196 Engineering Firms jobs in Singapore

We are looking for a hands-on Electrical Engineering Technician to help with wiring, testing, and troubleshooting of electrical parts and systems. You’ll work both on-site and in our workshop, supporting our engineers with electrical actuators, valves, and equipment setup.

• Assist in installing and testing electrical actuators, sensors, and control systems
• Conduct basic wiring, continuity checks, and verify power connections
• Support troubleshooting of pressure-independent control valves and related systems
• Calibrate actuators and set torque or timing parameters according to specifications
• Assist in programming or operating workshop machinery (e.g., CNC equipment)
• Document test results, wiring configurations, and troubleshooting steps
• Follow safety standards and assist in maintaining electrical equipment and tools

• Diploma or degree (or pursuing) in Electrical Engineering or related field
• Basic understanding of electrical circuits, wiring, and testing instruments
• Hands-on aptitude with mechanical or electrical tools and systems
• Ability to read electrical schematics or wiring diagrams (preferred)
• Strong problem-solving skills and attention to detail
• Willingness to work on-site or in workshop environments
• Team player with good communication and documentation skills

• Assist in the design, testing, and installation of electrical systems and equipment
• Conduct routine maintenance and troubleshooting of electrical components
• Read and interpret electrical schematics, blueprints, and technical drawings
• Support engineers in prototype development and modifications
• Ensure compliance with safety standards and electrical codes

• Diploma or equivalent in Electrical Engineering or related field
• Proven experience in electrical systems, troubleshooting, or technical support
• Strong knowledge of electrical tools, instruments, and diagnostic equipment
• Excellent attention to detail and problem-solving skills
• Ability to work independently and as part of a team

Job Description:

• Perform installation of electrical related equipment following company policies and manufacturer’s specifications.

• Carry out wiring of both low and line voltage to cooling and heating equipment.

• Determine the right material needed for installation work by pre-measuring jobs.

• Provide necessary support to other team members to be able to complete tasks on time as instructed by management.

Job Requirement:

• Physically capable of performing the above duties.

• With relevant experience in electrical work.

• Possess good electricaltechnical knowledge.

• Shall be a Proffessional Engineer (Elect) registrered with PEB Singapore.
• shall have demonstrable experience in managing the detailed design of electrical distribution systems for facilities of similar complexity and scale as the project ( Water or process plants)
• shall have about 15 years of relevant experience

• Position : Sales Engineer (Mechanical /Electrical Engineering) - ALL WELCOME
• Location : Novena (5 minute walk - Nearest Novena MRT)
• Working hours : 5 days work week (Monday - Friday) - 9am -6pm
• Salary (commensurate with experience) : Gross Up to $4500 (Basic $300 + Transport Allowance 500 + Performance Bonus - up to 2 months) + 14 days Annual Leave
• Duration : Permanent
• Industry : Market leader in the fountain technology industry.

Main Responsibilities:

• To identify and develop new business opportunities through market research and client outreach.
• To understand customer technical requirements and propose suitable solutions.
• To collaborate with internal teams (engineering, design) to develop tailored solutions.
• To prepare and deliver technical proposals, quotations, and other documentations so to secure the orders
• To provide pre-sales and post-sales technical support and guidance to customers
• To maintain strong relationships with existing clients and ensure customer satisfaction
• To manage sales pipeline to drive new business opportunities to commercial success
• To prepare sales pipeline and forecasts
• To grow water fountain technology businesses regional
• To deliver yearly sales targets

Requirements:

• Possess a Diploma in mechanical or electrical Engineering, others background is welcomed
• Willing to develop knowledge and expertise
• Confident telephone manner with excellent verbal and written communication skills
• Highly self-motivated and able to work autonomously

Send your resume via Email to

Like us on Facebook or Instagram (For Career tips and Job vacancies): /

Join us on LinkedIn:

***We do not charge our candidates any referral fee nor bind them with any contract.***

Jane Chua

Deputy Consulting Director (APAC)

License no: 13C6684

EA Personnel: R2197224

Thank you for your interest in this position. Our shortlisting period is 3 working days. Only shortlisted candidates will be contacted for further consideration.

If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend that you continue your job search to maximize your opportunities. We wish you all the best and should we have any suitable roles that match your experiences/ qualifications/ preferences, we will reach out to you.

• Position : Sales Engineer (Mechanical /Electrical Engineering) - ALL WELCOME
• Location : Novena (5 minute walk - Nearest Novena MRT)
• Working hours : 5 days work week (Monday - Friday) - 9am -6pm
• Salary (commensurate with experience) : Gross Up to $4500 (Basic $300 + Transport Allowance 500 + Performance Bonus - up to 2 months) + 14 days Annual Leave
• Duration : Permanent
• Industry : Market leader in the fountain technology industry.

Main Responsibilities:

• To identify and develop new business opportunities through market research and client outreach.
• To understand customer technical requirements and propose suitable solutions.
• To collaborate with internal teams (engineering, design) to develop tailored solutions.
• To prepare and deliver technical proposals, quotations, and other documentations so to secure the orders
• To provide pre-sales and post-sales technical support and guidance to customers
• To maintain strong relationships with existing clients and ensure customer satisfaction
• To manage sales pipeline to drive new business opportunities to commercial success
• To prepare sales pipeline and forecasts
• To grow water fountain technology businesses regional
• To deliver yearly sales targets

Requirements:

• Possess a Diploma in mechanical or electrical Engineering, others background is welcomed
• Willing to develop knowledge and expertise
• Confident telephone manner with excellent verbal and written communication skills
• Highly self-motivated and able to work autonomously

Send your resume via Email to

Like us on Facebook or Instagram (For Career tips and Job vacancies): /

Join us on LinkedIn:

***We do not charge our candidates any referral fee nor bind them with any contract.***

Jane Chua

Deputy Consulting Director (APAC)

License no: 13C6684

EA Personnel: R2197224

Thank you for your interest in this position. Our shortlisting period is 3 working days. Only shortlisted candidates will be contacted for further consideration.

If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend that you continue your job search to maximize your opportunities. We wish you all the best and should we have any suitable roles that match your experiences/ qualifications/ preferences, we will reach out to you.

Engineer, Electrical Engineering, APAC page is loadedEngineer, Electrical Engineering, APAC Apply locations Singapore, Singapore time type Full time posted on Posted 30+ Days Ago job requisition id R17665About Vantage Data Centers

Vantage Data Centers powers, cools, protects and connects the technology of the world’s well-known hyperscalers, cloud providers and large enterprises. Developing and operating across North America, EMEA and Asia Pacific, Vantage has evolved data center design in innovative ways to deliver dramatic gains in reliability, efficiency and sustainability in flexible environments that can scale as quickly as the market demands.

About Vantage Data Centers

Vantage is committed to being a workplace of inclusion, equity, respect and acceptance. We celebrate diversity and intentionally seek out opportunities to learn from one another’s experience.

Vantage Data Centers powers, cools, protects and connects the technology of the world’s well-known hyperscalers, cloud providers and large enterprises. Developing and operating across North America, EMEA and Asia Pacific, Vantage has evolved data center design in innovative ways to deliver dramatic gains in reliability, efficiency and sustainability in flexible environments that can scale as quickly as the market demands.

D&E Department

The Design & Engineering (D&E) team drives the technology, innovation, new development, quality and engineering excellence of data center infrastructure across Vantage’s companywide portfolio. D&E evaluates the technical viability of new sites, drives engineering solutions, cost and scheduling efficiencies in line with corporate goals, and serves as subject matter experts across the entire project lifecycle from concept design through to commissioning.

The D&E team collaborates strongly with Sales, Operations, regional management, and global innovation groups along the way. D&E also works hand in hand with the Construction team to develop and drive a vertically integrated design and ensures existing standards, regulatory frameworks and designs are managed and executed effectively, across our diverse APAC existing market, plus will support the strategic positioning of Vantage’s successful entry into emerging markets.

One thing that distinguishes Vantage is that our technical staff are given the responsibility and authority to directly drive tangible results. Our team can align long-term operational sustainability with value engineering and cost metrics to deliver products aligned with corporate goals. This approach empowers each member of the team to drive high-impact decisions and results.

Position Description

Vantage is looking for a Senior Electrical Engineer, to be our Electrical engineering design and assurance activities across the APAC. We offer a professionally challenging and dynamic operating environment with responsibilities around new site development, facilitating design excellence before feeding into the construction process, as well as facility adapts for our key customers.

Our preference is for this role to be based in Singapore.

You will play a key role in the design production team that leads design and engineering for the largest individual cost center within the construction process and become engaged in all technical aspects. In this role, you will be responsible for high-level schematic system design, specification development, submittal review, design document review, management of design-build contractors, oversight of installation, participation in commissioning, and transition to operations.

Regular collaboration and proactive coordination is required with architectural, civil/structural, mechanical, security, automation and BMS contractors, as well as the construction management, project management teams and the equipment procurement team. You will be presented with complex engineering challenges and be asked to bring them to resolution with all the tools at your disposal. You will ensure existing design standards are executed and enhanced for each project, underpinned by your strong understanding of regional Regulations and Electrical standards which vary across our operating portfolio. You will evaluate designs and provide engineering analysis to balance CAPEX and OPEX costs. Customer interface is necessary throughout design and construction.

You will provide technical engineering information and assistance to ensure that new datacenter facilities comply with our bespoke customer requirements, are aligned with regional and global Vantage standards (as applicable), with unique the project requirements, all engineering standards, applicable codes, and specifications. A strong and broad knowledge across of all aspects of electrical engineering is required, including UPS systems, generators, distribution topologies, utility integration, switchgear design and implementation, fault level and arc flash analysis, sequence of operations, and value engineering as they relate to designing state-of-the-art datacenters. A strong understanding of communications, electronic security, vertical transportation and controls/monitoring is also recommended.

Essential Job Functions

• Manage our external MEP design consultants throughout the design and construction process.
• Work with a team of design, engineering and construction professionals on a wide variety of conceptual design and build projects and site adapts.
• Serve as a technical subject matter expert (SME) including review of electrical systems, evaluating HV/MV topology design options, sequence of operations, conduit & containment proposals, sequence of operations, cable calculations, BIM reviews, electrical protection & arc flash studies and commissioning scripts.
• Utilize engineering analysis programs and professional judgment to analyze loads, lighting levels, short-circuit currents including:
• Lighting photometric studies
• Short-circuit and overcurrent protection device coordination studies.
• Electrical protection coordination studies.
• Arc Flash protection and magnitude mitigation studies.
• Distribution analysis, including: voltage drop and underground duct bank heat effect (Neher-McGrath) calculations.
• Liaise and coordinate with other Vantage SMEs for the review of communications, electronic security, vertical transportation and controls/monitoring.
• Coordinate with external design teams including M&E consultants, C&S consultants, architects, design/build contractors, power authorities and equipment vendors.
• Effectively communicate design standards, local and building code regulatory considerations to internal and external project partners across APAC region.
• Communicate conceptual designs, Safety in Design (SiD considerations and mitigation measures), and create/maintain project documentation before, during, and after construction.
• Develop and maintain design standards, design prototypes, and template specifications related to site designs and supporting infrastructure.
• Coordinate with Due Diligence and Commercial teams to help inform and determine site selection criteria in relation to electrical and telecommunications infrastructure and review Due Diligence reports.
• Create, review, and manage related design aspects of RFPs.
• Be adept at managing multiple projects simultaneously. Foresee and manage internal expectations regarding project-specific costs and schedules variables, contributing to CapeX modelling and optioneering; lead initiatives aimed at improving cost, quality, schedule, and consistency.
• Support construction and any testing / commissioning activities as needed at site.
• Travel for site assessments, internal design meetings, construction review, and interfacing with authorities having jurisdiction.
• Having a sound knowledge on modular design, alternative standby-power and other innovative designs / technologies.
• Additional duties as required by management.

Skills, Experience & Attributes

• A leader in your field of expertise with credible personal brand, actively demonstrating a commitment to data center electrical design and engineering best practice, personal professional development, and data centre industry engagement.
• Accredited degree and up to date local certifications in Electrical Engineering. Singapore or other regional Professional Engineering certification is preferred but not required.
• A commitment to contributing to a team culture that strongly supports diversity, inclusion and equity.
• Strong design management, problem solving and analytical skills and demonstratable experience.
• Minimum 10 years electrical engineering experience on complex building projects (e.g. telecommunications, process, semiconductor, pharmaceutical etc.)
• Data Center experience is essential in this role; experience in APAC construction markets is required.
• Working knowledge of critical power infrastructure within a data center project from external power supply, to end circuit supply to the racks.
• Proficiency in electrical design software e.g. PowerCAD, ETAP, AmpCalc or equivalent.
• Proficient with other construction development software including REVIT, AutoCAD, BIM360/Navisworks and MS Office Suite.
• Proficiency in building codes, fire codes, regulations, and local, regional and international standards.
• Experience interpreting and creating construction drawings, specifications and submittal documents.
• Excellent teamwork and leadership skills. There is an expectation that this role will eventually have direct reports and/or mentor junior engineers.

We operate with No Ego and No Arrogance. We work to build each other up and support one another, appreciating each other’s strengths and respecting each other’s weaknesses. We find joy in our work and each other, actively seeking opportunities to inject fun into what we do. Our hard and efficient work is rewarded with an above market total compensation package. We offer a comprehensive suite of health and welfare, retirement, and paid leave benefits exceeding local expectations.

Safety and security always matter. During COVID, all positions that can work remotely have been, and appropriate steps have been taken to ensure the safety of employees in any position essential to be on site. Regardless of where you are working, technology to work effectively is provided on or in advance of your first day of employment.

Throughout the year, the advantage of being part of the Vantage team is evident with an array of benefits, recognition, training and development, and the knowledge that your contribution adds value to the company and our community.

Don't meet all the requirements? Please still apply if you think you are the right person for the position. We are always keen to speak to people who connect with our mission and values.

Vantage Data Centers is an Equal Opportunity Employer

We operate with No Ego and No Arrogance. We work to build each other up and support one another, appreciating each other’s strengths and respecting each other’s weaknesses. We find joy in our work and each other, actively seeking opportunities to inject fun into what we do. Our hard and efficient work is rewarded with an above market total compensation package. We offer a comprehensive suite of health and welfare, retirement, and paid leave benefits exceeding local expectations.

Throughout the year, the advantage of being part of the Vantage team is evident with an array of benefits, recognition, training and development, and the knowledge that your contribution adds value to the company and our community.

Don't meet all the requirements? Please still apply if you think you are the right person for the position. We are always keen to speak to people who connect with our mission and values.

Vantage Data Centers is an Equal Opportunity Employer

Vantage Data Centers does not accept unsolicited resumes from search firm agencies. Fees will not be paid in the event a candidate submitted by a recruiter without an agreement in place is hired; such resumes will be deemed the sole property of Vantage Data Centers.

Overview of role:

As an installation engineer, your primary role is to oversee the installation of various systems, equipment, or machinery.

Responsibilities:

• Collaborate with project managers and other stakeholders to plan installation activities, including scheduling, resource allocation, and site preparation.
• Inspect equipment or systems prior to installation to ensure they meet specifications and are in proper working condition.
• Conduct on-site assessments to evaluate installation requirements, including space constraints, access points, and safety considerations.
• Lead installation teams, providing guidance and direction to technicians, contractors, and subcontractors to ensure efficient and safe installation processes.
• Assemble and configure equipment or systems according to manufacturer guidelines and technical specifications, ensuring proper alignment, calibration, and functionality.
• Conduct tests and commissioning activities to verify the functionality and performance of installed systems, troubleshooting any issues or discrepancies as needed.
• Implement quality control measures to ensure installations meet company standards and customer requirements, conducting inspections and audits throughout the installation process.
• Ensure compliance with relevant regulations, codes, and safety standards during installation activities, promoting a culture of safety among installation teams.
• Maintain accurate records of installation activities, including documentation of materials used, work performed, and any deviations from the original plan. Prepare reports for project managers and clients as required.
• Ensure customer satisfaction by delivering installations that meet or exceed expectations, addressing any concerns or issues promptly and professionally.

Requirements:

• Candidates with Railway experience will be preferred.
• Minimum 3 years experience in installation of electrical and communication infrastructures.
• Diploma in Electrical/Mechanical Engineering or its equivalent, preferred.
• Team player with good interpersonal and communication skills.
• Willing to work outside of prime office hours as required.
• Self-motivated and Service oriented.
• Able to work independently with minimum guidance.

We are looking for a Research Fellow that supports the photonic platform development at the National Center of Advanced Integrated Photonics. The Research Fellow will be instrumental in guiding and the development of photonic platform and advanced chip design.

Key Responsibilities:

• Development and guide cutting-edge photonic platform development
• Design of high-performance large-scale photonic integrated circuits
• Coordinate foundry submissions for the entire center

Job Requirements:

• PhD in electrical engineering, with more than 4 years of relevant experience.
• Skills in photonic platform development and chip design.
• Ability to publish in academic journals, and present in conferences.
• Ability to work well in a team, and collaborate with other research groups.
• Production of photonic layouts using gdsfactory.
• Knowledgeable in MATLAB and Python is necessary.
• Knowledgeable in Ansys Lumerical FDTD, MODE, INTERCONNECT, CML COMPILER, MULTIPHYSICS

We regret that only shortlisted candidates will be notified.