industry.
• Possesses a valid class 3 driving license.

Join Our Team and Enjoy These Amazing Benefits

• AWS
• Yearly performance bonus
• Dental coverage
• Comprehensive medical insurance
• Annual Health Screening
• Birthday Leave

Working hours:

Mondays to Fridays: 08:30 am to 5:30 pm, Every Saturday: 08:30 am to 12:30 pm

Working location: 6A Mandai Estate, Singapore 729903.

By submitting your resume/application, it is deemed that you have acknowledged and give consent to the collection, use and disclosure of your personal data as provided in your application by the Company, for the purposes of verification, evaluation and other recruitment-related procedures in accordance with the Personal Data Protection Act.

Thank you for your submission, and we regret that only the shortlisted candidate will be notified.

• Perform Electrical Works including wiring and assembly work
• Set up and install Surveillance equipment and systems
• Maintain and perform troubleshooting for Surveillance equipment and systems
• Any ad-hoc duties as assigned

Requirements

• Min. Diploma in Electrical/Electronic Engineering
• Min. 2 years relevant experience
• Preferable with Class 3 driving license
• Ability to work independently and as a team-player
• Able to perform shift work and work on weekends and public holidays

• Prepare surfaces by cleaning, sanding, filling cracks, and applying primers.
• Mix and apply paints, varnishes, sealants, and protective coatings using brushes, rollers, or spray guns.
• Perform touch-ups, retouching, and repair works as required.
• Protect non-paintable areas with masking tape, drop cloths, or protective coverings.
• Ensure proper color matching and smooth finishing.
• Maintain painting tools, spray guns, and equipment in good working condition.
• Follow safety procedures, especially when working at heights, with chemicals, or in confined spaces.
• Coordinate with other trades and site workers to meet project deadlines.

• Minimum 2–3 years of experience as a Painter in construction or industrial projects.
• Familiar with different types of paints, coatings, and surface preparation methods.
• Physically fit and able to work at heights, on scaffolding, or outdoors.
• Knowledge of paint mixing, matching, and finishing techniques.
• Good eye for detail and quality workmanship.
• working long hours.
• Must working under sun power.

• Read and interpret engineering drawings, blueprints, and welding symbols.
• Select appropriate welding equipment, tools, and materials for the job.
• Perform various welding processes (e.g., SMAW, MIG, TIG, FCAW, gas welding) on steel, stainless steel, or other metals.
• Prepare metal surfaces by cleaning, grinding, or cutting before welding.
• Inspect completed welds to ensure they meet quality and safety standards.
• Repair damaged or worn metal parts and structures.
• Operate cutting, bending, and shaping equipment when required.
• Follow workplace safety procedures and wear appropriate PPE.

• Minimum 3 years of welding experience in construction, manufacturing, or shipbuilding.
• Skilled in one or more welding methods (SMAW, MIG, TIG, etc.).
• Ability to read and understand technical drawings.
• Physically fit and comfortable working in various site conditions (including heights or confined spaces).
• Strong attention to detail and commitment to producing high-quality work.
• Need to work under sun.
• Need to work OT, if need.

• Prepare exterior surfaces (walls, ceilings, facades) by scraping, sanding, power washing, or chemical cleaning.
• Apply primer, paint, waterproofing, or other finishes using brushes, rollers, or spray guns.
• Perform patching or minor surface repairs before painting.
• Mix and match paint colors to ensure consistency and desired finish.
• Set up scaffolding, ladders, or swing stages safely to reach high areas.
• Protect non-paintable surfaces with masking tape, coverings, or drop cloths.
• Inspect painted surfaces for uniformity and correct flaws as needed.
• Work in compliance with site safety standards and PPE requirements.

• Minimum 2–3 years of experience in exterior or industrial painting.
• Familiar with different types of outdoor paints, waterproofing materials, and weather-resistant coatings.
• Physically fit, comfortable with working at heights or on scaffolding.
• Good knowledge of painting tools and techniques.
• Attention to detail and ability to meet finishing quality standards.
• Basic understanding of workplace safety procedures.
• Need to work long hours and under sun acceptance

Read and interpret blueprints, drawings, and technical plans.

Measure, cut, shape, and assemble wood and other materials according to design specifications.

Install structures, furniture, and fittings such as doors, windows, cabinets, and flooring.

Repair and maintain wooden structures, fixtures, and fittings.

Select and prepare the right tools, materials, and equipment for each job.

Ensure all work is completed safely and complies with relevant codes and standards.

Collaborate with other tradespeople, contractors, and supervisors to ensure project completion.

Maintain tools and equipment in good working condition.

Requirements:-

Proven experience as a Carpenter or in a similar role.

Proficient in using woodworking machinery, hand tools, and power tools.

Knowledge of carpentry techniques, materials, and safety procedures.

Ability to read and interpret technical documents and drawings.

Strong attention to detail and craftsmanship skills.

Physical stamina and manual dexterity.

Relevant certifications or training in carpentry will be an advantage.

Need to do long hours, and under sun.

• To report for Tool Box Meeting at 6am everyday.
• Able to work under harsh and dusty enviornment.
• Be able to work on Gondola.
• Be able to perform and work under strict supervision and follow guidlines.
• To be accountable for all materials at site and keep track of all the site items.
• To be able to make purchases for the site related material as and when needed with minimal supervision and instructions.
• Ensure all authority-related requirements are followed during the execution of work and liaise with authorities if required.
• Able to work in odd hours as and when required.
• Be able to work independently and a fast learner.
• Be able to perform all site related works as and when requested by the site supervisor.
• Any other ad-hoc duties.

• Read and interpret blueprints, technical drawings, and welding process specifications.
• Operate welding equipment (MIG, TIG, Stick, Arc, etc.) safely and efficiently.
• Fabricate and assemble metal components according to project requirements.
• Inspect completed welds for quality and compliance with specifications.
• Perform welding repairs and maintenance on machinery, structures, and equipment.
• Ensure proper handling, storage, and maintenance of tools and equipment.
• Follow all workplace safety standards and maintain a clean, safe work environment.
• Collaborate with team members and supervisors to complete projects on time.

• Minimum (X) years of welding experience (depending on job level).
• Certification in welding (e.g., AWS, ASME, or equivalent) preferred.
• Strong knowledge of various welding techniques, materials, and tools.
• Ability to read and interpret engineering drawings and technical specifications.
• Good hand-eye coordination, attention to detail, and physical stamina.
• Familiarity with safety standards and regulations in welding and fabrication.

• Work may involve exposure to heat, sparks, noise, and confined spaces.
• May require use of personal protective equipment (PPE) such as gloves, helmet, safety glasses, and protective clothing.
• Overtime or weekend work may be required depending on project deadlines.
• Maximum job site under sun.