195 Engineering Graduate jobs in Singapore

Join to apply for the Engineering Graduate Trainee (Mechanical) role at K2 STRATEGIC .

Get AI-powered advice on this job and more exclusive features.

Due to K2 expansion, the APAC technical and delivery team is looking to hire an Engineering Trainee to support our internal design team management and design review work. This person will work closely with the SG HQ-based Project Management team to handle daily design-related issues for existing and future projects in the APAC region.

• Assist Project Manager / Design Manager / Site Delivery Manager in data centre design and construction phases for site management and construction quality control.
• Assist in monitoring construction activities regularly to ensure the data centre facility is built to group standards.
• Review design consultant’s work to ensure design documents are sufficiently developed with all necessary engineering calculations.
• Maintain K2 internal engineering standards, focusing on HVAC and plumbing systems.
• Support project commissioning and final handover activities.
• Contribute to internal engineering design and development activities.
• Uphold engineering and operation procedures following K2 standards.

• Walking job sites with uneven terrain.
• Working at heights and in noisy environments.
• Working in confined spaces.
• Physical tasks including lifting, bending, twisting, and using hands for manipulation of small objects.

• Fresh graduates with a Bachelor’s in Mechanical/Electrical or Building Services Engineering.
• Experience in building services design and construction project delivery, preferably data centre projects.
• Knowledge of Electrical HV/LV distribution engineering and interest in data centre projects.
• Proficiency in MS Office and electrical/mechanical calculation software such as Etap, IES, E20.
• Good command of English; additional languages like Chinese or Bahasa Indonesia/Malaysia are a plus.
• Active, initiative, conscientious, sociable, flexible, and optimistic candidates.

• Customer service-oriented.
• Calm under pressure.
• Self-motivated and able to work independently.
• Punctual, reliable, and detail-oriented.

• Seniority level: Internship.
• Employment type: Full-time.
• Job function: Management and Manufacturing.
• Industry: Software Development.

Purpose of the Role:

Due to K2 expansion, APAC technical and delivery team looking to hire Engineering Trainee to support our internal design team management and design review work. This person will be working closely with SG HQ based Project Management team to handle the daily design related issues for existing and future projects in APAC region.

Responsibilities:

• Assist Project Manager / Design Manager / Site Delivery Manager in data centre design and construction phases for site management and construction quality control.

• Assist to monitor construction activities closely on a regular basis and ensure the data centre facility is built to group's standard.

• Assist to review design consultant’s work to ensure design documents are sufficiently developed with all necessary engineering calculations in place.

• Assist to maintain K2 internal engineering standard with particular focus on HVAC and plumbing systems.

• Assist Project Manager / Design Manager in works related to project commissioning and final handover activities.

• Assist Project Manager / Design Manager in K2 internal engineering design and development activities.

• Assist to uphold the engineering and operation procedures following K2 standard.

Working environment entails

• Walking job sites which have areas of uneven terrain.

• Work at heights.

• Work in a noisy environment.

• Work in confined spaces.

• Work environment applicable to operation team

  • Regularly lift and/or move items and participate in group lifts.

  • Work shifts longer than eight hours in duration.

  • Co-ordinate body movements when using tools or equipment.

  • May require bending or twisting the body to access equipment while working.

  • Involves performing physical tasks all day.

  • Use hands to manipulate small wires and objects.

  • Push or pull objects into position.

Skills Set and Qualifications Requirements:

• Fresh Graduate with Bachelor’s in Mechanical/Electricalor Building Services Engineering

• Working experience in building services design and construction project delivery (data centre projects preferred).

• Good knowledge in Electrical HV/LV distribution Engineering with interest in understanding on data centre project and protection study preferred

• Proficiency in MS Office (e.g., Word, Excel, PowerPoint, etc) with experience in Electrical or Mechanical calculation software, such as Etap, IES, E20

• Good command of written and spoken English is required. Additional language skills such as Chinese and/or Bahasa Indonesia/Malaysia will be preferred.

• Candidates who are active, initiative, conscientious, sociable, flexible and optimistic.

Interpersonal Requirements:

• Committed to the delivery of excellent customer service.

• Calm Manner, able to work under pressure.

• Self-motivated, ability to work on own initiative.

• Punctual and reliable.

• Good attention to detail.

Engineering Graduate Trainee (Mechanical)

Join to apply for the Engineering Graduate Trainee (Mechanical) role at K2 STRATEGIC .

Get AI-powered advice on this job and more exclusive features.

Purpose of the Role

Due to K2 expansion, the APAC technical and delivery team is looking to hire an Engineering Trainee to support our internal design team management and design review work. This person will work closely with the SG HQ-based Project Management team to handle daily design-related issues for existing and future projects in the APAC region.

Responsibilities

• Assist Project Manager / Design Manager / Site Delivery Manager in data centre design and construction phases for site management and construction quality control.
• Assist in monitoring construction activities regularly to ensure the data centre facility is built to group standards.
• Review design consultant’s work to ensure design documents are sufficiently developed with all necessary engineering calculations.
• Maintain K2 internal engineering standards, focusing on HVAC and plumbing systems.
• Support project commissioning and final handover activities.
• Contribute to internal engineering design and development activities.
• Uphold engineering and operation procedures following K2 standards.

Working Environment

• Walking job sites with uneven terrain.
• Working at heights and in noisy environments.
• Working in confined spaces.
• Physical tasks including lifting, bending, twisting, and using hands for manipulation of small objects.

Job Requirements

• Fresh graduates with a Bachelor’s in Mechanical/Electrical or Building Services Engineering.
• Experience in building services design and construction project delivery, preferably data centre projects.
• Knowledge of Electrical HV/LV distribution engineering and interest in data centre projects.
• Proficiency in MS Office and electrical/mechanical calculation software such as Etap, IES, E20.
• Good command of English; additional languages like Chinese or Bahasa Indonesia/Malaysia are a plus.
• Active, initiative, conscientious, sociable, flexible, and optimistic candidates.

Interpersonal Skills

• Customer service-oriented.
• Calm under pressure.
• Self-motivated and able to work independently.
• Punctual, reliable, and detail-oriented.

Additional Details

• Seniority level: Internship.
• Employment type: Full-time.
• Job function: Management and Manufacturing.
• Industry: Software Development.

Purpose of the Role:

Due to K2 expansion, APAC technical and delivery team looking to hire Engineering Trainee to support our internal design team management and design review work. This person will be working closely with SG HQ based Project Management team to handle the daily design related issues for existing and future projects in APAC region.

Responsibilities:

• Assist Project Manager / Design Manager / Site Delivery Manager in data centre design and construction phases for site management and construction quality control.

• Assist to monitor construction activities closely on a regular basis and ensure the data centre facility is built to group's standard.

• Assist to review design consultant’s work to ensure design documents are sufficiently developed with all necessary engineering calculations in place.

• Assist to maintain K2 internal engineering standard with particular focus on HVAC and plumbing systems.

• Assist Project Manager / Design Manager in works related to project commissioning and final handover activities.

• Assist Project Manager / Design Manager in K2 internal engineering design and development activities.

• Assist to uphold the engineering and operation procedures following K2 standard.

Working environment entails

• Walking job sites which have areas of uneven terrain.

• Work at heights.

• Work in a noisy environment.

• Work in confined spaces.

• Work environment applicable to operation team

  • Regularly lift and/or move items and participate in group lifts.

  • Work shifts longer than eight hours in duration.

  • Co-ordinate body movements when using tools or equipment.

  • May require bending or twisting the body to access equipment while working.

  • Involves performing physical tasks all day.

  • Use hands to manipulate small wires and objects.

  • Push or pull objects into position.

Skills Set and Qualifications Requirements:

• Fresh Graduate with Bachelor’s in Mechanical/Electricalor Building Services Engineering

• Working experience in building services design and construction project delivery (data centre projects preferred).

• Good knowledge in Electrical HV/LV distribution Engineering with interest in understanding on data centre project and protection study preferred

• Proficiency in MS Office (e.g., Word, Excel, PowerPoint, etc) with experience in Electrical or Mechanical calculation software, such as Etap, IES, E20

• Good command of written and spoken English is required. Additional language skills such as Chinese and/or Bahasa Indonesia/Malaysia will be preferred.

• Candidates who are active, initiative, conscientious, sociable, flexible and optimistic.

Interpersonal Requirements:

• Committed to the delivery of excellent customer service.

• Calm Manner, able to work under pressure.

• Self-motivated, ability to work on own initiative.

• Punctual and reliable.

• Good attention to detail.

We are seeking an enthusiastic and knowledgeable Graduate Engineering Trainee to join our Medical Devices Manufacturing engineering team.

Position: Graduate Engineering Trainee (GET) – Contract basis

Location: Flex, 1, Kallang Place, Singapore

Objective:

Our trainee program aimed at grooming and developing potential Engineers on a contract basis for a duration of 1-2 years. This program will offer comprehensive training and hands-on experience in Test Engineering Assistant.

Program Highlights:

• In-Depth Training: Trainees will receive extensive training on systems, processes, and products.
• Hands-On Experience: Trainees will support Engineers on various projects, ensuring practical application of their learning.
• Project Involvement: In addition to case-by-case assignments with guidance, participants will engage in lean projects or Kaizen events to enhance their skills.

Training Programs:

1. Validation Training (Tester, Equipment and Facility Validation).

• Hand on opportunity for both documentation and validation execution.

2. Product Training (Basis understanding of different Medical Product).

3. Training of different subassembly (Optics, Robotics, Fluidic and others).

4. Training of different commodities (PCBA, Electro-Mechanical, Mechanical, Cable Hardness etc)

(a) NCMR Verification

(b) Opportunity of understanding PCBA process at PCBA Site

5. Troubleshooting (Hand on) including DMAIC Concept

(a) Yield Improvement Project (Cover both Process and Parts cases) with hand on activities

(b) Area cover could include:

- Chemical usage

- Optics Calibration and Alignment

- Assembly Process (Important of Process Validation)

- Different Commodities Parts (intermittent with parts at Limit measurement)

- Tester related (Important of Validation, PM and Calibration)

- Product Design Issue

- Derive Long term solution to prvent the reoccurrence

6. Establish of Test Procedure

7. Tester Study and Fabrication – Case Study

8. Electrical Safety Test Setup and requirement

9. Cycle Time Study on Station and Tester requirement

Job requirements:

• Student who has just graduated or is in their final year of engineering (Preferred Electrical, Electronics, Communication, Instrumentation, Bio-Medical, Mechanical Engineering). Other engineering disciplines will be assessed on case-by-case basis.
• Strong academic performance.
• Basic understanding of engineering principles and theories.
• Excellent problem-solving abilities and detail orientation.
• Good interpersonal and communication skills.
• Proficient in MS Office and relevant engineering software.

We are seeking an enthusiastic and knowledgeable Graduate Engineering Trainee to join our Medical Devices Manufacturing engineering team.

Position: Graduate Engineering Trainee (GET) – Contract basis

Location: Flex, 1, Kallang Place, Singapore

Objective:

Our trainee program aimed at grooming and developing potential Engineers on a contract basis for a duration of 1-2 years. This program will offer comprehensive training and hands-on experience in Test Engineering Assistant .

Program Highlights:

• In-Depth Training: Trainees will receive extensive training on systems, processes, and products.
• Hands-On Experience: Trainees will support Engineers on various projects, ensuring practical application of their learning.
• Project Involvement: In addition to case-by-case assignments with guidance, participants will engage in lean projects or Kaizen events to enhance their skills.

Training Programs:

1. Validation Training (Tester, Equipment and Facility Validation).

• Hand on opportunity for both documentation and validation execution.

2. Product Training (Basis understanding of different Medical Product).
3. Training of different subassembly (Optics, Robotics, Fluidic and others).
4. Training of different commodities (PCBA, Electro-Mechanical, Mechanical, Cable Hardness etc)
(a) NCMR Verification
(b) Opportunity of understanding PCBA process at PCBA Site

5. Troubleshooting (Hand on) including DMAIC Concept
(a) Yield Improvement Project (Cover both Process and Parts cases) with hand on activities
(b) Area cover could include:
- Chemical usage
- Optics Calibration and Alignment
- Assembly Process (Important of Process Validation)
- Different Commodities Parts (intermittent with parts at Limit measurement)
- Tester related (Important of Validation, PM and Calibration)
- Product Design Issue
- Derive Long term solution to prvent the reoccurrence

6. Establish of Test Procedure
7. Tester Study and Fabrication – Case Study
8. Electrical Safety Test Setup and requirement
9. Cycle Time Study on Station and Tester requirement

Job requirements:

• Student who has just graduated or is in their final year of engineering (Preferred Electrical, Electronics, Communication, Instrumentation, Bio-Medical, Mechanical Engineering). Other engineering disciplines will be assessed on case-by-case basis.
• Strong academic performance.
• Basic understanding of engineering principles and theories.
• Excellent problem-solving abilities and detail orientation.
• Good interpersonal and communication skills.
• Proficient in MS Office and relevant engineering software.

First Derivative is driven by people, data, and technology, unlocking the value of insight, hindsight, and foresight to drive organizations forward. Counting many of the world's leading investment banks as clients, we help our clients navigate the data-driven, digital revolution that is transforming the financial services sector. Our global teams span across 15 offices serving clients across EMEA, North America and APAC.

As an EPAM Systems, Inc. (NYSE: EPAM) company, a leading global provider of digital platform engineering and development services, we deliver advanced financial services solutions by empowering operational insights, driving innovation, and enabling more effective risk management in an increasingly data-centric world. Together with EPAM, we combine deep industry expertise with cutting-edge technology to help clients stay ahead in a rapidly evolving financial landscape, offering comprehensive solutions that drive business transformation and sustainable growth.

Does the world of data excite you? Look no further.

We are looking for a Graduate Engineer who will play an integral role in supporting our clients as they adapt to the data-driven digital transformation reshaping the financial services industry. You’ll be building your technical expertise from the outset, developing tailored solutions for our clients in several areas.

This role is ideal for an undergraduate or master's graduate eager to pursue a technical career path while enhancing data and technology capabilities.

Project exposure:

• Knowledge of Technical Business Analysis
• Proficiency in Systems and Application Support
• Skills in Software Testing
• Expertise in Data Engineering
• Understanding of Data Management
• Familiarity with Cloud Computing

Work with leading technologies such as Java, AWS, Google Cloud, Python, and KX.

Responsibilities

• Deliver tailored technical solutions that align with client needs
• Support the deployment of data management, data engineering, and cloud technologies
• Collaborate with diverse teams to ensure project success
• Conduct technical business analysis to identify and refine process improvements
• Test and address issues within software systems to meet client expectations

Requirements

• Bachelor’s or master’s degree in a related technical discipline
• 0-2 years of experience in data engineering, cloud technologies, or software testing
• Competency in communication, collaboration, and flexibility within dynamic settings
• Familiarity with programming languages, such as Python, Java, or similar
• Drive to pursue a technical career while emphasizing learning and innovation

We offer

• By choosing EPAM, you're getting a job at one of the most loved workplaces according to Newsweek 2021 & 2022&2023.
• Employee ideas are the main driver of our business. We have a very supportive environment where your voice matters
• You will be challenged while working side-by-side with the best talent globally. We work with top-notch technologies, constantly seeking new industry trends and best practices
• We offer a transparent career path and an individual roadmap to engineer your future & accelerate your journey
• At EPAM, you can find vast opportunities for self-development: online courses and libraries, mentoring programs, partial grants of certification, and experience exchange with colleagues around the world. You will learn, contribute, and grow with us

Life at EPAM

• EPAM is a leading global provider of digital platform engineering and development services. EPAM has been expanding in Singapore since 2013 and delivering the best solutions to our customers. As a recognized leader, EPAM Singapore achieved Great Place to Work Certification in 2023 and is committed to providing our team with inspiring careers.
• You will have the opportunity to work with fellow talented technologists and accelerate your career by participating in our numerous upskilling, training, and certification programs. That is why EPAM Singapore was awarded Gold for Best In-House Certification Programmes in the Employee Experience Awards 2023 and Silver in the SkillsFuture Employers Awards 2022 for our efforts in championing employees' skills development and building a lifelong learning culture at the workplace. You can also look forward to developing holistically with the multiracial festivals and various wellness and cultural activities organized by our passionate colleagues here.

Get AI-powered advice on this job and more exclusive features.

First Derivative is driven by people, data, and technology, unlocking the value of insight, hindsight, and foresight to drive organizations forward. Counting many of the world's leading investment banks as clients, we help our clients navigate the data-driven, digital revolution that is transforming the financial services sector. Our global teams span across 15 offices serving clients across EMEA, North America and APAC.

As an EPAM Systems, Inc. (NYSE: EPAM) company, a leading global provider of digital platform engineering and development services, we deliver advanced financial services solutions by empowering operational insights, driving innovation, and enabling more effective risk management in an increasingly data-centric world. Together with EPAM, we combine deep industry expertise with cutting-edge technology to help clients stay ahead in a rapidly evolving financial landscape, offering comprehensive solutions that drive business transformation and sustainable growth.

Does the world of data excite you? Look no further.

We are looking for a Graduate Engineer who will play an integral role in supporting our clients as they adapt to the data-driven digital transformation reshaping the financial services industry. You’ll be building your technical expertise from the outset, developing tailored solutions for our clients in several areas.

This role is ideal for an undergraduate or master's graduate eager to pursue a technical career path while enhancing data and technology capabilities.

Project exposure:

• Knowledge of Technical Business Analysis
• Proficiency in Systems and Application Support
• Skills in Software Testing
• Expertise in Data Engineering
• Understanding of Data Management
• Familiarity with Cloud Computing
  
  
  

• Deliver tailored technical solutions that align with client needs
• Support the deployment of data management, data engineering, and cloud technologies
• Collaborate with diverse teams to ensure project success
• Conduct technical business analysis to identify and refine process improvements
• Test and address issues within software systems to meet client expectations
  
  
  

• Bachelor’s or master’s degree in a related technical discipline
• 0-2 years of experience in data engineering, cloud technologies, or software testing
• Competency in communication, collaboration, and flexibility within dynamic settings
• Familiarity with programming languages, such as Python, Java, or similar
• Drive to pursue a technical career while emphasizing learning and innovation
  
  
  

• By choosing EPAM, you're getting a job at one of the most loved workplaces according to Newsweek 2021 & 2022&2023.
• Employee ideas are the main driver of our business. We have a very supportive environment where your voice matters
• You will be challenged while working side-by-side with the best talent globally. We work with top-notch technologies, constantly seeking new industry trends and best practices
• We offer a transparent career path and an individual roadmap to engineer your future & accelerate your journey
• At EPAM, you can find vast opportunities for self-development: online courses and libraries, mentoring programs, partial grants of certification, and experience exchange with colleagues around the world. You will learn, contribute, and grow with us
  
  
  

• EPAM is a leading global provider of digital platform engineering and development services. EPAM has been expanding in Singapore since 2013 and delivering the best solutions to our customers. As a recognized leader, EPAM Singapore achieved Great Place to Work Certification in 2023 and is committed to providing our team with inspiring careers.
• You will have the opportunity to work with fellow talented technologists and accelerate your career by participating in our numerous upskilling, training, and certification programs. That is why EPAM Singapore was awarded Gold for Best In-House Certification Programmes in the Employee Experience Awards 2023 and Silver in the SkillsFuture Employers Awards 2022 for our efforts in championing employees' skills development and building a lifelong learning culture at the workplace. You can also look forward to developing holistically with the multiracial festivals and various wellness and cultural activities organized by our passionate colleagues here.
  
  
  

• Seniority level Entry level

• Employment type Full-time

• Job function Business Development, Information Technology, and Engineering
• Industries Software Development and IT Services and IT Consulting

Referrals increase your chances of interviewing at EPAM Systems by 2x

We’re unlocking community knowledge in a new way. Experts add insights directly into each article, started with the help of AI.

RED , an expanding international M&E consultancy with a proven track record in low energy design, focuses on providing excellent design solutions to clients.

We are seeking an experienced Graduate Engineer (Mechanical / Electrical / Building Services) to be based in our Malaysia office. The successful candidate will have the ability to manage small and large projects and undertake client-facing roles in the development, design, and coordination of engineering projects. Experience in delivering data centres, along with other sectors such as commercial, hotel, retail, and hospitality design, is desirable.

The candidate should possess excellent communication and interpersonal skills, with experience working on innovative projects with leading client organizations and contractors. This will enable you to take a proactive role in forging client relationships within our sector portfolio.

You should have good commercial awareness, robust technical knowledge relevant to building services design, and the ability to incorporate these technologies into the hotel/hospitality and leisure sectors. The role is ideally suited for someone currently working in building services consultancy and willing to work hands-on.

Job Description

• Manage small projects, including research, development, design, coordination, and monitoring of engineering services for Mechanical or Electrical installations, systems, and equipment.
• Develop and specify applications of controls, instruments, and operating systems for building engineering services.
• Conduct surveys, tests, and report on existing electrical/mechanical installations.
• Specify activities to ensure manufacturing, construction, installation, and operational testing meet specifications and customer requirements.
• Represent the company at technical meetings with customers, professional teams, and contractors.
• Prepare specification modifications (Word or Excel).
• Ensure engineering calculations and drawings meet industry and legal standards.
• Validate input from Intermediate & Graduate Engineers into designs.

Experiences / Qualifications

• Licensed or degree-qualified with sufficient experience in international consulting engineering.
• Working towards MCIBSE/MIEE/Professional/Chartered Engineer or equivalent status.
• Experience in specification design/drawing for at least one building type.
• Good knowledge of health and safety legislation.
• Proficiency in MS Office, including Excel, and IT-based calculation software.
• Understanding of BS SC standards and international design codes.
• Ability to prioritize workload and meet deadlines.
• Managerial skills and ethical conduct in line with the company's ethics guidelines.

If you believe you can contribute to our award-winning team and help RED continue its exciting journey, we want to hear from you!

• Seniority level: Entry level
• Employment type: Full-time
• Job function: Consulting and Engineering

Note: The job posting appears active; no indications of expiration are present.