172 Cad Trainee jobs in Singapore

1. DUTIES OF SENIOR DESIGNER :

1.1 To study given architectural and structural drawings inclusive of the relevant shop drawings for preparation of any tender. To be constantly vigilant of all the specifications, requirements and codes for the most cost-effective method of design.

1.2 To co-ordinate and produce concept drawings, shop and detail drawings for checking prior to submission.

1.3 To assist in taking out of quantities of the accessories needed as related to the design.

1.4 To assist in co-ordination of the relevant project site works during presentation, mock-up, installation and completion stages.

1.5 To represent the company in the most appropriate means and conduct during attendance in meetings as and when required.

1.6 To ensure and upkeep proper records of all the given and submission drawings.

1.7 To constantly monitor and maintain the best compliance of drawings’ submission according to the site works’ schedule and programs.

1.8 To educate the workers/installers complete all the site works in the most acceptable quality both in material and workmanship.

1.9 To observed and comply to all site management’s requirements on safety, delivery and health aspects.

1.10 To lead in training of fellow staff, direct workers and sub-contractors to understand and expedite on scope of works accordance to the design criteria. To instruct and ensure such mentioned parties adhere strictly to the quality standards, safety and environmental aspects as designed.

1.11 To observe, check and report all discrepancies both on drawings and site condition verbally and in writing. Any variation or deviation to the shop drawings must be recorded and reported back to management.

1.12 To assist in checking reports by site managers and supervisors on site progress to facilitate counter-actions and progress claims.

1.13 To co-ordinate and monitor your sub-ordinates and sub-contractor’s performance and evaluate half yearly basing on ISO 9001 and ISO 45001 standards especially on quality and productivity.

1.14 To record and report for fortnightly meetings in office and to carry out all instructions given by the company management in the most appropriate method and sequence diligently.

1.15 To be punctual for work both in the office and at the project site as designated.

1.16 To ensure all site works are to be carried out expeditiously within budget and in accordance to the designed drawings and concept. Any incur of additional cost shall not be allowed without prior official approval from the management.

2. GENERAL RESPONSIBILITIES

2.1 To reduce, reuse and recycle for Sustainable Environment as implemented by the company.

2.2 To report up to the senior management any improvement or any non-compliance.

2.3 To uphold the confidentiality of the company’s business or operation information and prevent any dissemination to any other non-relevant parties whether internal or external without the prior written permission form the Company’s Directors

2.4 To be committed in the company’s objectives and hold steadfast such commitment towards the overall performance of the whole company.

2.5 To assist to suggest to the company’s senior management for any improvement and upgrade for the betterment of the company’s operations.

2.6 You are to excel in all your duties and responsibilities representing the company with the best conduct whenever designated any tender/project by the management.

Requirements:

• Diploma (Singapore) or Degree in Civil or structural or relevant fields
• Minimum 5 years of experience in architectural works such as façade design, cladding, curtain walling & glazing works
• Proficient in MS Office, AutoCAD & BIM
• Good design and sketching skills
• Ability to communicate with all levels of staff

1. Knowledge of AutoCad drafting;

2. Willing to learn new skills and software processing;

3. Suitable candidate will be sent to suitable course;

4. Salary range from 2.2K to 2.8K for new inexperienced staff;

5. Long-term job prospect with established 27 years old company involved in property development and construction industry.

We are seeking an experienced CAD Designer to join our team. This is a critical role that involves working closely with the technical director to provide adjustments as necessary. The successful candidate will be responsible for monitoring and coordinating design and submission progress, preparing and producing shop drawings for submission.

Key Responsibilities:

• Create, review and modify drawings based on project requirements
• Prepare and produce shop drawings for submission
• Monitor & coordinate design and submission progress
• Work closely with technical director/design team and provide adjustments as necessary

Requirements:

• Diploma and above in Diploma in Structural/Architectural/Civil Engineering/Building Construction
• Good interpersonal skills
• Minimum 5 years' relevant experiences in construction firms

Responsibilities:

Prepare shop drawings based on approved working drawings.

Knowledge of reading Architectural, C&S and MEP services drawings.

Knowledge of checking shop drawing is an advantage.

Good to have knowledge of standards, guidelines, code of practice of local agencies in Singapore e.g., BCA, LTA , PUB etc

Able to liaise with others design disciplines.

Able to coordinate and be responsible for the quality of production of all submission drawings.

Supervise the production of 2D drawings with accuracy ensuring drawings produced are according to the Office or the Client's Drafting Standards and Procedures, and the drawing submission schedule is achieved.

Work under the supervision of Engineer and perform work task assigned.

Requirements:

1. Good knowledge in AUTOCAD drafting.

2. Good communication skills.

3. Experienced in working in a construction firm or in a design consultancy.

Responsible for preparation of Civil & Structural Authority submission drawings using Revit and CAD software.

Knowledge in BCA BIM submission standards.

Diploma in Struture

Posses at least REVIT certi cate

Min 5 years relevant working experience using BIM Modeling and AutoCAD

Posses BIM knowledge and experience of Autodesk Building Suite software including Revit/Structure or BIM coordination.

Description:

• Work closely with CAD Supervisor/Engineers to prepare and produce engineering drawings for submission.
• Create, review and modify drawings based on project requirements.
• Modify and revise designs to correct operating deficiencies and clarity of design intent.
• Perform other duties as assigned.

Requirement:

• Preferably with a Diploma in Civil Engineering and above or equivalent.
• Min 2 years of relevant working experience.
• Competent in Microsoft suites and proficient in AutoCAD/ Microstation/ BIM.
• Those without experience but with relevant qualifications and knowledge in CAD and Microstation related softwares will be considered.

Job Description:

1. Develop and maintain CAD Drawings

2. Develop dimensional drawings for layouts and non-dimensional drawings

3. Revise drawings based on instructions/comments from engineers

4. Communicate effectively and work closely with the design team members of individual's project assignment

5. Responsible for receiving, registering, filling and distribution of documents for the detailed engineering section

6. Develop computer generated drawings, isometrics, details, plans, schedules and data sheets

7. Perform other related work duties as assigned by Reporting Supervisor

Job Requirements:

Ø Diploma/ Degree in Architecture

Ø Civil Engineering with Minimum 5 Years of relevant working experience in Singapore.

Ø Preferred Candidates with LTA project experience

• Well Established Company
• Basic $3200 - $4000 + Allowance + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location: Kaki Bukit
• Working hours : Normal working hours
• TRANING PROVIDED

Job Responsibilities:

• Create precise CAD drawings using AutoCAD and Revit, ensuring alignment with project specifications and standards.
• Support design coordination by developing, editing, and updating CAD drawings and BIM models.
• Generate General Arrangement (GA) drawings, including accurate Piping and Instrumentation Diagrams (P&ID) in both 2D and 3D formats.
• Interpret electrical trade requirements to produce layout drawings and single-line diagrams.
• Deliver high-quality AutoCAD/BIM outputs within project timelines and quality benchmarks.
• Prepare proposal, shop, and as-built drawings across all project stages.
• Develop coordination drawings to integrate architectural, structural, M&E, and other disciplines.
• Conduct clash detection and collaborate with project teams to resolve design conflicts.
• Perform site surveys and inspections to verify drawing accuracy and address discrepancies.
• Participate in contractor meetings, communicating design changes and new requirements to engineers.
• Review contractor and vendor design submissions for compliance with project standards.
• Finalize as-built drawings for inclusion in Operations & Maintenance Manuals (OMM).
• Incorporate feedback from clients and consultants to refine and update as-built documentation.

Job Requirements:

• Minimum ITE/Diploma/Degree in Engineering, BCA qualification, or equivalent with 1-2 years of hands-on experience in AutoCAD drafting and/or BIM modelling.
• Proficiency in AutoCAD and Revit (mandatory).
• Experience in drafting for Mechanical & Electrical (M&E) and Fire Protection Services is a plus.
• Training will be provided for those lesser experience.

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

LIONG ZHAO GUAN (R22107632)

EA Recruitment Pte Ltd

EA License No: 21C0492

Job Overview

We are seeking a skilled and experienced CAD Designer to join our team. As a CAD Designer, you will be responsible for developing and producing high-quality engineering drawings for submission.

About the Role

• Collaborate with project managers and engineers to design and develop innovative solutions.
• Create, review, and modify drawings based on project requirements.
• Update designs to correct operating issues and enhance design clarity.
• Perform other assigned tasks as needed.

Requirements

• Degree in Civil Engineering or equivalent required.
• Minimum 2 years of experience in CAD design and drafting.
• Proficiency in Microsoft Office and AutoCAD/Microstation/BIM essential.
• Candidates with relevant qualifications and knowledge in CAD software will be considered.

What We Offer

• A competitive salary package.
• Ongoing training and development opportunities.
• A dynamic and supportive work environment.