1,061 Qa Technician jobs in Singapore

Job Description

• Perform Failure Analysis (FA) and New Product Introduction (NPI) inspection.
• Perform in-process, in-coming, subcon parts and out-going (Form Fit Function) inspections.
• Review and compile in-process inspection results.
• Communicate with the Machinist on the inspection results and recommend improvements.
• Reverse Engineering.

Requirements:

• Minimum Higher Nitec/ Diploma in any Engineering field (Mechanical, Electrical & Electronics)
• Minimum 3 years of experience in QA or QC of precision engineering.
• Proficiency in Nikon VMR Smart Scope Programming/ OGP smart scope programming/ CMM Programming.
• Good interpreting of mechanical drawing.
• Able to use measuring instruments like caliper, micrometer and profile projector.
• Basic knowledge on Microsoft Office, especially Microsoft Excel.

Others info:

• Walking distance from Ubi MRT Station.
• Must be able to perform rotating shift.
• Salary package up to $2,700 inclusive of overtime and allowances.
• AWS + VB + Group Profit Sharing

Job Types: Full-time, Permanent

Pay: Up to $2,700.00 per month

Benefits:

• Food allowance
• Parental leave

Experience:

• QA/QC: 3 years (Required)

Work Location: In person

About the role

We are seeking a QA Technician to join our team at Heraeus Materials Singapore Pte Ltd in the Pioneer. This full-time role will be responsible for ensuring the high quality and safety standards of our operations. The role includes a shuttle bus service to provide convenient transportation to and from the office.

Job Responsibilities:

• Support daily operational function for in-process quality check of flux, paste, powder and wire:

• a. Checking of CTQs like viscosity, metal content, water content, acid number, halide content, oxygen & carbon content, PSD, spark alloy composition, diameter measurement, etc.

• Wire inspection based on failure catalog during wire production.
• Perform simple application test like Thinky, dispensing and printing assessment.
• Accurate data recording into excels, MES & SAP system.
• Release PO for shipment, ensure product label is correct according to customer specific requirements.
• Create additional COA required by customer.

• Create barcode scan checking required by customer.

• Perform incoming quality check for raw materials, metal alloys, metal powders and flux.

• Checking of CTQs like FTIR, viscosity, water content, acid number, appearance, oxygen content, PSD, etc.

• Ensure supplier COA is available, checked against specifications and uploaded into SAP system.

• Perform outgoing check according to failure catalog before shipment.

• Support engineers for ad-hoc testing.
• Perform 5S at work area, including 5S of documentation (scan PO & worksheet), sample storage fridge & freezer (scrap samples after expiry date).

Job Requirement:

• Min O level or above
• 2 years relevant working knowledge of laboratory is necessary.
• Experience in viscometer, titrator, oxygen analyzer is advantageous.
• Knowledge in Occupational Health and Safety (OHS) and Environmental Management System (EMS)

What we offer

At Heraeus Materials Singapore, we are committed to providing a supportive and enriching work environment for our employees. In addition to a competitive salary, we offer a range of benefits, including:

• Comprehensive medical coverage extended to dependents

• Generous annual leave and bonus scheme

• Opportunities for career development and training

• Employee wellness and recreational activities

Responsibilities

• Carry out all testing activities for server and rack products
• Set up, configure, and maintain servers
• Perform testing processes
• Troubleshoot and analyze production failures
• Maintain and update the test program master list and documentation
• Prepare and revise work instructions
• Handle administrative tasks as assigned

Requirement

• Minimum (Insert Qualification, e.g. NITEC in related field)
• No experience required – fresh graduates are welcome to apply
• Background (work / education / side projects) in programming and debugging is a plus
• Knowledge of Linux Programming, Quartus II, TinkerCad, Python, C++

*Only shortlisted candidates will be notified *

EA Personnel Name: Elsa Adam

EA Personnel No.: R

EA License No.: 14C7215

Job Description:

We are seeking a skilled and detail-oriented individual to join our team as a QA technician. In this role, He/she will be  responsible for documenting and creating comprehensive technical reports & WI (work instruction) related to the overhaul of rotating equipment. The reports will serve as critical documentation for our client & the work instruction will be serve as critical reference for our service team.

Responsibilities:

1. Prepare & create inspection templates of rotating equipment for service team.
2. Gather technical data, specifications, and maintenance records for reference.
3. Collaborate with engineers and technicians to understand the overhaul process.
4. Prepare detailed and accurate technical reports outlining the overhaul procedures, findings, and recommendations.
5. Include clear photographs, diagrams, and charts in reports to support documentation.
6. Ensure that reports adhere to industry standards, safety regulations, and company guidelines.
7. Review and edit reports for clarity, accuracy, and completeness.
8. Communicate effectively with team members to gather necessary information and provide updates on report progress.
9. Maintain a high level of professionalism and confidentiality in handling sensitive information.
10. Any other jobs assigned.

Qualifications and Knowledge:

Higher Nitec/ Diploma in Mechanical Engineering, Industrial Engineering, or a related field (or equivalent experience).

Strong technical writing skills with the ability to convey complex information in a clear and concise manner.

Proficiency in using software tools for documentation, such as Microsoft Word, Excel, and engineering drawing software.

Attention to detail and a commitment to producing high-quality technical reports.

Excellent communication and teamwork skills.

Ability to work independently and manage multiple projects simultaneously.

Basic electrical knowledge is a plus.

Knowledge of rotating equipment is a plus.

Certification in relevant technical areas is a plus.

Job Description

• Perform Failure Analysis (FA) and New Product Introduction (NPI) inspection.
• Perform in-process, in-coming, subcon parts and out-going (Form Fit Function) inspections.
• Review and compile in-process inspection results.
• Communicate with the Machinist on the inspection results and recommend improvements.
• Reverse Engineering.

Requirements:

• Minimum Higher Nitec/ Diploma in any Engineering field (Mechanical, Electrical & Electronics)
• Minimum 3 years of experience in QA or QC of precision engineering.
• Proficiency in Nikon VMR Smart Scope Programming/ OGP smart scope programming/ CMM Programming.
• Good interpreting of mechanical drawing.
• Able to use measuring instruments like caliper, micrometer and profile projector.
• Basic knowledge on Microsoft Office, especially Microsoft Excel.

Others info:

• Walking distance from Ubi MRT Station.
• Must be able to perform rotating shift.
• Salary package up to $2,700 inclusive of overtime and allowances.
• AWS + VB + Group Profit Sharing

Work Location: Jalan Boon Lay

Roles:

• To support daily quality inspection.
• Perform normal receiving and inspection of finished parts timely
• Approved incoming materials by confirming specifications
• Conducting visual and measurement test; rejecting and returning unacceptable materials, returning products for re-work.
• Approves in-process production by confirming specifications
• Make quality inspection report
• Raise Quality Notification
• Participate in root cause analysis and continuous improvement.

Required Experience and Qualification

• ITE, N or O level /Diploma in Mechanical / Aerospace Engineering or other equivalent
• Preferably with experience in process, production and continuous improvement is preferred.
• Ability to work independently and as part of a team
• Ability to read and interpret blueprint and customer specifications
• Competent in review material certs, drawing and specification
• Competent in using conventional measuring instruments such as Vernier caliper, depth gauges, micrometers etc.
• Knowledge in using coordinate measuring machine (added advantage)
• Experience in precision manufacturing (added advantage)
• SAP knowledge advantageous

About the role

We are seeking a QA Technician to join our team at Heraeus Materials Singapore Pte Ltd in the Pioneer. This full-time role will be responsible for ensuring the high quality and safety standards of our operations. The role includes a shuttle bus service to provide convenient transportation to and from the office.

Job Responsibilities:

• To run on rotating shift work to support daily operational function for in-process quality check of flux, paste, powder and wire:
• Checking of CTQs like viscosity, metal content, water content, acid number, halide content, oxygen & carbon content, PSD, spark alloy composition, diameter measurement, etc.
• Wire inspection based on failure catalog during wire production.
• Perform simple application test like Thinky, dispensing and printing assessment.
• Accurate data recording into excels, MES & SAP system.
• Release PO for shipment, ensure product label is correct according to customer specific requirements.
• Create additional COA required by customer.
• Create barcode scan checking required by customer.
• Perform incoming quality check for raw materials, metal alloys, metal powders and flux.
• Checking of CTQs like FTIR, viscosity, water content, acid number, appearance, oxygen content, PSD, etc.
• Ensure supplier COA is available, check against specifications and upload into SAP system.
• Perform outgoing check according to failure catalog before shipment.
• Data entry into SQCpack software for SPC monitoring and alert Engineers for any out-of-control data points.
• Scanning quality worksheets for data archiving and ensure traceability.
• Support engineers for ad-hoc testing.
• Perform 5S at work area, including 5S of documentation (scan PO & worksheet), sample storage fridge & freezer (scrap samples after expiry date).

Job Requirement:

• Min O level or above
• At least 2 years relevant working experience in laboratory.
• Experience in viscometer, titrator, oxygen analyzer is advantageous.
• Knowledge in Occupational Health and Safety (OHS) and Environmental Management System (EMS)
• 1 year contract and convertible to permanent after 1 year

What we offer

At Heraeus Materials Singapore, we are committed to providing a supportive and enriching work environment for our employees. In addition to a competitive salary, we offer a range of benefits, including:

• Comprehensive medical coverage extended to dependents

• Generous annual leave and bonus scheme

• Opportunities for career development and training

• Employee wellness and recreational activities

Job Responsibilities:

• Perform measurement/ testing and reporting of data.
• Train QA inspectors on the measurement of newly transferred parts.
• Able to set up/ program QA test & measurement equipment.
• Prepare document measurement SOP.
• Conduct basic calibration/verification of measuring equipment/gauges.
• Any other task as assigned by the supervisor from time to time.

Job Requirements:

• Min 2 years of experience in a similar capacity.
• Basic knowledge of understanding & interpreting Engineering drawing.
• Knowledge of metrology. Able to interpret GD&T as per ANSI Y14.5M.
• Hands-on experience with OGP smartscope & Mitutoyo CMM (or similar). Able to do programming on the measurement routine.
• Able to work shift & alternate Sat off.

Tuas (with shuttle bus pickup)

Office hrs (Mon–Fri)

Salary: Up to $3200

6 mths contract

Job scope:

• Visual & batch record inspection

• Support deviation investigation & batch release

• Review autoclave & alarm reports

• Maintain SOPs, BOM & master docs

• Perform aseptic audit & in-process checks

• Assist in APQR & inspection plan setup (SAP)

Requirement

•Min. Nitec/Dip in Science or Engineering

•Min 3 yrs QA exp, familiar with GMP & LIMS.

•Exp in pharma/medical device preferred

If interested, please email me at or telegram @alexgohhl

Alex Goh Hock Leong

(CEI.No: R l Recruit Express Pte Ltd (Healthcare & Life Science) | 99C4599)