1,790 Electrical Testing jobs in Singapore

Job Description & Requirements

• Candidate must possess at least Diploma/Advanced/Higher/Graduate Diploma in Engineering (Electrical/Electronic) or equivalent.
• Having an experience and knowledge in Testing & Commissioning of power plant, substation.
• Knowledge in testing of experience in MV, LV Switchgears and Transformers.
• Operating and interlock checking
• Knowledge of Transformer Differential Protection & REF Protection and its stability test, Bus bar protection and its stability test, over current & Earth fault protection.
• Prepare and study control - protection drawings of all electrical systems.
• Cable schedule preparation based on scheme available at site.
• Testing and commissioning of all Electrical equipment.
• Testing of protective Relays used for various purposes, Experienced with relays such as over current and Earth fault relay.
• Testing of CT, VT, Circuit breaker, Isolator, Earth switch and Switch gear related Electrical equipment and Power transformer.
• Operation and Maintenance of Power Plant and Substation.
• Troubleshooting of all Electrical circuits, control and Protection circuits.
• Good team player and communication skills in project management.
• Required Skill: electrical switch board troubleshooting and commissioning, knowledge in protection relays (ABB, Micom or sepam will plus), knowledge in HV and LV switchgears, troubleshoot skills.

Education:

• Degree holder with experience 3 years
• Diploma holder with experience 8 years

Our Client a European MNC and industry leader in manufacturing of scientific instruments for the process industries would like to invite suitably qualified candidates to join their Team as GC Testing Technician.

GC TESTING TECHNICIAN (6-mth Contract / renewable)

Job Responsibilities

· Setup Gas Chromatography(GC) to test station.

· Blend sample gases for Runout test

· Trouble shooting while GC setup (if required)

· Complete GC final checklist and push GC to repacking area

· Operate GC using Workstation Software (GCP)

Knowledge and Experience required :

· Minimum "O" level, ITE or Diploma in Mechanical, Electrical or Chemical Engineering

· Good safety awareness for working in laboratory or petrochemical plant

· Communication skills with the ability to communicate with team members and supervisor

· Basic computer skills for operating Windows System and Office 365 (Word and Excel)

Other Information

Working Location : Woodlands Spectrum II

Working Hours : 9am – 6pm

SBS Bus : 964

Please email your resume in editable docx format and whatsapp for a brief discussion.

Thank You

Angelina Lim (Reg R / Lic 97C4989)

• Basic up to $3000
• AWS 1 months + Performance Bonus up to 3 months
• Monday to friday, 8.30am-5.30pm
• Location: West
• Company transport provided at Boon Lay and Pioneer MRT

Job Responsibilities:

• Perform optical and electrical testing of silicon photonics chips using automated and manual test equipment (e.g., optical probes, network analyzers, oscilloscopes).
• Assist in test setup calibration, alignment, and troubleshooting.
• Collect, record, and analyze test data to identify performance trends or defects.
• Follow standard operating procedures (SOPs) and maintain detailed documentation.
• Collaborate with engineers to optimize testing workflows and improve yield.
• Support lab maintenance, including equipment upkeep and inventory management.

Job Requirements:

• Singaporean only
• Must have experience in testing wafer

Interested Applicants, kindly send your updated CV to or click on "APPLY NOW".

We regret that only shortlisted candidates will be notified

EA License No: 15C7752

EA Personnel No: R

EA Personnel Name: Chin Jia Hui, Janice

• Conduct 4G/5G drive tests using industry-standard tools and equipment (e.g., TEMS, Nemo).
• Collect, log, and validate RF performance data including coverage, signal quality, throughput, and call drop statistics.
• Analyze drive test logs and generate detailed reports highlighting key findings, issues, and recommendations.
• Identify and troubleshoot RF issues such as coverage gaps, interference, call setup failures, and poor handovers.
• Work with optimization teams to fine-tune network parameters for improved performance.
• Benchmark operator networks against competitors to assess quality of service (QoS).
• Ensure compliance with test plans, schedules, and customer requirements.
• Support acceptance testing (ATP) and new site verification as required.

• ITE/Diploma in Electrical/Electronics/Telecommunications Engineering or related field.
• 2+ years of experience in RF engineering, specifically with 4G/5G drive testing . Fresh Graduate can apply.
• Hands-on experience with drive test tools (e.g., TEMS Investigation, Nemo Outdoor). Good to have but not a must.
• Ability to analyze large data sets and produce actionable insights.
• Strong problem-solving skills and attention to detail.
• Willingness to travel and perform extensive fieldwork and learn new skills.

We are seeking a skilled and detail-oriented RF Engineer to perform 4G/LTE drive tests and optimize network performance. The ideal candidate will be responsible for executing field measurement activities, analyzing network KPIs, troubleshooting coverage/quality issues, and providing recommendations to improve the mobile network experience.

• Conduct 4G/5G drive tests using industry-standard tools and equipment (e.g., TEMS, Nemo).
• Collect, log, and validate RF performance data including coverage, signal quality, throughput, and call drop statistics.
• Analyze drive test logs and generate detailed reports highlighting key findings, issues, and recommendations.
• Identify and troubleshoot RF issues such as coverage gaps, interference, call setup failures, and poor handovers.
• Work with optimization teams to fine-tune network parameters for improved performance.
• Benchmark operator networks against competitors to assess quality of service (QoS).
• Ensure compliance with test plans, schedules, and customer requirements.
• Support acceptance testing (ATP) and new site verification as required.

• ITE/Diploma in Electrical/Electronics/Telecommunications Engineering or related field.
• 2+ years of experience in RF engineering, specifically with 4G/5G drive testing. Fresh Graduate can apply.
• Hands-on experience with drive test tools (e.g., TEMS Investigation, Nemo Outdoor). Good to have but not a must.
• Ability to analyze large data sets and produce actionable insights.
• Strong problem-solving skills and attention to detail.
• Willingness to travel and perform extensive fieldwork and learn new skills.

Our Client a European MNC and industry leader in manufacturing of scientific instruments for the process industries would like to invite suitably qualified candidates to join their Team as GC Testing Technician.

GC TESTING TECHNICIAN (6-mth Contract / renewable)

Job Responsibilities

· Setup Gas Chromatography(GC) to test station.

· Blend sample gases for Runout test

· Trouble shooting while GC setup (if required)

· Complete GC final checklist and push GC to repacking area

· Operate GC using Workstation Software (GCP)

Knowledge and Experience required :

· Minimum "O" level, ITE or Diploma in Mechanical, Electrical or Chemical Engineering

· Good safety awareness for working in laboratory or petrochemical plant

· Communication skills with the ability to communicate with team members and supervisor

· Basic computer skills for operating Windows System and Office 365 (Word and Excel)

Other Information

Working Location : Woodlands Spectrum II

Working Hours : 9am – 6pm

SBS Bus : 964

Please email your resume in editable docx format and whatsapp for a brief discussion.

Thank You!

Angelina Lim (Reg R / Lic 97C4989)

• Basic up to $3000
• AWS 1 months + Performance Bonus up to 3 months
• Monday to friday, 8.30am-5.30pm
• Location: West
• Company transport provided at Boon Lay and Pioneer MRT

Job Responsibilities:

• Perform optical and electrical testing of silicon photonics chips using automated and manual test equipment (e.g., optical probes, network analyzers, oscilloscopes).
• Assist in test setup calibration, alignment, and troubleshooting.
• Collect, record, and analyze test data to identify performance trends or defects.
• Follow standard operating procedures (SOPs) and maintain detailed documentation.
• Collaborate with engineers to optimize testing workflows and improve yield.
• Support lab maintenance, including equipment upkeep and inventory management.

Job Requirements:

• Singaporean only
• Must have experience in testing wafer

Interested Applicants, kindly send your updated CV to or click on “APPLY NOW”.

We regret that only shortlisted candidates will be notified

EA License No: 15C7752
EA Personnel No: R
EA Personnel Name: Chin Jia Hui, Janice