1696 Jurong Engineering Limited jobs in Pioneer

Responsibilities:

• Draw or modify electrical and GA diagrams or write engineering specifications to clarify design details and functional criteria of the equipment with respect to customers' requirement
• Conduct inspection and quality check of electrical equipment
• Conduct installation and troubleshooting of electrical equipment
• Set up and operate test equipment for calibration or configuration of electrical equipment
• Keen mind on quality management, with good documentation, continuous improvement of processes.
• Keen mind on operational planning to ensure good continuous supply of equipment for customers and internal requirement
• Support sales personnel for technical clarifications with customers
• Involve in pre-sales activity of machinery sales, e.g. sizing of generators, studying of tender documents etc.

Requirements:

• Minimum Diploma in Electrical Engineering or any relevant course
• Candidates with no experience are welcome to apply
• Ability to read and amend schematic drawings & circuit drawings
• Experience and knowledge in generators a plus
• Excellent interpersonal and communication skills
• Bilingual in English and Mandarin as need to liaise with Mandarin speaking clients and associates.

About the role

Sun Ace Kakoh (Pte) Ltd is seeking an experienced Electrical Engineer to join our team in the Jurong East West Region. As an Electrical Engineer, you will be responsible for designing, installing, and maintaining electrical systems and components that power our operations. This is a full-time position with opportunities for career development and growth.

What you'll be doing

• Transform Manufacturing Systems - Design and implement sophisticated electrical systems that power our state-of-the-art production lines, directly enhancing operational efficiency
• Lead Critical Problem Resolution - Apply advanced troubleshooting techniques to diagnose complex electrical faults, ensuring minimal downtime and maximum productivity
• Drive Technological Integration - Work with cutting-edge Automation and SCADA systems to optimize manufacturing processes and implement smart factory solutions
• Ensure Operational Excellence - Execute preventive maintenance strategies that maintain peak system performance while extending equipment lifespan
• Collaborate Across Disciplines - Partner with production and engineering teams to implement innovative electrical solutions that address evolving manufacturing challenges

What we're looking for

• Educational Foundation - Diploma in Electrical Engineering required; degree holders are encouraged to apply
• Industry Experience - Minimum 2 years of hands-on experience in manufacturing environments, with chemical industry experience highly valued
• Technical Proficiency - Demonstrated success with motor control systems, three-phase 415V installations, PLC Ladder programming, and Industrial Process Control (IPC) systems
• Software Capabilities - Practical experience with AutoCAD for electrical diagram creation and MATLAB for system analysis and simulation
• Leadership Potential - Natural problem-solver with the initiative to lead projects and collaborate effectively within cross-functional teams
• Safety Commitment - Dedicated to maintaining the highest standards of electrical safety and compliance

Eligibility

• Open exclusively to Singaporeans and Permanent Residents

About us

Sun Ace Kakoh (Pte) Ltd is a leading provider of innovative electrical engineering solutions. We have a strong track record of delivering high-quality products and services to our clients in the Jurong East West Region. Our mission is to help our clients achieve their goals through the efficient and reliable operation of their electrical systems.

Apply now for this exciting opportunity to join our team as an Electrical Engineer.

Responsibilities

• Design and produce single line diagrams of electrical/instrument system and determine the interface/termination diagrams in accordance with equipment specifications.
• Size cables and breakers LV/MV according to applicable rules and regulations.
• Review all electrical equipment, vendor's proposals for technical accuracy and constructability
• Prepare material take off for bulk material orders of power and control cables, cable trays and ladders and various ship electrical equipment and systems according to project contract specifications.
• Prepare electrical equipment foundations/supports and room arrangement/layout, lighting layout, power/control cableway plan, power/control cables routing plan and cable schedules.
• Interface, size and design electrical equipment capacity e.g. switchboards, transformers, navigation, PABX, LAN and fire & gas systems, etc.
• Prepare electrical installation construction standard according to IEC/IEEE shipbuilding practice and international standard.
• Coordinate/execute contract specification requirements and production inputs into engineering drawing/document.
• Provide progress reporting and schedule management of engineering deliverables.
• Coordinate with other production team members, subcontractors and consultants to resolve technical issues onsite which affect the electrical schedule and project deliverables.
• Perform site visits to solve engineering problems when required to determine existing conditions or verify new construction.
• Meet with vendors, client reps, accreditation representatives when required.
• Review and reply to class comments
• Perform any other tasks as may be assigned by the supervisor
• Ensure compliance to relevant government regulations and company's quality, safety, health and environmental (QSHE) policies, practices and procedures at all times.

Requirements

• Minimum 3 years of relevant experience working in a marine/offshore industry either with shipyards or marine equipment manufacturers and a Diploma in Electrical Engineering or related engineering discipline or minimum 6 years of experience working in a marine/offshore industry either with shipyards or marine equipment manufacturers.
• Familiarity with Marine & Offshore rules, regulations and requirements.
• Prior experience in newbuild and conversion of Offshore Supply Vessel.
• Knowledge of Intergraph Software will be an added advantage.
• Good communication skills, meticulous, resourceful, able to multi-task.
• A team player with the ability to work independently as well as in a team.

Job Types: Full-time, Permanent

Pay: $3, $5,000.00 per month

Work Location: In person

Job Description

The Electrical Engineer will be an essential part of our marine vessel operations, ensuring all electrical systems and equipment function safely and efficiently. This role involves the installation, maintenance, and troubleshooting of electrical systems on various vessels. The ideal candidate will have strong expertise in electrical engineering, marine systems, and regulatory standards, while prioritizing safety and efficiency.

Job Accountability

• Design and Installation:
• Oversee the design, installation, and commissioning of electrical systems on board marine vessels.
• Ensure electrical systems comply with international maritime regulations, including SOLAS, IEC, and other relevant standards.
• Maintenance and Troubleshooting:
• Perform routine inspections, testing, and maintenance of electrical systems, including generators, transformers, motors, and control circuits.
• Troubleshoot and repair electrical issues related to propulsion systems, navigation systems, and onboard power distribution systems.
• System Upgrades:
• Work on upgrades and modernizations of electrical systems to improve performance and energy efficiency.
• Conduct feasibility studies for electrical system enhancements, focusing on cost efficiency and reliability.
• Collaboration:
• Work closely with other engineering disciplines, such as mechanical and HVAC engineers, to ensure integrated system functionality.
• Coordinate with vessel operators and other marine personnel to ensure systems are functioning optimally.
• Safety & Compliance:
• Ensure all electrical works meet safety standards and regulatory requirements.
• Monitor compliance with the company's health, safety, environmental, and quality (HSEQ) procedures.
• Document all electrical systems, maintenance work, inspections, and repairs.
• Troubleshooting and Emergency Support:
• Be available for emergency electrical repairs and troubleshooting, both at sea and in port, as needed.
• Training and Mentorship:
• Provide technical training and support to junior engineers and marine crew members on electrical system operations and safety practices.

Educational/Skills Qualification

Education

· Bachelor's degree / diploma in electrical engineering or a related field.

Experience:

· At least 2-3 years of experience in marine electrical engineering,

· Strong knowledge of electrical design, troubleshooting, and maintenance for marine vessels.

Skills:

· Strong analytical and problem-solving abilities.

· Excellent understanding of electrical components, systems, and controls specific to marine environments.

· Strong communication skills, both written and verbal.

· Ability to work under pressure and in diverse working environments (at sea, onshore).

· Good organizational and project management skills.

.

Certifications:

· STCW certification (Standards of Training, Certification, and Watchkeeping for Seafarers).

· Additional certifications in electrical engineering or marine engineering (preferred).

Job Types: Full-time, Permanent

Pay: $3, $3,800.00 per month

Work Location: In person

Responsibilities

• Review documents prepared by Draftsman/Designer and provide technical guidance
• Prepare Equipment Specification, review technical offers from vendors and conduct technical evaluation
• Prepare calculations for electrical system and system studies
• Prepare and review relay protection settings and coordination
• Prepare drawing list for project, monitor drawing schedule for submission of documents, submit drawing and documents to Project coordinator/Engineering manager
• Review vendor drawings to confirm alignment with project and internal specifications
• Attend internal project and engineering review meetings
• Coordinate with inter-discipline engineering team, site engineer and EM on technical related issues
• Support site and commissioning team on technical related issues
• Address and ensure compliance with Owner/OE comments and specifications
• Attend technical clarification meetings with Owners/OE and prepare meeting minutes with follow-up actions.
• Support construction and commissioning teams in resolving technical matters on site
• Conduct site visits to provide technical support and attend site meetings as needed
• Attend FAT (Factory Acceptance Tests) for electrical equipment from HV to LV systems
• Perform tender preparation work when required
• Any other duties from time to time

Pre-requisites

• Degree in Electrical Engineering from a reputable university
• Minimum 5 years of electrical design experience in EPC projects for power plants (Combined Cycle, Cogeneration, Thermal, Biomass, RDF), focusing on electrical systems.
• Good knowledge of codes and standards related to electrical design
• Experience with electrical software for system studies, as well as proficiency in MS Office tools
• Cost-conscious approach with attention to specification accuracy and material optimization
• Good knowledge of 3Dmodel for cable raceway, equipment, and interface checking
• Ability to work independently as well as lead a team depending on project requirements
• Strong communication and coordination skills for interdisciplinary and external stakeholder engagement

Responsibilities

• Assist in construction and basic design development phase. Preparation of equipment, technical specifications, general arrangement, detailed equipment compartment layouts, space coordination and equipment list.
• Review all mechanical equipment, vendor's proposals for technical accuracy and constructability. Understand sizing of equipment and prepare equipment specification.
• Prepare working drawings, establish design criteria standards specification and mechanical construction guideline drawings.
• Develop and check an equipment's handing study for marine spaces and decks.
• Check submittals and prepare the installation or construction drawings when needed.
• Perform site visits to solve engineering problems when required to determine existing conditions or verify new construction.
• Develop and check marine and drilling system PFDs or P&IDs, including equipment size systems and calculate pump system pressure losses.
• Coordinate / execute contract specification requirements and production inputs into engineering drawing / document.
• Provide progress reporting and schedule management of engineering deliverables.
• Coordinate with other production team members, subcontractors and consultants to resolve technical issues onsite which affect the mechanical schedule and project deliverables.
• Meet with vendors, client reps, accreditation representatives when required.
• Review and reply to class comments.
• Perform any other tasks as may be assigned by the supervisor.
• Ensure compliance to relevant government regulations and company's quality, safety, health and environmental (QSHE) policies, practices and procedures at all times.

Requirements

• Minimum 3 years of relevant experience working in a marine/offshore industry and a Diploma in mechanical or marine or related engineering discipline or minimum 6 years working in a marine/offshore industry.
• Prior experience in newbuild and conversion of Offshore Supply Vessel.
• Possessing knowledge in HVAC systems, piping, and mechanical equipment.
• Familiarity with Marine & Offshore rules, regulations and requirements.
• Knowledge of Intergraph Software will be an added advantage.
• Good communication skills, meticulous, resourceful, able to multi-task.
• A team player with the ability to work independently as well as in a team.
• Able to perform marine equipment's sizing.
• Knowledge of drilling engineering processes and equipment configuration will be an added advantage.

Job Types: Full-time, Permanent

Pay: $3, $5,000.00 per month

Work Location: In person

JOB RESPONSIBILITIES:

• Research on concepts to innovate and improve existing/new products
• Plan, design and develop products within quality target and cost
• Consolidate design input and develop schedule of conceptual design for Manager's approval
• Participate in Innovate Project Team Projects - Execute basic R&D projects and focus on main research area: Bike System

JOB REQUIREMENTS:

• Degree in Mechanical Engineering / Mechatronics
• Proficient in CAD / CAE, Finite Element Analysis using NX
• Highly innovative and creative
• Must know how to cycle
• Able to perform overtime
• Open to overseas training / secondment

ENABLE your future through light.

Excelitas is a global technology leader with more than 7,500 employees, focused on delivering market-driven solutions to fulfill the illumination, optical, detection and imaging needs of OEMs and end-users across the biomedical, semiconductor, industrial, consumer products, scientific, security, defense, and aerospace sectors.

ENGAGE with us today and make your contribution to the future Join the team that leading technology companies turn to for cutting-edge photonic innovation. At Excelitas Technologies you are how we EXCEL.

Our facility in Singapore has key functions in research and development, procurement, sales and finance for our Lighting and Detection business lines, in addition to key functions related to our Optics Manufacturing capabilities.

This site produces optical lenses such as spherical, aspherical and plano optics, with large machine shop capabilities and expertise in optical coating and assembly. Our photonic products and solutions serve a wide range of markets and applications in the areas of medicine, life science, industrial manufacturing, defense, and aerospace, as well as research and development.

We are presently seeking an Assembly Mechanical Engineer that responsible for designing and qualifying tooling/fixtures, and acting as a technical liaison between suppliers, manufacturing teams, and internal departments to ensure product performance, quality, cost, and delivery requirements are met.

Main responsibilities:

• Maintain and update the Bill of Materials (BOM), routing, and master data to ensure accuracy.
• Document and track project progress, managing both technical and administrative records.
• Translate engineering drawings from German to English and upload them to local systems.
• Collaborate with assembly process engineers to create Standard Operating Procedures (SOPs) and other required documentation.
• Convert customer requirements into practical design specifications and detailed designs.
• Develop conceptual and final design drawings, BOMs, and assembly instructions for prototyping and production.
• Support prototype assembly, testing, and transition to mass production.
• Review and update engineering data packs and Engineering Change Notices (ECNs) as needed.
• Conduct tolerance analyses and GD&T stack-up analyses to ensure manufacturability.
• Prepare and file documentation required for design, product safety (DFMEA), and regulatory compliance.
• Ensure compliance with EHS (Environmental, Health & Safety) and quality standards (ISO9001, ISO14001, ISO13485, AS9100D).
• Participate in design reviews, risk assessments, and key project meetings.
• Provide technical guidance to process, production, supply chain, and quality teams.
• Supply technical information to support sales, marketing, and customer communications.
• Provide general administrative support to the R&D team.

Requirements:

• Master's or Bachelor's degree in Mechanical Engineering or a related discipline.
• Experience maintaining and updating BOMs, routing, and master data systems for product development projects.
• Skilled in documenting and tracking technical project progress, preparing status reports, and supporting cross-functional teams.
• Experience in developing conceptual designs, generating detailed drawings, and preparing BOMs for prototypes.
• Familiarity with assembly and verification testing of prototypes, including design transfer to production.
• Proficient in conducting tolerance analyses (stack-up, GD&T) on mechanical assemblies to ensure manufacturability and compliance.
• Strong administrative skills in organizing project files and regulatory documents for R&D teams.
• Knowledge of BOM management, routing, and master data processes.
• Proactive problem-solving and process improvement mindset.

Equal Opportunity/Affirmative Action Employer

Minorities/Females/Disability/Gender Identity/Sexual Orientation

Excelitas is seeking leaders and innovators to join our global team Visit:

Overview:

Responsible for designing and qualifying tooling/fixtures, and acting as a technical liaison between suppliers, manufacturing teams, and internal departments to ensure product performance, quality, cost, and delivery requirements are met. The incumbent will create and manage design documentation, ensure compliance with industry standards, lead technical project reviews, and provide cross-functional engineering support throughout the project lifecycle.

Job Description:

• Maintain and update the Bill of Materials (BOM), routing, and master data to ensure accuracy.
• Document and track project progress, managing both technical and administrative records.
• Translate engineering drawings from German to English and upload them to local systems.
• Collaborate with assembly process engineers to create Standard Operating Procedures (SOPs) and other required documentation.
• Convert customer requirements into practical design specifications and detailed designs.
• Develop conceptual and final design drawings, BOMs, and assembly instructions for prototyping and production.
• Support prototype assembly, testing, and transition to mass production.
• Review and update engineering data packs and Engineering Change Notices (ECNs) as needed.
• Conduct tolerance analyses and GD&T stack-up analyses to ensure manufacturability.
• Prepare and file documentation required for design, product safety (DFMEA), and regulatory compliance.
• Ensure compliance with EHS (Environmental, Health & Safety) and quality standards (ISO9001, ISO14001, ISO13485, AS9100D).
• Participate in design reviews, risk assessments, and key project meetings.
• Provide technical guidance to process, production, supply chain, and quality teams.
• Supply technical information to support sales, marketing, and customer communications.
• Provide general administrative support to the R&D team.

Job Requirements:

• Master's or Bachelor's degree in Mechanical Engineering or a related discipline.
• Understanding of 2D/3D CAD and document control practices.
• Experience maintaining and updating BOMs, routing, and master data systems for product development projects.
• Skilled in documenting and tracking technical project progress, preparing status reports, and supporting cross-functional teams.
• Experience in developing conceptual designs, generating detailed drawings, and preparing BOMs for prototypes.
• Familiarity with assembly and verification testing of prototypes, including design transfer to production.
• Proficient in conducting tolerance analyses (stack-up, GD&T) on mechanical assemblies to ensure manufacturability and compliance.
• Strong administrative skills in organizing project files and regulatory documents for R&D teams.
• Knowledge of BOM management, routing, and master data processes.
• Proactive problem-solving and process improvement mindset.