1,701 Assistant Engineers jobs in Singapore

• Lead a group of technicians to maintain all the facilities, building, and services systems (ACMV, Plumbing & Sanitary, BMS, Electrical, ELV, Fire Protection System, Waste Water Treatment System, and ASRS system).
• Carry out in-house preventive maintenance and corrective maintenance for all facilities, buildings, and services system
• Attend to day-to-day maintenance operations for all facilities, building services system, maintain proper records of maintenance checklists and documentations.
• Liaising and coordinating with contractors for routine servicing and emergency repair in order to keep all the above systems in operational state.
• Perform standby/duty to attend to system fault or after office hours, weekends and public holidays when required
• Minimise all facilities, building and services system downtime during operation.
• Log, update and maintain all facilities, building and services spare parts, tools and instruments.
• Maintain the system compliance documentation and implementation for workplace safety health (WSH)and regulatory requirements
• Provide training to the technician to maintain all the facilities, buildings and services system
• To learn and maintain any other new/additional systems not mentioned above as assigned by HOD.
• Perform any other ad hoc duties assigned by HOD.

Job Requirement:

• Possess knowledge of Automated Storage and Retrieval Systems (ASRS) will be an advantage
• Good communication skills and teamwork.
• Good understanding of the use handling unit management in SAP EWM /PP will be an advantage.
• ASRS Engineer must have a combination of technical, analytical, and communication skills, as well as experience in warehouse automation systems and project management.

We welcome all who have previously applied to re-apply again if still keen on this role as we will re-assess all applications again.

Other Job Information: 5 days work week, located in Senoko Road

• Lead a group of technicians to maintain all the facilities, building, and services systems (ACMV, Plumbing & Sanitary, BMS, Electrical, ELV, Fire Protection System, Waste Water Treatment System, and ASRS system).
• Carry out in-house preventive maintenance and corrective maintenance for all facilities, buildings, and services system
• Attend to day-to-day maintenance operations for all facilities, building services system, maintain proper records of maintenance checklists and documentations.
• Liaising and coordinating with contractors for routine servicing and emergency repair in order to keep all the above systems in operational state.
• Perform standby/duty to attend to system fault or after office hours, weekends and public holidays when required
• Minimise all facilities, building and services system downtime during operation.
• Log, update and maintain all facilities, building and services spare parts, tools and instruments.
• Maintain the system compliance documentation and implementation for workplace safety health (WSH)and regulatory requirements
• Provide training to the technician to maintain all the facilities, buildings and services system
• To learn and maintain any other new/additional systems not mentioned above as assigned by HOD.
• Perform any other ad hoc duties assigned by HOD.

Job Requirement:

• Possess knowledge of Automated Storage and Retrieval Systems (ASRS) will be an advantage
• Good communication skills and teamwork.
• Good understanding of the use handling unit management in SAP EWM /PP will be an advantage.
• ASRS Engineer must have a combination of technical, analytical, and communication skills, as well as experience in warehouse automation systems and project management.

We welcome all who have previously applied to re-apply again if still keen on this role as we will re-assess all applications again.

Other Job Information: 5 days work week, located in Senoko Road

Responsibilities:-
Perform equipment servicing, trouble-shooting, repair, upgrade
Check materials to ensure meeting required specifications
Identify suitable replacements for obsolete parts
Perform calibration, preventive and corrective maintenance of equipment
Prepare test report after the completion of repair, where appropriate
Ensure proper housekeeping of the workshop, safe workflow and quality of the products
Support set-up, installation & training of new tools/equipment
Requirements:-
Minimum Higher Nitec in Mechanical Engineering or equivalent
Good communication and interpersonal skill
Proactive with good initiatives, problem solving skill and analytical ability
Technical knowledge and hands-on skills on monitoring, troubleshooting, servicing, maintenance and tool recovery would be an added advantage
Able to interpret schematic diagrams (AA) would be an added advantage
Available for standby (rotate) during weekends and public holidays
#J-18808-Ljbffr

• Serving as technical expert to support production and resolve manufacturing issues.
• Supporting engineering changes, deviation request, training, qualification and update procedures.
• Streamline process through supporting continuous improvement and automation implementation.
• Providing support on improvement activities through workflow and digital tools.
• Ad hoc duties

• Min Diploma in Engineering
• Min 1-2 years of experience in production/manufacturing
• Able to think out of the box with strong desire to learn and a great teammate.
• Good communication skills
• Diploma graduates welcome

• Serving as technical expert to support production and resolve manufacturing issues.
• Supporting engineering changes, deviation request, training, qualification and update procedures.
• Streamline process through supporting continuous improvement and automation implementation.
• Providing support on improvement activities through workflow and digital tools.
• Ad hoc duties

Requirements:

• Min Diploma in Engineering
• Min 1-2 years of experience in production/manufacturing
• Able to think out of the box with strong desire to learn and a great teammate.
• Good communication skills
• Diploma graduates welcome!

Interested & qualified applicants, please forward your latest CV to

Overview

Join to apply for the Assistant Engineer role at DSO National Laboratories .

DSO National Laboratories (DSO) is Singapore's largest defence research and development (R&D) organisation, with the critical mission to develop technological solutions to sharpen the cutting edge of Singapore's national security. At DSO, you will develop more than just a career. This is where you will make a real impact and shape the future of defence across the spectrum of air, land, sea, space and cyberspace.

DSO National Laboratories (DSO) is Singapore's largest defence research and development (R&D) organisation, with the critical mission to develop technological solutions to sharpen the cutting edge of Singapore's national security. At DSO, you will develop more than just a career. This is where you will make a real impact and shape the future of defence across the spectrum of air, land, sea, space and cyberspace.

The Engineering Division conducts research and provides engineering services to the whole of DSO in the areas of digital and mixed-signal electronics/microelectronics, radio frequency (RF), electromagnetic interference (EMI)/electromagnetic compatibility (EMC), antennas, as well as mechanical and thermal engineering.

People are DSO’s greatest asset. You will get to realise your career aspirations and develop your own niche either as a deep technical expert or a leader in the team. With frequent career dialogues and a robust training and development framework, we will provide you with the necessary development tools for you to reach your potential. You will also be recognised and rewarded through competitive remuneration packages and scholarship opportunities.

• Design chassis for electronics modules using 3D CAD software
• Design test jigs and fixtures for electronics testing
• Generate 2D Mechanical Drawings
• Perform hardware fabrication with precision metal joining technology
• Perform mechanical assembly and integration of hardware
• Perform mechanical testing of electronics modules

• Diploma in Mechanical & Manufacturing Engineering, Mechanical Engineering, Mechatronics Engineering
• Proficient in 3D CAD design and 2D mechanical drawings generation
• Interest in conceptualising design, implementing in CAD tools and realising them

• Director

• Full-time

• Other

• Defense and Space Manufacturing

Join to apply for the Assistant Engineer role at Cushman & Wakefield

Join to apply for the Assistant Engineer role at Cushman & Wakefield

Get AI-powered advice on this job and more exclusive features.

• Responsible for the management and maintenance of the M&E facilities in the Building.
• Oversee functions and activities of day-to-day M&E systems and prepare a systematic approach to repair, maintenance and improvement work.
• Develop, implement, review and maintain the maintenance regime and processes review processes and implement improvement to building services.
• Oversees the works carried out by the outsourced contractors and to ensure minimal disruption to the building operation.
• Attend all monthly meetings with the Employer and be physically present on-site during emergencies unless obtained the prior permission from the Employer to absent himself/ herself from the meeting or emergencies, and that an authorised representative will be attending on his/her behalf.
• The assistant engineer shall carry out daily inspections under the Contract to ensure that the Site is well maintained. The Employer may as and when require request for joint inspection.
• To carry out daily maintenance of M&E systems/ building activities.
• To supervise and ensure all M&E and building services under the Contract are properly maintained and in efficient operating condition.
• To monitor all scheduled, breakdown and unscheduled and cyclical maintenance works.
• To schedule, monitor and ensure scheduled and breakdown maintenance activities and additional M&E and building services under the Contract are carried out effectively.
• To supervise a team of staff deployed on site.
• To carry out daily inspection of M&E systems and building to ensure that are defects are promptly rectified as spelt out in the service standard.
• Assist in enforcing fire safety rules and policing for fire safety measures for the Site.
• Any instruction given by the Employer to the Engineer shall be deemed to be instructions to the Contractor who shall carry them out expeditiously.
  
  

• Responsible for the management and maintenance of the M&E facilities in the Building.
• Oversee functions and activities of day-to-day M&E systems and prepare a systematic approach to repair, maintenance and improvement work.
• Develop, implement, review and maintain the maintenance regime and processes review processes and implement improvement to building services.
• Oversees the works carried out by the outsourced contractors and to ensure minimal disruption to the building operation.
• Attend all monthly meetings with the Employer and be physically present on-site during emergencies unless obtained the prior permission from the Employer to absent himself/ herself from the meeting or emergencies, and that an authorised representative will be attending on his/her behalf.
• The assistant engineer shall carry out daily inspections under the Contract to ensure that the Site is well maintained. The Employer may as and when require request for joint inspection.
• To carry out daily maintenance of M&E systems/ building activities.
• To supervise and ensure all M&E and building services under the Contract are properly maintained and in efficient operating condition.
• To monitor all scheduled, breakdown and unscheduled and cyclical maintenance works.
• To schedule, monitor and ensure scheduled and breakdown maintenance activities and additional M&E and building services under the Contract are carried out effectively.
• To supervise a team of staff deployed on site.
• To carry out daily inspection of M&E systems and building to ensure that are defects are promptly rectified as spelt out in the service standard.
• Assist in enforcing fire safety rules and policing for fire safety measures for the Site.
• Any instruction given by the Employer to the Engineer shall be deemed to be instructions to the Contractor who shall carry them out expeditiously.
  
  

• Degree/diploma in Electrical, Mechanical Engineering or equivalent with minimum 5 years relevant experience in maintaining M&E systems in the high-rise office buildings.
• Must have practical knowledge of building services and M&E operations such as air conditioning system, electrical system and capable of troubleshooting system breakdowns.
  
  

• Being part of a growing global company;
• Career development and a promote from within culture;
• An organisation committed to Diversity and Inclusion
  
  

• Seniority level Mid-Senior level

• Employment type Full-time

• Job function Engineering and Information Technology

Referrals increase your chances of interviewing at Cushman & Wakefield by 2x

We’re unlocking community knowledge in a new way. Experts add insights directly into each article, started with the help of AI.

Overview

Assistant Engineer role at Cushman & Wakefield. The position is responsible for the management and maintenance of the M&E facilities in the Building, overseeing day-to-day M&E systems, and ensuring effective repair, maintenance and improvements. The role also involves supervising outsourced contractors, attending on-site emergencies, and enforcing safety measures where applicable.

• Manage and maintain the M&E facilities in the Building.
• Oversee day-to-day M&E systems and develop a systematic approach to repair, maintenance and improvement work.
• Develop, implement, review and maintain maintenance regimes and processes, and implement improvements to building services.
• Oversee works carried out by outsourced contractors and ensure minimal disruption to building operation.
• Attend monthly meetings with the Employer and be on-site during emergencies unless prior permission is granted for absence, with an authorised representative attending on the Engineer’s behalf.
• Carry out daily inspections under the Contract to ensure the Site is well maintained; joint inspections may be requested by the Employer.
• Perform daily maintenance of M&E systems and building activities.
• Supervise and ensure all M&E and building services under the Contract are properly maintained and operating efficiently.
• Monitor all scheduled, breakdown, unscheduled and cyclical maintenance works.
• Schedule, monitor and ensure maintenance activities are carried out effectively; supervise a team on site.
• Carry out daily inspections to promptly rectify defects as per the service standard.
• Assist in enforcing fire safety rules and fire safety measures for the Site.
• Respond to Employer instructions promptly and execute them expeditiously.

• Degree/diploma in Electrical, Mechanical Engineering or equivalent with minimum 5 years of relevant experience in maintaining M&E systems in high-rise office buildings.
• Practical knowledge of building services and M&E operations such as air conditioning and electrical systems; ability to troubleshoot system breakdowns.

As a leading global real estate services firm, Cushman & Wakefield offers opportunities for career development, a culture of promoting from within, and a commitment to Diversity and Inclusion. The company focuses on work-life balance, flexibility, technology, autonomy, and opportunities for personal, professional, and technical development with a comprehensive employee benefits program.

We believe in a future where people belong and strive to live DEI values as part of our DNA, beyond recognition days. If you share this vision, consider joining us.

INCO: Cushman & Wakefield

Job Description

Engage with Engineering, Global Procurement with emphasis on cost reduction, cycle time & lead time reduction, material flow, quality improvements, and efficient manufacturing methods & processes for new products and their transition to volume manufacturing.

Create manufacturing flow and material staging. Implement best practices between Sub Contractor and internal manufacturing.

Strategize the cost and labor hours reduction roadmaps with the internal partners including the Business Units (BUs)

Define and create manufacturing and quality documentation (i.e. Operation Method Sheets, work instructions, test procedures, inspection checklists, etc.)

Identify tooling and test equipment requirements for modular and system level and drive through to improve manufacturing efficiency.

Engage in DFX forums to influence design concepts and decisions.

Drive timely solutions for the suppliers by engaging BU team to meet the lead time, quality and cost goals.

• Experience working in a manufacturing or engineering environment with hands-on engagement on manufacturing and productivity activities.
• Bachelor’s Degree in Mechanical/ Electrical/ Electronic/Materials/ Manufacturing Engineering.
• Experience within the Semiconductor/Capital Equipment industry in Manufacturing, Quality and/or engineering roles in equipment assembly and test will be preferred.
• Experience in implementing DFM, DFE, DFX, Lean concepts through manufacturing engineering; Modular assemblies, Feeder lines, Off-line assemblies, flow line and automated testing.
• Knowledge on material fabrication processes, component installation, sub-assembly and final assembly integration,
• Understanding on Bill of Material structure and revision changes

We are an equal opportunities employer and welcome applications from all qualified candidates.